Author Topic: performance modding discussion  (Read 2842 times)

0 Members and 1 Guest are viewing this topic.

Offline BennyGee

  • antrx.com full member
  • ***
  • Posts: 128
  • Karma: +2/-0
  • Gender: Male
  • i swear officer i didnt know they were Nos buttons
performance modding discussion
« on: May 25, 2005, 01:39AM »
i was wondering if this performance modding timetable would be good to follow or if there is any bad points or modding types in it.

U13 96' bluebird lx.

first mod: cold air intake, done
second mod: timing advance, 98 ron fuel change, done
third:semi-synthetic engine oil, fully synthetic tranny oil changeover
forth:antrx stage 3 performance chip installed.(is this the right chip to get?)
fifth:2.5" mandrel bent exhaust,matching 2.5" cat from old car(?),extractors(big maybe). (is this the right size)

thats it for the performace upgrades i think unless u suggest another average cost/mild gain mod.


It aint a skyline, but itll sure take your excels out.

Offline wicked

  • antrx.com senior member
  • ****
  • Posts: 480
  • Karma: +7/-2
  • Gender: Male
  • U13
Re: performance modding discussion
« Reply #1 on: May 25, 2005, 09:13AM »
I think that's great.

The KA24DE has a relatively long stroke, has plenty of torque and makes the most power at about 5.5K RPM. If you are after top end power, since you are thinking about the stage 3 chip, why not add a CAM too?

http://www.datsuns.com/Tech/datsundyno.htm

As for exhaust size, Noss suggested the use of 2.5" piping and Noss has got a thread on the suitable mods for a stage 3 chip (KA24E), somewhere.   ???

After all these mods, you'll probably start thinking about improving the handling of the car  ;D

Offline PeteSSS

  • antrx.com junior member
  • **
  • Posts: 75
  • Karma: +4/-0
  • Gender: Male
Re: performance modding discussion
« Reply #2 on: May 25, 2005, 09:26AM »
that seems like a healthy list of things to do, and i have a question for u..

how did the motor respond to the timing advance? its something i wish to do, so was just interested in what sort of gains u experienced by doing that, and by how much did u adjust the timing?

Peter
one day i will learn to fly, but for now, hospital seems better

Offline SSS

  • Administrator
  • post whore
  • *****
  • Posts: 8279
  • Karma: +5020/-3
  • Gender: Male
Re: performance modding discussion
« Reply #3 on: May 25, 2005, 11:16AM »
i second the idea on cams. You'll be very suprised what kind of a difference they make.

Offline BennyGee

  • antrx.com full member
  • ***
  • Posts: 128
  • Karma: +2/-0
  • Gender: Male
  • i swear officer i didnt know they were Nos buttons
Re: performance modding discussion
« Reply #4 on: May 25, 2005, 03:01PM »
i upd it to 22*, and i first put 95 ron fuel in it.the gains were alright, i havnt guned the car yet but the accel was more direct i say, and my cai would help as well(night driving with it, u can feel the gain quite well). i then put 98 in it and cant say i felt a difference,maybe smother but thats prob just placebo effect. might up it to 93-4 now im using super premium just to see.

would i have to get my old cam tweaked, find a cam off a ka24e or buy an aftermarket aggresive cam.

yeah i didnt add any no performance mods in but ima get a strut brace(help under steer), lowered springs, and slotted discs with pads.
« Last Edit: May 25, 2005, 03:04PM by BennyGee »

It aint a skyline, but itll sure take your excels out.

Offline SSS

  • Administrator
  • post whore
  • *****
  • Posts: 8279
  • Karma: +5020/-3
  • Gender: Male
Re: performance modding discussion
« Reply #5 on: May 25, 2005, 06:47PM »
You have a KA24DE. you can't use KA24E cams, they have 12 lobes, the 2 DE cams have 8 lobes each.