Author Topic: led washer nozzles (Read 6455 times)

perthTRX · « **on:** Apr 17, 2004, 07:21PM »

i just bought a pair of led washer nozzles of the internet. iÂ have a fair idea how to install it.. though i would like to know if anybody has installem them.. and how did they do it.. just so that i dont get stuck somewher hafway through tht e installation

One thing alwaysÂ get me confused ..is which wire is the positive and negativeÂ one wire is white and black and one wire is black

also would like to know if connecting the wires to the headlight is the best way to go for this

would also like to setup a on /off switch for this somwhere on the dash ....Â any ideas... or suggestions guys

PS :: i have come across a article (http://articles.domestictunerz.com/article.php?ID=157 )with detailed info on this ... but i wanted to know if anyone has done this on thier pintara

Nizzan · « **Reply #1 on:** Apr 17, 2004, 07:45PM »

3 wires?? usually its 2. red and black. perhaps the white wire is for connecting the two leds together?

its normally:

black = connect to car chassis (negative)
red = connect to battery positive (On this line, install a switch inline to break the circuit to turn them on and off)

Note: beware, most of these are illegal for use on street driving, only the white ones are street legal. (In victoria anyway!)

TReks · « **Reply #2 on:** Apr 17, 2004, 07:54PM »

my friend had them on his vp and a coppa told him 2 take em off!

Jtas · « **Reply #3 on:** Apr 18, 2004, 02:38AM »

Quote from: Nizzan on Apr 17, 2004, 07:45PM

3 wires?? usually its 2. red and black. perhaps the white wire is for connecting the two leds together?

i think what he meant was that one of the wires is black and white coloured, and the other wire is plain black. the plain black one would most likely be the negative...

perthTRX · « **Reply #4 on:** Apr 18, 2004, 03:39AM »

Quote from: Nizzan on Apr 17, 2004, 07:45PM

3 wires?? usually its 2. red and black. perhaps the white wire is for connecting the two leds together?

U ARE RIGHt tas rx what i meant was one is black color and one wire is black+white
Its only 2 wires Nizzan.

SSS · « **Reply #5 on:** Apr 18, 2004, 12:59PM »

You shouldn't have wasted your money. Or time.

noss · « **Reply #6 on:** Apr 18, 2004, 02:44PM »

installation is very straight forward and simple, the only problems i've known people to come across is being fined by the cops which is fair enough too.

bungs · « **Reply #7 on:** Apr 18, 2004, 03:03PM »

Quote from: sssgtr on Apr 18, 2004, 12:59PM

You shouldn't have wasted your money. Or time.

Some people might say that about your mods to your car.

Don't turn this thread into another one of those rice threads that are all over the net nowadays. It's been done to death and we all know what the majority of people think of leds/neons etc.

SSS · « **Reply #8 on:** Apr 18, 2004, 05:03PM »

Gee...so i wasted all those thousands on brake/suspension/engine upgrades when i should have filled my car with rice accessories to be a sick [i seem to suffer from tourettes]?

jayjay · « **Reply #9 on:** Apr 18, 2004, 05:08PM »

thats a awesome attitude for a moderator to have $:-\$
this guy is just asking a question , if you not helping he doesnt need your imput
im seriously really getting over some off the people round here , most are good , but theres to many opinionated fools around and its scares me to say that half of them are moderators.
thikn before you post guys and girls
jayjay

SmootH · « **Reply #10 on:** Apr 18, 2004, 05:34PM »

no offence i love all the help i get on these forums from all of the moderaters and users, but sorry to say, im with jay jay on this one

Smooth

Budgie · « **Reply #11 on:** Apr 18, 2004, 05:38PM »

I agree with sssgtr, I don't think he should have wasted his time or money (IMO) however--- I don't think we really need to tell him that.

Off topic end/

/on topic commence

perthTRX · « **Reply #12 on:** Apr 18, 2004, 05:54PM »

Thanks for YOUR opinion

But its My MOney
And MY time

And my decision so i dont think i need anybody else to tell me what i am happy with.
To each his own...so they say !

Thanks a lot moderators .. U are so kind |Really !!

jayjay · « **Reply #13 on:** Apr 18, 2004, 07:54PM »

hey perthTRX , i hope you at least got the info you needed , if not email me and ill help you out any way i can

FLOGTARA · « **Reply #14 on:** Apr 19, 2004, 09:50PM »

I'm with Corsair Ghia!!!

I actually don't mind the washer thingies! Only if the car is modded, they do look a bit gay on stock cars but yeh! If it adds character to the car then go for it!!!

89tipintara · « **Reply #15 on:** Apr 19, 2004, 10:13PM »

Quote from: Budginator on Apr 18, 2004, 05:38PM

I agree with sssgtr, I don't think he should have wasted his time or money (IMO) however--- I don't think we really need to tell him that.

interesting....you just told him....

Jtas · « **Reply #16 on:** Apr 20, 2004, 08:10PM »

Quote from: perthTRX on Apr 18, 2004, 05:54PM

Thanks for YOUR opinion
But its My MOney
AndÂ MY time
And my decisionÂ so i dont think i need anybody else to tell me what i am happy with.
To each his own...so they say !
Thanks a lot moderators .. U are so kind |Really !!

so why ask for opinions?

imaspy · « **Reply #17 on:** Apr 20, 2004, 08:15PM »

thats a fair call actually tasrx

Nizzan · « **Reply #18 on:** Apr 20, 2004, 11:41PM »

no he actually didnt ask for opinions, just assistance on how to install and wire them up.

noss · « **Reply #19 on:** Apr 21, 2004, 12:05AM »

look you all hate us mods anyway, so it wouldnt hurt for me to say 'read the instructions that come with the washer jets first' it isnt really that hard.

instructions would go as follows:

- remove the water connections to your stock nozzles.
- your stock nozzles will simply 'pop' out with a bit of force from the underside.
- insert your led washer nozzles. because they are universal, the have a threaded stem and will need to be fixed with the supllied nuts. this is a bit fiddly
- fit the watter connection to your new nozzles.
- decide where you would like to connect the power to (parker lights, head lights, fog light switch, to the accesories with its own seperate switch)
- connect the positive wire to the positive power
- connect the negative wire to a negative wire or the chassis
- ensure you solder & insulate the connections correctly
- test that they illuminate
- set the water spray correctly
- drive
- get booked by the cops
- post in flames section about those 'c*nt coppers'
- most probably never use them again
- enjoy the multi-directional water spray witch is much better than your stock nozzles

i mean really, how hard is it?

Tim-E · « **Reply #20 on:** Apr 21, 2004, 12:49PM »

Quote from: Flogtara on Apr 19, 2004, 09:50PM

I'm with Corsair Ghia!!!

I actually don't mind the washer thingies!Â Only if the car is modded, they do look a bit gay on stock cars but yeh!Â If it adds character to the car then go for it!!!

if u want to add homosexual character to your car, then they are fantastic!

noss · « **Reply #21 on:** Apr 21, 2004, 01:13PM »

does that mean i have to make you a mod of something tim?

bungs · « **Reply #22 on:** Apr 21, 2004, 01:23PM »

Quote from: Flogtara on Apr 19, 2004, 09:50PM

I'm with Corsair Ghia!!!

I actually don't mind the washer thingies! Only if the car is modded, they do look a bit gay on stock cars but yeh! If it adds character to the car then go for it!!!

I didn't actually say i like the washer leds; That's besides the point. What i'm getting at, is that no matter what you do to your car whether it be a stereo, a sticker, mags, tint, exhaust, neons, it's all coming to the same conclusion that it is 'rice'. If people don't like it, why whinge about it 50 times? Surely once is enough to get the point across.

And anyway, comments like "You shouldn't have wasted your money. Or time." aren't needed in a thread where the bloke asked for advice, not an opinion.

evenflow_trx · « **Reply #23 on:** Apr 21, 2004, 01:25PM »

Quote

And anyway, comments like "You shouldn't have wasted your money. Or time." aren't needed in a thread where the bloke asked for advice, not an opinion.

I concur.

Tim-E · « **Reply #24 on:** Apr 21, 2004, 01:26PM »

hahaha yes, head of the car version of the fashion police

aussie-gli · « **Reply #25 on:** Apr 23, 2004, 02:40AM »

Quote from: perthTRX on Apr 18, 2004, 05:54PM

Thanks for YOUR opinion

But its My MOney
AndÂ MY time

And my decisionÂ so i dont think i need anybody else to tell me what i am happy with.
To each his own...so they say !

Dont think i've seen them on a U12 before mate, so get some pics up when they're in... Just note that any colour other than white on the front of ur car is pretty much illegal. i've seen people getting around with White nozzle things, I'm assuming they're ok??

You should invest in some LED parkers. I made some up with ultra bright white leds. They look sweet! they're a really cold white/blue colour and look mad... Only cost a couple of bucks to make too!!!

On another note, Can everyone with the â€˜that mod is shit/gayâ€™ attitude please pull their heads out of their arses??? It makes the whole atmosphere in here shithouse!

Jtas · « **Reply #26 on:** Apr 23, 2004, 02:46AM »

any chance of getting a picture of your parkers aussie?

Nizzan · « **Reply #27 on:** Apr 23, 2004, 08:51AM »

Quote from: aussie-gli on Apr 23, 2004, 02:40AM

On another note, Can everyone with the â€˜that mod is shit/gayâ€™ attitude please pull their heads out of their arses??? It makes the whole atmosphere in here shithouse!Â

i agree

SSS · « **Reply #28 on:** Apr 23, 2004, 09:53AM »

In future open your eyes and read the instructions, or better yet take it to a workshop to install it for you.
Then you won't cop smart ass remarks from me.

noss · « **Reply #29 on:** Apr 23, 2004, 10:54AM »

there have been led washer nozzles on a u12 as well, if you want something new that hasnt been done before, you gotta be a bit more on the ball.

Author Topic: led washer nozzles (Read 6455 times)

TReks

89tipintara