[ antrx.com ]

U12 Bluebird, Pintara & Stanza => the style department => Topic started by: NathansU12 on Nov 18, 2015, 10:19PM

Title: 4x 144.3 15x8 -10 rims
Post by: NathansU12 on Nov 18, 2015, 10:19PM

will i be able to fit these

Title: Re: 4x 144.3 15x8 -10 rims
Post by: noss on Nov 19, 2015, 07:43AM

you can fit them, they have the right stud pattern, but unless you're going to flare the guards they're likely going to be illegal to run (can't have tyre poking out guard)

-10 offset is going to stick so far out the side of your car it's not funny. you're looking at about 66mm outside the guard. no amount of tyre stretch is going to pull that in. you'd need to run massive camber but then you'd be running on the very edge of the stretched tyre and might as well just install some pizza cutters as your wheels.

Title: Re: 4x 144.3 15x8 -10 rims
Post by: NathansU12 on Nov 23, 2015, 06:09PM

114.3 stud pattern,,,,

that will work... :) thanks boss!

Title: Re: 4x 144.3 15x8 -10 rims
Post by: NathansU12 on Nov 23, 2015, 06:22PM

114.3  15x8 +10?

Title: Re: 4x 144.3 15x8 -10 rims
Post by: NathansU12 on Nov 23, 2015, 06:29PM

how much dish can i go still being legal, dont mind rolling the guards

Title: Re: 4x 144.3 15x8 -10 rims
Post by: noss on Nov 25, 2015, 03:09PM

you're probably not going to get a lot. i used to have 17 x 7 +43 with 205/45, they rubbed if i ran 215/40. no dish on my old wheels though so can't really comment.

you could probably push it a bit further with stretched tyres, but things like camber plates will be harder to find and you'll have to grab them from other makes of cars to adapt to the u12.

you're really going to need to test fit some wheels, but maybe start with something like http://www.willtheyfit.com/

Title: Re: 4x 144.3 15x8 -10 rims
Post by: NathansU12 on Nov 25, 2015, 04:35PM

thanks mate, i think a 15×8  +25s should be just squeeze in