[ antrx.com ]
general => for sale => Topic started by: Dommo on May 8, 2012, 08:09PM
-
Ok guys,
In the end after much umming and arring I couldn't bring myself to part this out. I will sell it as is as a whole. As mentioned previously I had a very low speed front end collision but have fixed the front bumper completely to before accident condition, but the front still has a slightly bent bonnet and slightly bent top radiator mount, the bonnet latch still operates correctly though. No parts were harmed in the collision just my pride and joy got a fat lip.
As for what has been parted out, everything listed in the post is still in it, everything else is stock, car is completely drivable so you could just get an unreg permit and drive away.
Here are the specs:
Performance:
PW11 SR20DET (80,000km since new rings and bearings)
NISTUNE ECU upgrade
Pulsar GTiR 5 Speed Manual
Excedy Sports Tuff Clutch
T28/T04 Hybrid Turbo (running 17 psi)
3" Turbo Back Exhaust
600x300x75 Intercooler
Turbosmart Boost Controller (Manual)
Turbosmart BOV
Walbro 255 LPH Fuel Pump
SARD Rising Rate Fuel Regulator
17" Data Champ TE37 Wheels
New tyres all round 215/45/R/17's 15000km ago
Slotted RDA Front rotors
Interior:
BES Turbo Timer
Autometer Boost Gauge
Custom ATTESA door trim
Custom A pillar covers with tweeter mounts
ADM U13 SSS Series II Custom fit interior transplant
S15 side indicators
Smoked rear taillights
Around 210,000kms
Engine and gearbox work done by previous owner end of 2010
Most pics of stuff in the car are outlines in the worklog, but if you would like a video of it running I can direct you to one. I will try to put a pic up of the damage oncew i wash the dust off it as it has been sitting in my garage a few months, still starts and runs with ease. Anythign else you need or want just let me know.
Price $4500 OR make an offer, all offers considered, will consider swap for motorbike. but please keep all offers to the thread
Location Glen Waverley Vic
You will struggle to get better bang for buck I assure you. Rego has run out as I have a new car.
-
Pictures:
(http://www.overclockers.com.au/pix/image.php?id=f6zzd&f=1') (http://'http://www.overclockers.com.au/pix/index.php?page=image&id=f6zzd')
(http://www.overclockers.com.au/pix/image.php?id=20fys&f=1') (http://'http://www.overclockers.com.au/pix/index.php?page=image&id=20fys')
(http://www.overclockers.com.au/pix/image.php?id=qpepo&f=1') (http://'http://www.overclockers.com.au/pix/index.php?page=image&id=qpepo')
(http://www.overclockers.com.au/pix/image.php?id=xovq6&f=1') (http://'http://www.overclockers.com.au/pix/index.php?page=image&id=xovq6')
(http://www.overclockers.com.au/pix/image.php?id=ozjwe&f=1') (http://'http://www.overclockers.com.au/pix/index.php?page=image&id=ozjwe')
-
nice looking bluebird, good luck with the sale
-
Link to worklog: http://forums.overclockers.com.au/showthread.php?t=939292 (probably have to login/register)
Original for sale thread here: http://www.antrx.com/smf/index.php/topic,18266.0.html
Dyno sheet ~150kW at the wheels (safe tune at about 17psi): http://ocau.com/pix/6zqft
-
Part out bump
-
How much for the nistune ecu ?
-
How much for the nistune ecu ?
$500 Will come with recipt, it is only 5 months old.
-
where is the car located?
-
$500 Will come with recipt, it is only 5 months old.
Work for front wheel drive sr20s ? Non turbo ?
-
where is the car located?
Glen Waverley Vic 3150
Work for front wheel drive sr20s ? Non turbo ?
Deffinate maybe haha, you would have to ask somone more qualified than me to answer sorry. If your OEM ECU is the same as the OEM Bluebird opne you should be ok but im no expert..
-
Just wondering how much you are pulling apart to sell on this one.
I could use a rear bumper, and steering wheel if in good nic. Are you selling them and how much?
Thx
-
rear bumper is immaculate as I only just had it re-sprayed :-\ so $200 for that and ill throw in the steering wheel (which is in average condition, also has cruise control buttons)...
-
rear bumper is immaculate as I only just had it re-sprayed :-\ so $200 for that and ill throw in the steering wheel (which is in average condition, also has cruise control buttons)...
Done deal! Hope its a good colour match to mine or i'll have to paint it again.
Can you email so we can tee up delivery. [email protected]
Cheers! Dean
-
Car parts on hold just for the next couple of days as there isd a potential buyer for the whole car, if this falls through or nothing happens by the end of the weekend I will begin stripping the car for tjhe parts for all current interested parties.
Cheers
Dommo
-
Fair enough... thanks, let me know.
-
Sale fell through, pats back up and available... so people still wanting parts let me know, also there is a member who now has driven the car and can attest to the strength of the engine and performance parts.
Cheers
Dommo
-
Yep I took it for a spin and it feels quick. Mechanically all seemed good.
How much do you want for turbo, exhaust manifold (if aftermarket), intercooler piping and intake piping?
-
Im still looking at the rear bumper and steering wheel as agreed the other week.
Please email so we can get it happening sometime over Christmas. Thx
[email protected]
-
Also how much for the front and side indicators? Probably will need some other small bits and pieces too.
-
How much (separately) for the shocks+springs and the wheels?
They'd fit onto a regular SSS right?
-
i need a handbrake lever, i modified mine a effed it up.
-
Also how much for the front and side indicators? Probably will need some other small bits and pieces too.
How much do you want for turbo, exhaust manifold (if aftermarket), intercooler piping and intake piping?
did u wan the FMIC and BOF as well? Did u get the other BB?
i need a handbrake lever, i modified mine a effed it up.
$50 all yours
How much (separately) for the shocks+springs and the wheels?
They'd fit onto a regular SSS right?
100 a corner for shock and springs, 200 a corner for wheels + tyres, tyres will defs fit, and AFAIK the shocks and springs are the exact same mounts. You could also use some dual pot front calipers on your ADM bluebird couldnt you? ;)
-
100 a corner for shock and springs, 200 a corner for wheels + tyres, tyres will defs fit, and AFAIK the shocks and springs are the exact same mounts. You could also use some dual pot front calipers on your ADM bluebird couldnt you? ;)
So $400 for all 4 shocks and springs and $800 for all 4 wheels and tyres?
I could use a lot of things but I'm a poor kid ;)
-
did u wan the FMIC and BOF as well? Did u get the other BB?
I'll get a new FMIC and already got a BOV. I bought a one owner since import (2000) attesa from adelaide. Engine bay is pretty much stock so need some of your go fast bits. :)
-
Keep the stock BOV mate, don't fit an atmo unit.
-
Came with aftermarket atmo BOV. Lol has some liquid nails filling a leak.
-
Dibs on the shocks and springs just let me know when your ready
-
I'm keen on the gearbox, linkages, shifter/boot/knob, clutch slave & lines and pedal and associated gearbox mounts.
Basically, all that's needed to convert an auto U13. I'm in Melbourne/Geelong and am happy to come and strip those parts if need be, with some beers along the way :)
-
So $400 for all 4 shocks and springs and $800 for all 4 wheels and tyres?
Yep, yours if you buy the lot otherwise springs and shocks are going to mika8, but to be fair on Mik i cant wait too long. only putting you first as you enquired first and are multi buying.
Wish I had nore cash too, hence the part out and not just selling as a whole dirt cheap.
Dibs on the shocks and springs just let me know when your ready
see above mate, yours if he falls through.
I'm keen on the gearbox, linkages, shifter/boot/knob, clutch slave & lines and pedal and associated gearbox mounts.
Basically, all that's needed to convert an auto U13. I'm in Melbourne/Geelong and am happy to come and strip those parts if need be, with some beers along the way :)
I take it an auto attesa? otherwise I dont think she'll mount up to a KA24.. if so I wish I bought an engine crane today liker i intended and not a compressor and air tool set ahaha, but I suppose I will need both to get all that, ahppy if you want to come and help we shall just have to work out a price.
Also how much for the front and side indicators? Probably will need some other small bits and pieces too.
How much do you want for turbo, exhaust manifold (if aftermarket), intercooler piping and intake piping?
The tubo is $500, the manifold is stock with a spacer which u will need for the turbo, say $50, all piping yours for $200, lights $50 for the lot, and ill throw in the pod filter and braided oil/water lines, and catch can for an extra $50.
-
Will be for an auto attesa mate, if the car is good (bar it's fucked auto box) then I will grab all the 5spd bits off you.
Am happy to make a 'working bee' out of it if need be after we sort a price.
I will let you know how the auto car turns out (its in QLD, a member on here is going to check it out for me).
-
Will be for an auto attesa mate, if the car is good (bar it's fucked auto box) then I will grab all the 5spd bits off you.
Am happy to make a 'working bee' out of it if need be after we sort a price.
I will let you know how the auto car turns out (its in QLD, a member on here is going to check it out for me).
I bet this pretty pink u13 is the one you're looking into... :P
http://www.boostclassifieds.com.au/advert/749190-1993-Nissan-Bluebird-Atessa-for-Sale.html (http://www.boostclassifieds.com.au/advert/749190-1993-Nissan-Bluebird-Atessa-for-Sale.html)
-
Mate i want your wheels and tyres. Pm me your price. Thanks
-
Mate i want your wheels and tyres. Pm me your price. Thanks
Messaged you mate, if you havent heard anyting just message me, its $200 a corner so $800 for the lot.
Bump, Strut brace, Springs & shocks gone
Cheers
Dommo
-
I'll take the front and side indicators if they're in good condition. Also how much for the passenger front and rear exterior door handles, clock and aircon control panel (if they're in good condition)?
PM me when you're free and ill come pick them up.
-
I'll take the front and side indicators if they're in good condition. Also how much for the passenger front and rear exterior door handles, clock and aircon control panel (if they're in good condition)?
PM me when you're free and ill come pick them up.
Hey mate, handles are ok, but rear passenger one (I think) has a broken corner/edge on the chrome bit, so its missing like a cm. U can have them all for 50... the clock works a treat but always seems to indicate im always running late to work... might be a user error ::)... and the Climate control works just fine, except as on every bluebird I have ever been in most of the globes are blown, how bout another $50 for both those as well.
-
I'll pass on the handles, mine have the same broken edge. Air con on mine has blown globes so might just change the globes but if your clock stays lit up I'll take that for $10ish.
I also need a spring or something for the centre console lid so the opening/closing tab works properly.
-
I'll pass on the handles, mine have the same broken edge. Air con on mine has blown globes so might just change the globes but if your clock stays lit up I'll take that for $10ish.
I also need a spring or something for the centre console lid so the opening/closing tab works properly.
Oh no good, which ones are broken? only one of mine is.. and the lack of a spring is a feature of every u13.. never gonna fix that i wouldn't think... If your interior is boring you mine is custom to fit an ATTESA, cause honestly pulling apart the dash for a $10 clock is a bit of a PITA..
-
That's fine, don't worry about the clock. Both passenger side handles have the bottom right corner snapped off.
Do you have any photos of the custom pillar tweeter mounts?
Also when can I come pick up the indicators?
-
That's fine, don't worry about the clock. Both passenger side handles have the bottom right corner snapped off.
Do you have any photos of the custom pillar tweeter mounts?
Also when can I come pick up the indicators?
Hey mate, anytime during the next week should be good, ill try and get some tweeter pics tonight. I also have custom ATTESA door card pockets. annoying how its the same side, bit i can sell you one good one if it will help you out.
-
Can you give me anymore details on the turbo? Having trouble trying to find accurate info on it.
-
Can you give me anymore details on the turbo? Having trouble trying to find accurate info on it.
Not realy sorry mate, All the info I have would be on this site's previous worklogs on the car, all I can say is what I already have, plus as you hav already seens its pretty sound.
-
Bump, No longer for part out, will sell as whole
Cheers