[ antrx.com ]
U12 Bluebird, Pintara & Stanza => maintenance issues => Topic started by: raider007 on Jul 17, 2010, 01:20PM
-
;) howdee all :)
today i wondering if anyone has a nissan parts list for pintara ka24e 's ?
if you do please post a reply :)
does anyone have there own nissan parts list...for pintara ka24e's ?
if so i like to see that in a reply...
does anyone know the nissan parts for ka24e engine and transmission mounts...?
if so please post a reply...
lets get a pintara u12 ka24e parts list...for everything that we every bought original
it seems we may be able to grab parts for pintara's from these others...
ford corsair
stanza
pathfinders
so please lets see what we can collectively come up withj...
but a nissan parts list would be real handy :) to all those that work for nissan who are members?
thanks
-
you can get solid engine mounts from SSS(forum member)
-
;D thanks ped...i knew that...:)
however i am still after the original part numbers...
at this stage i have only managed to find 2 engine mounts to rebuld in my car...
from visits to the wreckers...
i got a top mount...yeee haaa...easy as to get out...
i got a rear mount....yee haaa...the greatest bitch to get out...
i got to get a auto mount...will also be easy as...
i want to to replace the lot as a set...and do them single fit at a time.
there is no sense mixing mounts....of different ages..
and worse if you mix rubber and poly as in sets...
put a total poly set on or put a total rubber set on...is the go..
my mate needs a set as well...but i can not convince him on a poly set...and the guy has no pc...
so i doing his research as well...but he wants full rubber !
to add things his is a manual ka24e
where mine is a auto ka24e
so like it if anyone who has mounts out..defective could look at the part numbers please..
or if you hve new set of rubbers...mounts..
only the ka24e mounts interest me...
but the sake of interest ...anyone with ca20e can table there stuff ..that way it will all be in the 1 thread..
but engine mounts numbers...and any nissan pintara ka or ca part nissan can be included ..just dont forget the detail..
eg...
1990 ka24e auto exhaust spring 1110-3330 $20-35
that way we all know what it is...
but at the moment...of great interest is engine mounts ka24e autos/man's
thanks
-
I couldn't bring the table up here, but go to http://mackayrubber.com.au/engine.php and put in Nissan Pintara, I deal with Mackay Rubber for work so I may be able to get prices off them for their OE replacement mounts.
-
thanks SSS :)
i already had been to been to mackay rubber site and also been to kelpro and checked the cross ref for each....(should be right)
kelpro and mackay only sell to...autobarn/supercheap/repco/bursons/autotrend/ etc etc etc..or a client...
ka24e mounts only!
Kelpro Mackay
mt8619 a6003 top engine mount drivers side
mt9336 a6004 auto gearbox mount
mt8117 a5484 man gearbox mount
mt8593 (none listed) crossmember rear mount
mt8621 a5004 crossmember front mount for manuals*
it appears mackay dont make the rear crossmember mount...
See what price Mackay quote you...and if anyone can Get Kelpro's cheap ...that would be great too
my untested unchecked nissan part numbers....for ka24e only !
11211-65e10 top drivers side mount
11220-65e22 auto gearbox mount
11220-65e02 man gearbox mount
11320-65e00 crossmember rear mount
11270-30r00 crossmember front mount (mans only )*
i would like it if anyone can confirm the above
let me know sss what prices you can get :) i am just about ready for sending a set to you..for rebuild...i need your details address for that..
so you can email me or pm me :) thanks
but i need a rubber set too :) for mate ...thanks :)
-
I can't promise anything, but I will speak to my contact there and see what he can do for me. I would strongly urge your friend to go with my mounts in the softer 80 shore urethane, I have the same mounts in my daily driver and the noise/vibration/harshness is very marginal over normal rubber mounts.
My mounts are a lot more durable too.
-
i am working on him sss
but its slow...
my problem is i not got any to show him...
and i not got any car with them in working and drivable for his inspection and test drive..
and no else in bundaberg i know has a set...either....in a working car...
but i got 2 top mounts ..drivers side mounts...
i got 1 only bottom crossmember mount
i got 1 only auto gearbox mount...
i need 1 more of each...for 2 complete sets... a little hard to come by where i am...
but i got another visit to wreckers coming up...
thanks ma8
:)
-
I've asked my contact and he will get back to me, they are busy so please be patient!
I'll send you some details shortly for where to send the mounts and for the deposit.
-
PM'd you pricing on the OE Mackay mounts raider.
-
thanks sss :)
i returned pm :)