[ antrx.com ]
U12 Bluebird, Pintara & Stanza => maintenance issues => Topic started by: Kranzy on Aug 26, 2008, 11:43AM
-
Hey guys,
I know this isnt really a U12 issue so to speak but its in my u12 so theres my reasoning :P
Anyway my water pump is currently leaking a little bit at the pump so a new one is in order.
What im after is if anyone has done this, and if they have are there any tips and tricks to make it easier?
Having a bit of a look i should be able to get access to most of it through the drivers side wheel arch. Id much prefer to not need to take the engine completely out. I will be replacing my engine mounts so i think ill drop the crossmember and lower that side of the engine down to access it a bit better.
Any other help would be great!
Cheers
Kranzy
-
Well i replaced the waterpump on a Ti from the drivers wheel arch. Had to turn wheel full lock, remove all plastic guards and removed all the aircon stuff to make it easy.
-
yeah ive done the water pump in my bluebird, i think i dropped the engine mount out and lowerered the engine down, theres a fair bit of room there once you take hte belt and pulley off. I ordered a pump for a nx coupe to make it easier.