[ antrx.com ]
antrx technical discussion => general technical discussion => Topic started by: f8tal02118 on Feb 2, 2008, 11:51PM
-
hi i am new to this site a nissans sorry if ive put this in the wrong area . just wanted a few questions asked can i put lowered springs (coils) with out having to change any think else also i brought a rpm taco as my 1990 Nissan (u12) pintara dose not have 1 its a twin coil just wanted to know where 2 hook the rpm signal wire to on the coils on know where it goes on the old coils but not the new electronic 1s? and how would i go about finding out what pistons' cylinders cam valves and so on? as i brought the car of a lady but before them the first owner has done it up and she was going to do it up but didn't but she said what mods had been done but i want to find out what brand most of the stuff is ? about the rpm taco can i hook it up with out having to get after market gauge kit and if i need a wiring loom or harness what ever you want to call it first time for me working on a Nissan's i know more a bout Holdens then any other car wiring that is. if any can help i will be great full 4 your help
-
Wow thats a long sentance.
I can answer a few of your questions but the rest i cant understand.
You can fit lowered springs to you car without fitting anything else, It would be advised to match shockers to the springs and get a wheel alignment.
You can hook the tacho signal wire up to either one of the coil negatives. Wiring a tacho is the same on any vehicle.
Your not going to find out what brand any internal engine parts are without pulling it apart.
-
already pulled it a part had to replace all gaskets and the head gasket as it had major blow bye. Also had to do the master brake cylinder as it would work most times then when reversing the car smashed a tail light a dented the bumper but no bigee. Any 1 from Adelaide know where i can get a set of tail lights or just 1 i went to city dismantlers and they want $88 dollars for just 1 tail light but there second hand also there not worth $88 dollars as there faded by the sun or cracked and auto barn quoted me $145 dollars for 1 and at u-pull it they are also sun damaged and how would i find out what model pintara i have as it has been de-badged also where can i find body kits for it and engine mounts thanks if you can help
-
Twin spark suggests it is the Gli or the Executive.
-
already pulled it a part had to replace all gaskets and the head gasket as it had major blow bye. Also had to do the master brake cylinder as it would work most times then when reversing the car smashed a tail light a dented the bumper but no bigee. Any 1 from Adelaide know where i can get a set of tail lights or just 1 i went to city dismantlers and they want $88 dollars for just 1 tail light but there second hand also there not worth $88 dollars as there faded by the sun or cracked and auto barn quoted me $145 dollars for 1 and at u-pull it they are also sun damaged and how would i find out what model pintara i have as it has been de-badged also where can i find body kits for it and engine mounts thanks if you can help
You can find out the model on the car plates in ur engine bay. 2L pintaras were either Executives (AUTO) or GLI (Manuals).
For the tail lights, I have a spare set u can have for $40 ($20 each) pp so if u want them then pm me.
For Engine mounts go to Global Auto spares (cheapest) or repco or supercheap (expensive) Id recommend getting the rear one urethaned by SSS because u will keep on replacing it and its not cheap. Ive had my car 3 years and im on my 3rd one.
Bodykit: Good luck. Scower forums and ebay. Beg, do sexual favors for them. Or you could pay more money and get a modified siliva or wrx one.
-
You can find out the model on the car plates in ur engine bay. 2L pintaras were either Executives (AUTO) or GLI (Manuals).
For the tail lights, I have a spare set u can have for $40 ($20 each) pp so if u want them then pm me.
For Engine mounts go to Global Auto spares (cheapest) or repco or supercheap (expensive) Id recommend getting the rear one urethaned by SSS because u will keep on replacing it and its not cheap. Ive had my car 3 years and im on my 3rd one.
Bodykit: Good luck. Scower forums and ebay. Beg, do sexual favors for them. Or you could pay more money and get a modified siliva or wrx one.
might make my own body kit just the front first ill get a pintara bumper from u pull it to start off with a shape and a place 2 start