[ antrx.com ]

antrx technical discussion => general technical discussion => Topic started by: slim on Sep 9, 2007, 03:32PM

Title: Seat Belts
Post by: slim on Sep 9, 2007, 03:32PM
* Emergency stop can be tested by pulling hard and fast on the seatbelt.
   The belt is meant to come to a hard stop and wont extend further unless released. *

After driving around last night i notice my seat belt failing to retract at times unless pulled out further.
Im just wondering if other bluebird owners have a similar problem.
Title: Re: Seat Belts
Post by: Colby on Sep 9, 2007, 03:50PM
I find mine wind up really slowly if at all.  Seem to work alright for emergency stop though.
Title: Re: Seat Belts
Post by: greenbird on Sep 9, 2007, 04:07PM
Mine are the same Colby....
Sometimes, part of the problem is that over time the plastic bit that the belt runs through at the top (and then back down to the buckle) gets gunked up with grime and crap. Try and get in there and give it a clean up, so that the belt has a nice clean and smooth surface to slide over... This may (or may not) help!
Dan.
Title: Re: Seat Belts
Post by: hrmmmm on Sep 9, 2007, 05:08PM
Also you can clean the actual belt. Sometimes they get a waxy build up that prevents them from retacting properly. My car has this problem and so did my bosses falcoon. A quick clean and good as gold. All I do is give it a good wipe with some warm slighly sopay water every now and then, until I can be bothered to remove the belts and clean them properly.

And yes I am aware this is in the u13 bluebird/altima section.
Title: Re: Seat Belts
Post by: slim on Sep 9, 2007, 05:19PM
Langers_87 after i posted this i realised that it should have gone in the general technical discussions area.
Mods feel free to move it
Title: Re: Seat Belts
Post by: mixmarster on Nov 20, 2007, 11:17AM
i have noticed that my back seat belts have been playing up big time u have to put them in really slow or they will just continue to roll out ..
the frount drivers seat belt u have to hold down the press sign to get it to work ....to
eg puting the seatbelt in the hole
has anyone had theses problems ????
can it be fixed an how
or do i just got blow 100bux or so on 2nd hand ones???
Title: Re: Seat Belts
Post by: f8tal02118 on Feb 3, 2008, 10:47PM
i have noticed that my back seat belts have been playing up big time u have to put them in really slow or they will just continue to roll out ..
the front drivers seat belt u have to hold down the press sign to get it to work ....to
e.g putting the seatbelt in the hole
has anyone had theses problems ????
can it be fixed an how
or do i just got blow 100bux or so on 2nd hand ones???


 Ive had the same problem for the  seatbelt in the hole  problem i pulled the press button off and put some singer oil in there and buckled it up worked a treat 4 me. yes i know singer oil is for the singer sewing machine but ha i got it from the local shops
Title: Re: Seat Belts
Post by: mixmarster on Feb 11, 2008, 01:46PM
cheers mate
thanks for the advice :)
Title: Re: Seat Belts
Post by: f8tal02118 on Feb 17, 2008, 01:19PM
cheers mate
thanks for the advice :)

if that don't work go to u pull it (as i know your in sa like me)  get some there make sure they work first

a friend got some at the Elizabeth u pull it.
he paid only 25 bucks for the whole lot but they charge different depending on the person. there still cheaper then city dismantlers