[ antrx.com ]

U12 Bluebird, Pintara & Stanza => the style department => Topic started by: icebreaker on Dec 7, 2006, 08:15PM

Title: U13 seats into U12
Post by: icebreaker on Dec 7, 2006, 08:15PM

I am looking to replace the seats from my corsair with the seats from a u13 blubird sss. Has anyone done this before and do the back seats fit?
I am sure the front's will be fine,just the back I am concerned about..

Thanks in advance! ;D

Title: Re: U13 seats into U12
Post by: rathies on Dec 7, 2006, 08:49PM

I'm pretty sure the rears did fit, someone said it on here once. search is your friend.

Title: Re: U13 seats into U12
Post by: icebreaker on Dec 7, 2006, 10:19PM

cheers mate, thanks for that.

Title: Re: U13 seats into U12
Post by: Jono on Dec 7, 2006, 10:54PM

Yes the rears do fit fairly well, you need to make up some brackets to hold the seat back to the parcel shelf area, and you need to drill some holes for screws to screw the bottom cushion in.

There is about an inch gap either side of the vertical part of the seat, and the front of the bottom cushion sits forward from the original position by about 2-3 inches.

Title: Re: U13 seats into U12
Post by: icebreaker on Dec 8, 2006, 07:09AM

thank-you very much mate.
That will make things much easier
+karma to you! :)

Title: Re: U13 seats into U12
Post by: icebreaker on Dec 10, 2006, 02:08PM

found that the rears require a bit of modding to fit and the fronts don't fit at all..I did a search but the post regarding fitting u13 attesa seats into a corsair had dissapeared..since i have given my old seats away already do I need to go get seat rails to make them fit? provisding I can take them off??

Title: Re: U13 seats into U12
Post by: icebreaker on Dec 13, 2006, 10:49AM

what a job, I didn't do it myself although I tried very much.
the rails arent interchangable at all.
I now have the fronts/rear seats fitted.
need a engineer to do it but it made a big difference haveing the u13 bluebird seat brackets and the rear seat clips..