Author Topic: Pintara tape deck removal  (Read 1366 times)

0 Members and 1 Guest are viewing this topic.

Offline Gus58

  • antrx.com newbie with pewbies
  • *
  • Posts: 7
  • Karma: +0/-0
Pintara tape deck removal
« on: Jul 28, 2008, 05:57PM »
I'm going to install a new system for my son in his 91 pintara and need to know how to get the old standard tape deck out without breaking anything. I've removed the 2 plastic side trims and had a couple of screwdrivers down the side of the tape deck but don't want to continue until i know exactly what I'm up against.         
           Gus.

Offline JelloBello

  • Attesa Driver
  • west oz local moderator
  • post whore
  • *****
  • Posts: 2158
  • Karma: +29/-4
  • Gender: Male
  • Got Pastie?
Re: Pintara tape deck removal
« Reply #1 on: Jul 28, 2008, 08:58PM »
the deck is mounted to a metal bracket.

You need to remove the trim surrounding the tape deck. From memory the screws are:

2 in the ash tray (need to remove ash tray to see them)
2 just above the deck
and 2 to the left of the steering wheel column (screws into the underside)

once that bits off there are 4 screws holding the bracket in place.

this is the trim you need to remove(can see all the holes for the screws in this pic): http://img101.imageshack.us/my.php?image=dsc000313du.jpg
1994 u13 SSS Attesa ftw. Project thread here
13.876 @ 98.83mph

Offline Gus58

  • antrx.com newbie with pewbies
  • *
  • Posts: 7
  • Karma: +0/-0
Re: Pintara tape deck removal
« Reply #2 on: Jul 28, 2008, 09:38PM »
Thanks mate, have some of em out already, thought I'd better check though, cheers.