[ antrx.com ]
general => the n00bs faqs & safety zone => Topic started by: noss on Jun 30, 2005, 11:46AM
-
If you've recently joined antrx.com, use this area as a 'safe zone' to say 'hi' and tell others a bit about yourself. Much better than starting a new thread.
Enjoy your stay
-
just to add to my original bit of post.. when you introduce yourself, tell us a little about yourself, what car you drive and what you've done to it.
and current antrx'ers.. this is a flame free zone
-
hey all, names jason drive a 91 trx and live in chaddy,
i do engineering at monash caulfield, 1st year...
mods to car: jvc sound system, blue parkers and a big fuk off decal sayin "lowrider" on the rear window
no flames zone apparently so :P
-
welcome, and enjoy the site chief
-
Hey I'm jarrad Aka Waldo i am 17yrs old
i live in Perth Western Australia i drive a white Pintara ExecutIve 92, and ive have it for about.... umm 2 months
everything is still stock planning to do a few things to my car in the future, and hopefully i can post sum pics of before and after of my car wen i get mods done.
well this site is awsome I'm glad to be apart of it
cheers
.:Waldo:.
-
My names Colin, 18, about to finish VCE. Live in Bendigo, regional VIC.
Drive a 1991 Pintara GLi, Its got a Responce sound system in it, got 16" Strada rims on it, and just an alarm/remote centrol locking kit.
Nothing special but it gets me round.
-
hey colin & waldo.. welcome to antrx :)
-
whats up im chris. im from the united states and i drive an 88 nissan stanza gxe. it has a ca20e with a pod filter, exhaust, and a 10" sub w/300 watt amp. im lookin into a cam and chip upgrade or a ca18et swap.
-
Hi, my name is Nathan, i am driving my girlfriends 91 TRX and workin on it for her, i personally drive a R31 skyline.. nice forum setup guys
-
Just wanted to say hi, have a u12 Pinny which will be for sale soon ... nice setup you guys have here ...
-
Welcome all new people :)
-
Gidday
I drive a 88 U12 Attesa (Manual) and live in Northland NZ
Its done 179,000 on the clock with a reco'd engine & turbo
Mods that have been done
- Low King Springs
- Custom made shocks (by Mag & Turbo)
- K & N Filter
- Big Calsonic Radiator
- Bonnet scoop for T/M intercooler which will hopefully soon be replaced
Heres a pic
(http://memimage.cardomain.net/member_images/7/web/2083000-2083999/2083899_15.jpg)
-
Welcome NimrodNZ
Nice looking U12.
Interesting looking front lip.
-
welcome to the club, and check out the import section of the U12 tech
-
Hey fellers.. and ladies..?
i just became a member of amtrx .. n its awesome here .. i joind cause i found it on google searchin trx's cause i own 1 now .. im 16 n i bought it with the 3300 i had in my bank .. thats what the car cost me .. its a white nissan pintara tr.x 1990 model .. im very happy with it .. the only thing slightly wrong is my timing chain needs renewing .. it is making a bad noise .. so far i have done some minior mods i have a big cannon type muffler to go on.. its a 6 inch cannon with a 4 inch outlet.. all stainless .. i got it for 70 bucks from autobarn ... good deal hey... it cost 140 i got em down haha.. and i also got a pod filter on my intake ... it was hard to put on at fitst as u still need the air control setup piece but i have managed to get it on and working .. SOUNDS WIKID!!! it sounds so much beter now and with the cannon on i will have the sweetest car in town. my car had a set of extractors on it and tints when i bought it so that doesnt need doing .. lol and the pod .. i picked it up for 10 buks of a mate.. mates rates r awesome haha .. i have stock mags on it with the front right missing a tr.x humcap .. if any 1 can help me put here with a spare maybe .. leave a post plz .. well happy to be on the site here n yeh shes done 170 000 kilometers and im 3rd owner of the car .. lol cant wait for my l's hahah. peace.
-
good to have you here Trx. Seems your super keen which is always great. Like you I too joined after searching on google, found it a bit wierd getting used to how the site works, but we're all pretty friendly on here, and the site has been improved since then. Enjoy! ;)
-
Yes.. good to be on the team i guess lol ... only 2 more months till i get my p's so it shal b good.. i have done some minor modifications to my car pretty much just " wank factor" u get me ? as in the shit all young lads do .. lol the old parts work fine but get rid of em to make it bigger n better :-) .. i purchased a 4inch cannon for it all stainless shes real nice i will have it fitted soon and i got a pod filter of a friend for 10 buks .. it makes it sound real awesome so i cant wait to get the cannon on .. ill have the hottest ride in town
-
.. aww yeh and also .. when i fitted the pod i took off the air box and put it on the end of the rubber hose .. it wouldnt work the car just splutted and would stall.. i run the car with the componets of the air box pluged in. and found that the black .. air flow meter ??? whatever it is.. it would work with that connected ,,, so i have the alloy fitting there with the pod on the other side of that.. if you know hot to avoide that may u tell me here... and what does the other fitting do if you know.. it has a small plug attacthment into the side of the airbox.. it appears as some sortof sensor or tempeture device .. i am unsure can u help me out.. and also.. about the antrx chip.. i havent been able to find enough about them .. i am an electritian .. well.... on my way there and i will be able to fit this chip but can u tell me were it goes on your car and were i can read more about them... thats about it fellers... lol help me if you can thanks.
-
Welcome to this lovely site where you will be greated with arms wide open.
Ok so im gonna have to be the asshole now.
We have a little thing called the (http://www.antrx.com/smf/Themes/blue/images/english/search.gif) button. You will find everything that will answer your questions here.
Make it you're friend. If then cant find anything light up a new thread and see how that goes.
;D
-
hey everyone...
im 17 and just moved to adelaide. don't have a ride as yet but looking at this sweet 1990 Pintara, stocker but yeh. hope to get involved in cruises and stuff with other SA members maybe next year when i get my P's.
thanks guys
-
hi my my name is Johnny im 20
work at coles 2 became a manger
I Drive A nissan Pintara TRX 1990
-
Welcome guys.
This is a great site, enjoy it ;)
-
hey guys
im caitlin
im 18 and from brisbane i drive a 2001 holden astra coupe shes metalic violet
and some a-hole just recently keyed and slashed her tyre her when alister drove her to uni, some at some stage i was hoping to heve her resprayed maybe the same colour as its pretty rare for holdens or holdens hot house green for som thing different. but it may end up being one of those thing u want but never pay the 6 k to do.
-
Take it you're Alisters friend/gf??
Welcome aboard, shame someone keyed you're car tho. Bastards!!!
-
you have no idea how shitted i was because shes perfect besides that, and to then slash ur tyre thats just rude.
yeah im alisters fiancee but dont hold that against me
-
hi guys, my names markim 24 and live in melbourne. i drive a 1990 red trx. had it for about 3 years now, mods are lowered springs and a 2 1/2 inch exhaust.
i have never posted on forums before so bear with me if i stuff up,(took me 5 mins to find out how to repy)
great site and some of the cars here look awesome.
can anyone tell me how to put on pictures?
-
Hi, welcome to the site.
To post pictures, upload them to a web server (if you want a free picture-hosting service, go to http://www.imageshack.us.)
Then take the direct link to the picture, click the (http://www.antrx.com/smf/Themes/blue/images/bbc/img.gif) button and put the link between the img tags.
-
ahh ok i wondered why it wouldnt work before as well.
thanx :)
-
Welcome to antrx guys and girls :)
-
Hi, im Joel, from Tas, i found this site through a link on www.martybugs.net/Pintara/ - its a u12 pintara website. i have a 1990 u12 pintara ti with a 2" sports exhaust and a ss tip. sounds cool. has done 254520kms and is manual. This is an awesome website:P glad i found it:D
-
Where abouts in Tassie are you Joel?
-
hey Tas, im from Burnie.. You in tas too, or that your name/nick?
-
I'm in hobart 8)
-
Hi im Shannan, live on the gold coast & work in brissy.have owned my corsair for ages.2nd owner. This site is ace, wish it was going when i first got the car. I am a screenprinter. I have various mods, heres a few. fulcrum custom springs @ front, kings on back, gabriel performance shocks, avanti alloys(federal ss 535). Alpine deck,alpine 6" splits up front & 2 way 6x9 rockfords @ rear(to compensate for no sub) & an alpine 6x stacker. k&n hi flow pad (not pod)filter with a/c ducting for the cai. 2.5 exhaust (mercury resinator & exhaust) lukey extractors. Autotechnica steering wheel, bonnet clips and sunroof. i am keen to invest in a stage 2 chip! !
-
Quite an impressive list mate....welcome to antrx and enjoy!
-
Welcome to the site pedro666 im in the same situation as you living on the Gold Coast and working in Brisbane. Hope to see you out and about sometime...theres a dinner on this weekend if your interested? Just look in the queensland section in the thread about boobs...but dont believe it cause its a ly, theres not really boobs. :P
Where abouts do you work? Im in newstead but also spend a fair bit of time on the road.
Kranzy
-
newstead !! i work in woolengabba.
-
Hi guys, my name is richard (Dic) live in hobart tas. Like the site, found it whille surfing for info on u12's.
Own a 90 model red trx ka24, 5 speed with 362000k's and original donk. besides the high ks the body and interior are not to bad.
Although it does require a bit of work, but will make a good project car for the weekends when not working on customers cars duing the week ( motor mechanic by trade). Hey noss?, like the stickers any red ones left?
Couple of other questions, thinking (more to the point need to!) put a set of coil springs in the trx, thinking of using low front and rear king springs but has anyone tried low lovells springs? and question 2, what is the antrx ecm chip like?
cheers, Dic
;D
-
welcome welcome.
another tassie member, growing quickly now!! dont know bout the springs but the chips are of very high quality. check out the for sale section in the antrx.com shop, all the info is there for you
-
Hey Richard, welcome to antrx :)
-
Hi guys ( Getting Less Crazy & Tas), thanks for the welcome, still trying to get use to the layout. So are you both Tassie boys
then? if so it's nice to know there are pintara rev friends around. Thanks for the info on antrx.com shop.
Cheers, dic
;D
-
Im in Hobart (eastern shore), crazy is in victoria,
have a look at the victorian and taswegian roll call here... http://www.antrx.com/smf/index.php?topic=2462.60
-
Hey guys, my name's Jamie.... i'm 17 and i just got a Auto 91' U12 Pintara Exectutive **SUPERHATCH** hand-me-down from ma dad ;D
He smashed it up about 2 years ago in a 5 car pile up and my good friends at SGIO paid for an engine rebuild (CA20E) and new front/rear body... it's very nice. Odomiter(spelling???) stopped working at 185k (The little gear has gone in it, like in a tech article on this site... currently looking for a replacement).
This site has really inspired me... i think i've caught the bug and i havn't even done anything yet :P should be fun.
Oh and i hail from Perth :)
-
Welcome JelloBello! Yeh this site does give you the bug, I have it majorly but mine's pretty close to stock! Hope you enjoy mate! ;D
-
Hi Tas, i live in the eastern shore as well, so what type of nissan do you drive (colour, mods, etc).
Might see ya around. ;D
-
Hi JelloBello, sounds like you have picked yourself up a good deal from the oldman.
I'm like you, caught the bug and haven't been a member for long either.
;D
-
Hello. I'm David. Live in Melbourne. I recently bought a 1990 ford Corsair GL (Red, 2 litre) and want to learn a bit about DIY upgrades and repairs. Before this car I lived in Japan and drove a 1991 Nissan Bluebird (white 1.8 litre auto) which somone gave me (Free!!). It was a brilliant car to drive and thats why I bought the corsair when I got back to Australia. Was very happy with it for the first 3 monthes, then it started losiong coolant. I can't find any leaks and today I noticed some white smoke in the exhaust. I guess I'll be up for a new head gasket at least... there goes my budget for upgrades...(-_;) I wonder if anyone has any advise about how to fix it myself...?
-
There's actually a tech article on replacing your head gasket in the tech article submission board, it's a sub-board of the FAQ's section.
Welcome to the site :)
-
hey all. my names Megan 21 and i live half way between central coast and newcastle in NSW.
i drive a ford corsair and i have had it for about 2 months and bought it for $400.
I love my car and am hoping to do it up over the near future.
i have put a Panasonic mp3 player in it an have 2 12"subs with 1200watts but still waiting to find a good amp to support them.
I'm happy i have found this site its heaps helpful.
hopefully ill have some more news soon.
thanks Meg.
-
hey all. my names Megan 21 and i live half way between central coast and newcastle in NSW.
i drive a ford corsair and i have had it for about 2 months and bought it for $400.
I love my car and am hoping to do it up over the near future.
i have put a Panasonic mp3 player in it an have 2 12"subs with 1200watts but still waiting to find a good amp to support them.
I'm happy i have found this site its heaps helpful.
hopefully ill have some more news soon.
thanks Meg.
hey megan welcome to antrx.. hope you enjoy your stay.. there are some clowns here that claim to know about stereos.. they might be able to suggest something to power your subs..
-
hey megan welcome to antrx.. hope you enjoy your stay.. there are some clowns here that claim to know about stereos.. they might be able to suggest something to power your subs..
yeah sounds alot like some of my friends they think they know alot but sometimes they're wrong! i like any opinion i can get.
-
he's right, we are a bunch of clown's, but noss is an assclown...
anyway, if your on a budget i recommend Response amps by Jay-Car...
if not the Coustic or JL Audio...
Anyway megan, welcome to wierd world of antrx...
also it may pay to start a thread in the n00b zone and introduce yourself officially with some pics of your ride etc etc....
-
yeah sounds alot like some of my friends they think they know alot but sometimes they're wrong! i like any opinion i can get.
ah yeh, these guys know what they're talking about.. i just think they're clowns.. :P
-
if not the Coustic or JL Audio...
Nah, MTX, Sony, Pioneer and Kenwood are the shiznit, just ask SSStick :P
Oh and welcome Megan :)
-
hi my name is nathan im 16 years,i live in toowoomba Qld, i own a 1992 nissan pintara lsp edition, ive owned it for nearly 2 years, its still stock but should be doin it up soon.
-
hi my name is nathan im 16 years,i live in toowoomba Qld, i own a 1992 nissan pintara lsp edition, ive owned it for nearly 2 years, its still stock but should be doin it up soon.
Welcome, can you explain to me what lsp edition is though.
-
hey megan! wilcommen to this funky site. if u start to hang round here long enuf, u'll find urself spending more and more into ur broom-broom....not that that's a bad thing! oh yeah i'd HIGHLY recommend gettin JL Audio stuff - it kicks ass! (apart from the fact that i'm probably uber bias coz me all me speakers and amp r JL! :P )
hey nathan! wilcommen to u too! "lsp edition" eh? is this much different to the "normal" T/Ti/TRX variants? interesting....
-
maybe he means he has a model with LSD.. so a ti or a trx?
-
nah, it had lsp edition or something like that on the side i cant remember im tryin to find an old photo of my car to make sure cause i pulled all the stickers of the side. ill let u know as soon as i find the photo. i think its just a gli with that sticker on the side to make it look special or something.
-
From the picture there it looks like it's a CA20 powered car, the steering wheel only has 2 spokes.
-
i have no idea wot it is powered by.
-
yup its a CA20E...
-
ok kool now i know wot it is. would je20 fitin it or better of to keep this one
-
you would be better off putting a CA18DET in there...
-
is the ca20e a 2L and ca18det 1.8L
-
yup, but the det on the end of CA18DET means, D = Double Overhead Cam, E = Elctronic Fuel Injection and T = *drum roll* Turbo ;D
-
Yeah but the CA18DET has better goodies with it, like twin cams and a turbo :D
Is the JE20 a honda engine? Honda engines face the opposite way in the engine bay and as such would cost megabucks to fit into the U12 chassis.
-
ok kool just my car is a 2.4L so wot it would it be a ca20e still or wot
-
i always thought the je20 woz a silvia motor
-
hrm... i only judged your car being a CA20E from your avatar...
if its a 2.4L, then its a KA24E... nice motor (i got one ;D), if your after a turbo upgrade, you can either custom turbo it, or chuck in an SR20DET...
*also, i thought a je20 was a subaru motor...*
-
ok kool i wont be doin any real angine mods yet just body and interior for know, i dunno ne more its all confusin all i know is u can put one in ur car and thats bout it.
-
OK, if that's your car in your avatar, both of the pics have pointed to it being a CA20. First the 2-spoke steering wheel and then the (quite clearly) CA20 in your current avatar. GLi and Executive Pintaras came with the CA20E, so did GL Corsairs. All other Pintaras and Corsairs had KA24E engines. Check your car and if it has 8 spark plugs it's a CA20.
JE20 are a Honda motor found in Integras. EJ20 are a Subaru motor found in Imprezas.
Neither will fit easily into the U12, the JE20 because it faces the opposite way (pulleys on the passenger side) and the EJ20 because it's oriented north/south instead of east/west (90 degrees to the original Pintara engine)
-
yea they musta had conversion kits on em or somethin.. it is a ca20e just red my compliance plates, someone told me it woz a 2.4 so soz my mistake..
-
nope... no conversion kits...
theres something you should know, there arnt terribly many 'kits' and 'bolt on' parts for the U12...
-
ok kool ill remember that
-
Hello! My name's Miki. I'm currently 15, living in Canada and have a hand-me-down 91 Stanza.
-
Bastard, your the 2nd person to steal my "youngest on forums" kid :P
-
Don't mind chr1S, he just misses being the spoilt 'little brother' of antrx :P
-
rofl..half true :P
Sorry i forgot to welcome you mate.. :)
-
Hi all, my names Ramon, aka Ray.
Found out about this forum a while ago but never knew what it was all about, so decided to check it out and here i am.
Im 20, and from Narre Warren, Vic. Im also a member of MCCR, PGA and Ozcruise. I drive a Silver
'98 N15 pulsar SSS and its about to have a det conversion done on it in the next few months.
The current mods on the car are:
Full exhaust system, from extractors back.
Pod air filter.
17" ROH adrenalin wheels.
Pioneer h/u with sony xplod 1200w subwoofer & sony xxplod 6x9s running off a cadence amp
Veilside style front bar, Suborn Sideskirts & rear bar.
Lowered on Pedders sports ryders.
And i think thats about it.
Look forward to learning alot from you guys.
Cheers,
Ray.
-
Sounds nice mate cant wait to see some pics
-
If you've recently joined antrx.com, use this area as a 'safe zone' to say 'hi' and tell others a bit about yourself. Much better than starting a new thread.
Enjoy your stay
;D
Hi all,
My name is Kevin (Big Kev)
I have just purchased a 91 mod 5 speed pintara hatch in showroom condition for my son's first car
(or so he thinks) and was looking for some genral info when i stumbled on this site.
Let me just say firstly thanks for making new comers feel welcome and secondly what a fantastic site
i am a 40 year old Mechanic and Auto Elec although i haven"t worked on the tools for a while due to service managerial positions, however now i guess i will be back into it as i have 3 boys 17,14 and 12.
this Pintara being my eldest son's car so i have a few services and repairs ahead of me.
Anyway look forward to enjoying the site and getting some good info
Regards
Big Kev
-
G'day Kev,
Welcome to antrx :)
-
welcome aboard Kev. :)
Your cleaning products must really work to be able to bring you back from the dead!!
-
velcome velcome all
i am gonna suck your blood!!! haha
-
wilcommen ray! does everyone love u? (ie: from TV show, "everybody loves raymond" :P ) - hehe, so lame! ;D
and wilcommen big kev! maybe by the time ur 12 y.o. son is old enuf to drive and looking for a schmicko pinny, u wanna buy me trx off me? :P ;)
-
Hi all,
Im Andrew,22 y.o. just moved to Melb. from Hobart, Tasmania.
Im a Civil/Structural Draftsman
Im buying a 89 Ti pintara, looks great drives beautifully, a bit laggy down low, but i think its fixable!!
Burgundy with silver/grey bumpers
I pick it up tomorrow! CANT WAIT...
I used to be on fastmagna.com cos i used to drive magnas. they like to blow up, regularly....
Anyone live near Croydon? Any cruises on in eastern suburbs?
I know nothing about the KE24E so any suggestions for first things to do? BRING IT ON....
Anyways stay safe ....
Andrew aka MAG86
-
Welcome Andrew...
we have a fair few engineer's/draftspeople here at antrx (myself being one)...
Congratulations on your new pickup (i always think we could do with more Ti's here - from memory, there are about 2-3 active Ti members, again, me being one ;D)
there are members from all over the place, so im sure there will be someone close by, look forward to meeting you on the next cruise..
when you pick your car up, be sure to post some pics up
-
Hey mate,
Welcome to the forums, and well done on the pick up of a Ti. :) Since your from croydon, there's one in NSW but im assuming your from melbourne, been sure to check out the Victorian local chatter forums found here:
http://www.antrx.com/smf/index.php?board=9.0
As to modding your Ti, The engine is actually a KA24E :). There is also a list of "Recommended" by experiance people about what to undergo on your car depending how far you want to go, also found here:
http://www.antrx.com/smf/index.php?board=20;action=display;threadid=1373;start=0#msg13581
For a more detailed one check here:
http://www.antrx.com/smf/index.php?topic=2296.0
Hope they are of good help to you for now, and remember always use the search bar before making new threads in future, you will be very much respected if you do so ;D
Enjoy ~
-
G'day my name's Pete (aka dJP), 25 and I live in Bentleigh, Melbourne.
I bought a '91 Pintara Ti in 2003 which had a TRX Bodykit on it and a few other custom mods. To most of my mates' confusion I'm obsessed with my baby and I'm now on the road to making her a keeper. I've got some big plans over the next year or so to do lots of work to both the engine and the interior.
I'm the Senior Applications Developer at a Print Management company in Port Melbourne and I'm an Amateur Producer / dJ in my Spare Time.
I'm Stoked that I found antrx and hope to be a useful addition to the family!
-
I bought a '91 Pintara Ti in 2003 which had a TRX Bodykit on it and a few other custom mods.
SWEET!!! ANOTHER TI!! ;D ;D ;D ;D
as i said earlier, welcome aboard... as for it being a Ti with a TR.X kit, i know of only two in exsitance so, its either a two tone silver one, or a light blue over grey one (which i only found out about recently)...
would be great to see some pictures, and look forward to cruising with you (once i get my licence back :-\)
-
I'm Stoked that I found antrx and hope to be a useful addition to the family!
Welcome dJP... stay away from Jecks though. I think he already wants to have your babies... either that, or needs another sucker to taxi him around everywhere! :P :D
There will be more of the world famous ANTRX Melb cruises happening soon. We shit on the other states. Literally...
-
We shit on the other states. Literally...
Yea yeah.. you know nsw has it all ! ::)
-
Hi everyone - my real name is lachlan. I'm current'y driving my second 1987 Pintara GX to and from Albury/Sydney trip, and halfway through my P's. Love the car. I blew the head gasket of the first sedan model and bought a wagon gx that absolutely sh#tted on the sedan.
$450 inc. rego got me a wagon with 103,000k's and very minor rear bumper damage (granny car).
Unfortunately since then my dad and i have both managed to damage the poor car so one panel is slightly more factory than the others.
My pride and joy $3500 Kenwood sound system was stolen a month or so ago and i've just replaced it with a very cheap $750 Boss system. MP3 - 70+100+150+(200sub)RMS. Having fun painting it at the moment. It's named Pandora (written down the side in a basic stencil.
So yah, got class now!
see yall
-
welcome aboard, hope you enjoy antrx.
-
welcome aboard mate... we have a pretty extensive R31 section, so if you need help drop by and take a snoop around...
-
another new one, im dan. got a '90 pintara, i plan to do some stuff to it, small engine mods, maybe make the suspension a little better, fix my dead roof liner.
u will probably see my at events organised here (if i dont have to work) and im keen to have a dyno day.
-
we have a fair few engineer's/draftspeople here at antrx (myself being one)...
me too whee! ;D
oh and welcome everyone i havent yet welcomed or didnt specifically welcome already ::)
-
hey all my name is tom and i recently inherited a '91 pintara executive hatch, so no complaints seeing as it was free, lol
im 19 and a 2nd year chemistry student and know little to nothing about cars apart from the basics of how to drive one :P
im planning to ask a lot of dumb questions, lol
-
Welcome tom :)
im planning to ask a lot of dumb questions, lol
If you search for an answer to your question and can't find one, then they aren't dumb questions ;)
-
i recently inherited a '91 pintara executive hatch
Go the SUPERHATCH :D
-
Welcome Tom!
From which corner of this fine country do you hail? ;D
-
hi my name is also tom i live in goolwa s.a i found this site on google a long time ago and tried to sighn up but didnt work ??? any way i tried again and here i am
i own a pintara t only paid $2000 for it and it has only 70000kms on the clock thinking of putting the de head on it ........... 8)
-
wow only 70,000 kms ....... it must've spent most of it's life in a garage somewhere
-
hi i'm new. I drive a 1992 honda civic cx with a jdm d15b vtec swap s20 trans. blah blah this isn't a honda fourm.
I'm interested in learning more about u13's my first car was a b13 sentra.
Kent - 21 - usa
-
welcome kent.. check out the u13 section of the forums, there is loads of information on the u13 here.
-
Hi I'm Nick, 19, from Goulburn NSW
I drive a silver ca20 powered '90 Corsair GL. I recently bought it with:
(I think) 2.5" cat back exhaust,
extractors.
autotechnica steering wheel
racing seats.
$800 sony headunit (dunno which one it didn't come with a manual, but its flippy and whatnot) and pioneer speakers. no subs at the moment.
I got it all up for a grand with 222000 k's on it and brand new tyres.
the previous owner gave it a bit of a thrashing and it blows a little smoke when it starts up, but it goes away when the engine is nice and warm. I'm changing the valve stem seals in the coming week (picked a full set up for $26) so that problem (hopefully) goes away soon. I'm really hoping its not the valve guides as well :S wish me luck.
I also plan to maybe put a higher flow air filter on at some point and maybe some 16" wheels.
oh yeah, I really know nothing about cars compared to most of you guys. so any suggestions/hints would be grateful.
i'll probably take some photo's and put them up here at some point. heck, I might even put a 'how to' for changing your valve stem seals.. though I've never actually seen under the cover of a ca20...
-
congrats on the pickup... 1k for a car sounds good, (although im not too sure about the engine though, kinda depends on the condition...)
we have an extensive U12 section, so search away
-
Welcome champ!
Search button is your friend!
-
From what you've said the $1000 sounds very well spent!
Oh and welcome :)
Sounds like you're jumping in the deep end with changing your stem seals but getting in and doing things the best way to learn! Have fun with it mate and if you have any problems with it don't hesitate to ask.
-
thanks guys and or girls. I searched and found a helpful guide to changing your head which saved me from pulling open my engine just to see how it all goes. The job shouldn't be too hard, just need the right tools. If I ever muck up I've got my engineer of a father to save me ;)
-
I've heard of people feeding rope into the cylinder to hold a valve up when changing valve springs before. It might be something to keep in mind if you don't want to remove the head.
-
um... that sounds a little dodgy... but I guess when you don't have the tools you have to make do with what you have.
what I'm going to do, is I'm going to get an old spark plug and drill that out. then connect the air compressor to that. I had to do the same with my old Toyota Corona...
its also what the FSM (god bless whoever put that online here) says to do.
(I should make a whole thread dedicated to my car I think... so I don't clog up this thread)
-
Didn't really want to spam this thread, so there's another with a picture. .. the only one I have unfortunately.
I have a Nissan Gazelle, CA20E powered, S12 model (as opposed to import-only S11's or later leopard-based stuff).
Lots of kays, lots of little problems. At the moment I'm desperate for a new motor and box! Problems somewhere down there that will cost more to fix than the money required for a generic old CA20E and box...
-
Hello all.
Name is Steve, I've just bought a manual 91 Pintara T Superhatch, red, fairly high k's, but mechanically still in very good nick.
I used to own a TRX about 6 years ago, and due to circumstances beyond my control, I was forced to sell it. I've been wanting another Pintara since then, and I finally have one again. :)
Just got back from my first decent drive in the new one and now remember vividly why I have wanted one again.
They really are a very good car to drive, comfortable, well equipped, but I'm probably preaching to the converted here, huh?
I have for the last couple of years been driving an EB Falcon, which at this point is quite heavily modified, but decided with the increasing cost of fuel and my changing driving habits, that another 4-pot was the way to go.
Still got the Falcon, will be continuing to modify it, but will use the Pintara as a daily.
Which isn't to say it won't also be modified. Lowering and exhaust will be done in the next couple of weeks, along with car audio. Central locking and cruise control won't be long after, and from there, well, we will see. :)
Already got a great deal of info off the forums, have in fact been reading them for some time, it is a brilliant resource, already had a lot of my questions answered.
I look forward to participating more!
-
Welcome :)
-
Guess i'd better post as a noob :P
Joined like a week or so ago, have been cruising with you guys for like 4 months..
I think i've been on about 3 so far? plus caught up with more people at jono's party etc.
Next cruise i'll be taking my 1500kg boat of a toyota for a run, should be good.
Brenden
PS. Jono, no noob jokes, i know where you live, work and hang out :P
-
What's with all these noobs joining with non-Nissan cars? :P ;D
-
What's with all these noobs joining with non-Nissan cars? :P ;D
Yeah i know what you mean >:( unless they have a nissan engine tee hee hee
-
Ian here. Been lurking for a while and this is my very 1st post, haha.
Got a 92 red U12 with a CA motor (AT) with some 16" shoes. Everything's pretty much stock (well almost) I guess except for the driver :P
Some mods though:
RS Jasma muff
421 extractors (custom)
2.25" pipes
Pod WAI filter
Pioneer DEH3650MP
Blaupunkt seps and speakers (nothing loud)
The car's been with the fam since 92 but I've been using it for 4 yrs now. And I'm mostly a DIY guy (except for some big repairs where I kinda need to haul it off to a shop). Learned a lot of things bout this baby from here (and from another Nissan site from where I live - manila). Hope I'm welcome! :)
Here are some pics: (Will post more as soon as i've time off from work)
http://www.cardomain.com/ride/814546 (http://www.cardomain.com/ride/814546)
-
wow mate, thats a very clean car.. my brother commented that it looks like its in a show room! very impressed.
welcome aboard and we hope to see you around more in the future.
-
Thanks man!
-
Thats what all red/maroon cars should look like :)
Its a 'bad' colour on older cars most of the time, but when its been looked after it can looks fantastic!
-
Hi - new member in Brisbane. Driving a 94 manual Atessa Bluebird in that Nissan grey/black colour. Car is just as Mr. Nissan intended it with addition of 3 in. exhaust which helps. Great to see active discussion around the forgotten Atessas.
PS: Also like the spell checker
Cheers
-
Hi, my name is thomas, i have a 89 u12 stanza, 120k miles
its blue
black hood,
it recently suffered from hit and run that was really big mess
sigh...
im still in the process of fixing the whole front end, i have the cash, but im debating whether if its worth fixing it or not.
yeah ive been at antrx for a whiel but never posted, im from teamnse.
ive been there since long time
im vietnamese, and i live in california.
hmm what else should i say.
thanks for any help
-
Gday all,
My name is John, however people call me Teddy - long story. I still drive my first ever car - A '95 Bluebird SSS. I bought it 5 years ago at 100k and have driven it another 100k - in the meantime chucking in extractors and exhaust to squeeze out another 20 horsies. Put in King springs which is probably the best thing you can do for Bluey - Makes them beautiful to drive. I think they are still one of the best cars you can get, but regrettably i am selling old Bluey - So i can get another one! It pretty much came down to a choice... Buy a 200sx, or buy an Attessa with low k's, throw in a stroker kit and a massive turbo and have change left over to completely redo the ex/interior. No contest really?
For anyone interested in my U13 SSS with KA24DE it is selling for 10 grand or nearest offer. You could probably find one cheaper but i doubt youll find one nicer for that price. Cyas round,
Tedman
Townsville, QLD
-
Hey, I'm Kieran mates call me Kero, i drive a u12 nissan pintara T 1991 white, its all stock as far as i know, cept for the sound system that ive put in, which isnt finished yet.
im looking around to see what mods if any i could do to my pinta and finding prices etc, about to put in an amp and sub to complete my sound for the time being, might even replace my shitty sony 6", but anyway ill be around the forums a little.
caio
-
Hey Kieran, welcome to the site.
What kinds of mods are you wanting to do to your Pinnie? If you're after performance check out the antrx shop in the for sale section of the boards, for any other mods check out the U12 section and the technical articles.
What kind of sound system have you got in your car now?
-
um because its my first car i was just planning (after reading the tech thread about mods and stuff) on pod filter, extracters and a full exhaust. my friend can hook me up with a pod for 50 dollars, but i have to save lol, and then save for the rest. as for sound i made an informed decision(badly informed with respect to my 6") i have 2 sony xplodes (6"[XS-GF1621X]) 2 kenwood 6x9s(sorry no serial for this one dad threw the box out), and a kenwood head unit (KDC-MP4029G), its really nice sound, but the xplode thats in my passenger side door makes bad noises that my audio friend says is just speaker noise, but im also planning on getting a kenwood amp and sub (i love kenwood cant believe i let the stupid sales men convince me to buy the sonys). oh and iill have more looks at the threads you suggested.
-
sounds good kero, keep us posted. is your T auto or manual?
-
manual all the way, really pushed it today, noticed a few things that ill enquire about in the appropriate thread, oh i bought it privately(used) i think im its third owner a granny had it then a small family that got bigger were before me, its got custom spotties on it, oh and i had a ding in it already, kinda embarrasing also i might tell eventually lol, but lets just say ill be looking for a new bumper(and the metal thing that its attached to[have no idea what its called]) becuase its looks bad, ah thats about all i can think of to say atm. (sorry if some of it is inappropraite)
-
dont stress its all good. least it's a manual ;D welcome to the club!
-
thanks im glad there is a club cuz i just decided that i want stick with nissan ftm cuz im very happy with my t, probly keep buy pints lol that or when i get more money do the whole engine conversion stuff
-
Hi all,
Just introducing myself, and apologising for not owning a U12 / U13 :-[
I do however own a Datsun 1600 and a Datsun 180B SSS. The reason I joined up is that I am attempting to use a KA24DE cylinder head on a Datsun 180B short motor in my 180B SSS project :o
It's possible to use the KA24E head fairly easily on the old Datsun motors by mixing and matching timing chain guides and timing covers from other model Nissan's ( specifically from a Z20 motor for those interested), and I know of a few projects "in the pipeline" using the twincam head. The main complicating factor in using the twincam head is sorting out how to mate the strange timing chain arrangement to the Datsun motor's crank sprocket ???
Anyway, enough from me ;D
-
welcome, im new also, hope you enjoy your stay and that we might see you on a cruise
-
Hey 1600dave I have seen a Z24 with a KA24E head on it with a turbo put on aswell, but 1 of the oil flow holes had to be welded up. Have fun mate, this is a great site for car enthusiests.
-
Yep, welding up one oil return hole at the back of the head is apparently all that's needed.
The complicating factor when using the single cam head on the smaller capacity Z-series motors (and L-series like i'll be doing) is the combustion chamber size of the KA24E head. On an L20B motor (2 litre out of 200B and Bluebird's), you only end up with about 7:1 compression. Barely acceptable even when turbo'd, and no good at all for normally aspirated. And I'm putting it on an L18 (only 1.8 litre) so it would be even less.
The KA24DE has a smaller combustion chamber, so that should be a better candidate.
And on looking at the head I got on the weekend, it's a fantastic design - cam acting directly on the valve with no rockers or anything, HUGE valves, narrow valve angle so its nice and compact - it looks to my eyes to be a better basic design than the SR20 head.
One completed KA24E head swap onto an L20B bottom end I've seen documented ended up producing 186kw on the dyno. Not a bad effort from a mix-n-match homemade motor based on a Datsun 200B bottom end.
-
good stuff 1600dave, always like to see someone doing something a little different. Welcome to the site!
-
hello from christchurch nz. i'm jason and i own a 1990 bluebird ltd with sr20det and will soon be 4wd manual.
car has 2.5inch exhaust, dual stage boost (7-16psi), 600/300/75 intercooler with custom alloy piping, type h turboxs blow off
valve, k&n poddy, fuel pressure reg, t28 turbo, rps muffler (5inch tip), custom catch can.
interior is stripped out and awaiting cage.
suspension has whiteline swaybars and looking at getting tein coilovers.
wheels are 5zigen fighters.
-
Dozer, good to see you've dropped round mate.
Good luck with the manual conversion (pretty easy if you have all the bits you need!). Is the cage custom, or a SSS-R cage?
-
welcome, thats quite a car, good luck with your cage post up some pics if you can.
Kero
-
hi my name is sam i am from S.A. sorry i dont have a nissan but i do certainly like them. i drive a 1982 fiat 131 superbrava (which probly means nothing to you guys) its slightly werked twin carbies and so on. hope fully it will be getting a paint soon and a few other things. hope to see you guys around might have to come on a cruize some time. see all you S.A people at the dyno day so you can all show me up :P
-
Hey mate didnt fiats have something to do with lancia, I have a mate into old renaults, peugots, fiats.
-
welcome
-
yes fiat and lancia are both Italian. Renaults and Peugeot's are French. but all are European. i think fiat, lancia and Ferrari were all sister company's but now fiat own Ferrari but I'm not sure about lancia now its all a little confussing but yes they were sister company's back in the day
-
Lancia's use to be weapon's in the wrc with the delta, supercharged and turbocharged like the original micra.
-
Back on topic please
(If you want to continue this discussion start a thread in the general discussion section)
-
hey everyone, My names Wezza and im from the Eastern Suburbs of Melbourne. Recently brought a 91' TRX and thats how i got here. Really enjoying the site and people with the same car interests. Hope to get to know everyone.WeZz
-
Hey Guys, well i am luke i live in Inala, i just recently removed up here from Coffs harbour NSW. I have a 91 Nissan Pintara TRX, which i rescued from being crushed at the wreckers in Redcliffe. So far i have only got to the stage of getting it registered, theres still plenty to do but it all takes time. Next year i will be continuing uni doin a business degree.
See ya :P
P.S. if anybody knows where i can get the stock covers for the TRX mags, would be appreciated.
-
heya bud, welcome to Antrx. How much did the Tr-x cost from the wrecker? got any plans for the future?
-
hey man, the car only costed me 900 bucks, i just wanted to get it back to its former glory, but i did want to put a turbo onto the 2.4L engine in it.
-
My name is Cameron or chaos and for the last 3 days Ive spent 14hrs logged in at antrx, who needs sleep anyway.
I am located on the south side of Brizzy. I recently became the proud owner of a white 91' TRX . Its got 2.5" exhaust, extractors and the ka24e in the engine bay was apparently reconditioned 2 years ago -i have my doubts though. Unfortunately and hopfully someone could help me with this, the guy i bought it off managed to put a very nice dint in the front and rear bumpers. Thankfully thats the only majour work to put into the exterior. I live in Brisbane and i rang every wreckers in the yellow pages but could only find a rear bumper and at $175 it sounds a bit over priced to me...? Any suggestions on asking price for the u12 front and rear bumpers. I wanna get the body work sorted so i can start work on the engine. High flow cat and CAI are next up then hopfully a head swap to the ka24de, chip and performance cams. I have thought about this ALOT but any feedback is good.
-
Hey Cameron, welcome to the site.
The bumpers on your car aren't hard to fix, you basically have to take the plastic skin off, straighten up the metal bar behind as best you can, then put the plastic skin back on. Then leave it parked in the sun for a few days until the bumper works its way back into shape and get the paint patched up. I've done it to my front bumper a couple of times ::)
Check out the Qld section of the site, we should be organising another meet soon, you should come meet the gang!
What part of the southside are you from? I'm from daisy hill.
-
Hi there Im Daniel and im 16 years old and own a nissan pintara. was in dodgy condition when i bought it as you see in the picture (http://img142.imageshack.us/img142/6825/image000uh8.jpg)
which you can see is very dodgy and this is it now
(http://img82.imageshack.us/img82/3631/image002hn3.jpg)
*Jecks Edit: Fixed Picture Links
-
Very nice paint job there Daniel :) I love the smoothness of the bonnet!
What part of Qld are you from, and when are you due to get your licence?
-
im From Rockhampton beef captial of australia :D. I dont get my licence till June next year but when i do i should have my exhaust, custom body kit and mags all done.
-
yo i'm alan
got my car early jan this year
it a '93 nissan bluebird u13
its got a KA24de engine, it done 180km
mods: lowered springs, Sony deck, 2 amps, one for speaker and the other for my 12" pinoeer subs and HKS air filter. now saving for RIMS and retuning
-
mods: lowered springs, Sony deck, 2 amps, one for speaker and the other for my 12" pinoeer subs and HKS air filter. now saving for RIMS and retuning
Hey Alan welcome aboard matey.
Just one question, does the HKS air filter really need an amp to run it?? ;D
-
Hey everyone.
My names Luke, im 17 from Perth and have a 91' U12.
Big modifications planned soon, just trying something's out of the ordinary. ::)
Going to try a few ideas that will make it stand out quite a bit!
Thanks and hope to see some of you on a cruise someday soon ;D
Lukas.
-
Hey luke, be sure to pop into the WA local board, we've having a cruise in a week (i think) - always good to see more members from wa :)
-
we're having a cruise in a week (i think)
If I can manage to figure out a route everyone's happy with... :-\
Probably more like a few weeks. But hey, always good to get more WA members! ;D
-
hey my names Mitch im 16 and own a 1990 Nissan Pintara GLi sedan and i am in W.A anyone got any info for pintara clubs over here?
-
Hey Mitch, Welcome to antrx - i'm also from WA :)
If you scroll down a bit on the forum index you should come arcoss the local boards (link to WA: http://www.antrx.com/smf/index.php?board=13.0 (http://www.antrx.com/smf/index.php?board=13.0)) I'm pretty sure we're having a cruise this saturday and it'ld be great to see some new faces.
EDIT: wow... 2 new WA members in 3 days :D
-
yea geez, where are all the brisbaners i see driving pintaras around sheesh :P
-
i am in W.A anyone got any info for pintara clubs over here?
This seems to be the only one... :(
-
Well, another NEWBIE...
I just found this site on google while i was looking for info on pintara's and so i joined - its awesome! so anyway I'm Rhys from Brissy and i own a white 1991 Pintara T sedan, at first i wasn't to keen on it but i really think this is a pretty great car now that i have had it for around two weeks. the cars in pretty good Nick except for two random rattles and a little fadding on the paint work which was fixed with heavy duty cut and polish and a three step wax kit ;D - it shines now. I dont really plan any great mods except for things like wheels and tyres until i get the money rolling in, but at the moment its super stock with the stock rims and even stock radio :D wooooo. anyway just thought that i should introduce myself in here first to get myself out there and will hopefully be posting soon.
-
Welcome mate, I've got a Pintara T also. I was the same, not too keen on it but then i foudn this site...just wait to be inspired ;D
-
hi all just joined as im always joining new online clubs about the great Nissan. Im 16 and i just recently brought myself a 1988 NSVD Pulsar No#115/200 trying to bring it back up to stock for now but really looking for a set of Nissan Pulsar Langley taillights (the round ones) and thats really the only mod for the future (maybe a Turbo sr20 ;D) and thats all i wanted to say really
cheers
-
welcome welcome welcome matey!
-
Hey hey! My name's Simon, I'm 19. I drive a '92 U12 Pintara GLi. It's far from anything special, but when I brought it, it was in pretty good nick, with only 82,700km on the clock when I got it in Feb this year. Oh, by the way, I'm in the south-east side of Melbourne.
The front of the car has a few stone chips as well as the windshield, but the paint is in pretty good condition.
It came with with a small aftermarket muffler, JVC speakers, a green numberplate light, and some tiny 15'' 8 spoke wheels.
Since then I've put in:
- Kenwood MP3 player
- Got some gas shockers and struts (the ride is nice and firm now!)
- Put in a Tachometer
- And had the gearbox and cluth replaced.
Oh, I nearly forgot! My car produces a tiny 58.6Kw at around 5,600RPM :P ...I think.
Anyway, I'm looking forward to spending alot of time here ;D
-
Welcome 'someguy' :P
You've got yourself a reliable, fuel economical little GLi there mate :)
-
And possibly one of the most powerful monsters in the U12 range.... given the right modifications *cough cough*
;)
-
Hello everyone I'm new to dis site, I'm from Connecticut in the US, i searched high and low and think i finally found people who know what there talking about.. I have a 91 Nissan stanza U12 gutted ready for the ka24de swap and a 90 Nissan stanza u12 5 spd that has a built ka24e in from HRT performance ( soon to be turbo'd by JGY Customs). I was just wondering if anyone else has experience with these applications, Who would have some helpful information regarding parts and what i might run into.
-
Hi all, I'm new to antrx as of about 5 minutes ago.
My name's Pete, I'm 18 and i live on the eastern side of Melbourne, i drive a 94' Bluebird LX and am looking into getting some performance work done to it soon, i was referred here by a bloke with a pintara on another forum.
-
Hi all my name is ray and am currently driving a 90 2lt corsair.
My dreams of fast cars etc have fallen behind house repayments and kids so the beastie will be my boy toy outlet for the next few years.
The site is great and has already answered a lot of questions for me.Thanks.
-
Hey all long time member (at least a year) first time posting never saw the need anyways thought i would start as i have taken possession of my first nissan an N13 Exa wont be on the road for a couple of weeks though as i am waiting for a full BN style kit including bonnet, vented quarter panels, skirts, front and rear bars. It's a CA18DE however if i can find a front or 4wd DET for the right price this may also happen in the next couple of weeks. Great site you have got going here please bare with me as i learn my way around
-
hey all
im AJ and im from south carolina, usa. i drive a 92 stanza (manual) with 164k miles and its bone stock, cept for some infiniti g20 15" wheels with some nissan caps from ebay. it was my daily driver until i got a pickup, now i keep it as my weekend beater and highway play-thing. its the best car i have ever owned, and should anything happen to it i would find an exact replacement, or a jdm bluebird. my ultimate dream for this car, however unlikely and expensive, is an sr20det+awd tranny swap.
-
Well i think its official nobody looks at this thread anymore
-
I read it every now and then.
Welcome to antrx 4phuxake, ajox, oln_tired, P-unit and Joestanza ;D
-
ahahahaa... i do too, just to see who the up and comers are...
welcome guys, if you have any questions or queries that you dont want posted in a topic, dont hesitate to PM me.
And always search before posting...
-
HI my name is Daniel I recently acquired a 91 pinni TRX.
I work i IT and live in Canberra.
-
Hey all!
I'm Ellen from Qld. I have a White 1991 Corsair UA... or that's what I'm told anyway. I have to admit I know pretty much nothing about cars and I don't really need because the men in my family know everything I could possibly want to know. I'm so n00bish I don't even have my license yet. *nods* pretty sad, hey!
Well uh, yeah... my car was a cheapie but an alrighty and after a lot of my brother's hard work, it's pretty much (or completely?) roadworthy and I'm pretty happy about it. I've even got some fluffy pink seat covers for it!! (dw, they're only staying til I find something better)
Well um, yeah. Hi!! Nice to be here!
-
lol, u gotta start somewhere...
welcome to the forums :)
I've even got some fluffy pink seat covers for it!!
omfg eeedddddddddyyy ;D ;D ;D ;D
-
Hahahahahaha ill keep my mouth shut. :D ;)
But, even though she has no license, she is still smart enough to know where to post! Wooot woot!
Some advice, as already said, search, its a bastard to get working right, but it WILL find everything.
Secondly, dont grave dig. If you see the last post was made in 2004, its pretty much dead. So unless its absolutley critical... dont reply. Make a new post instead.
Hey all!
I have to admit I know pretty much nothing about cars and I don't really need because the men in my family know everything I could possibly want to know.
Theres no reason you cant learn now :D Plus, how cool would it be to upshine the men in ur family when you rock up in a ca20det engined corsair pulling 160kw atw? :P
Hehehehe
Welcome to Antrx. ;)
-
lol considering my brother has a 'dirty panda' and a bluebird in the works, I don't know if I'll ever be outshining him =P
-
welcome to the club, have fun,
oh yeah this reminds me, im lookin to have a tip over to QLD (gold coast) some time soon, so i might be in contact with you guys soon about any events goin on. anyways gtg
laters - i'm outy
-
Hi All,
My name is Tania and I live in Brisbane. I currently don't have a car (just sold mine and looking to buy one). Previously I’ve had 3 Mazda RX7's, a green Series 1 with an extend ported 12A, a blue Series 1 with a bridge ported 13B and a Black Series 1 with a 13B Turbo. Yeah I know, I’ve had three of the same cars, I guess I have a little bit of a soft spot for rotaries. ::)
I went on an Antrx Cruise the other day and met a few people from Brisbane, so I was convinced by a friend to join. So, uh... Hi. :)
-
Welcome Ellen and Tania!!! Haha, you were the ones driving Brendan's supra round the trolley return at Garbo...
Great to see more chicks joining up!!!
-
Hey Teena,
Yeah, She made me do it...! :P
-
I saw that post!! It was your fault!! All your fault! :P
Tania, you should buy a pintara and be cool like the rest of us... *looks around* well... .some of us...
-
Ok so it was a little bit my fault! :P
Tania, you should buy a pintara and be cool like the rest of us... *looks around* well... .some of us...
Oh and i didn't know you had a Pintara Ellen, or is it a little gender confused? :-\
-
it's so close to being a pintara it can taste the victory... but those damn ford badges just hold it back. One day it'll break free... just you wait!
-
hey im ryan
im 16 and just got my car yesterday its a 1990 nissan pintara ti, auto
im from the gold coast, palm beach
thanks
-
Hey Peeps,
Just signed up and i'm currently looker for a tidy Bluebird TRX or U13 Import.
I'm 27 and from Sydney (Inner West)
Cheers,
Dennis
-
hey all...
signed up and now i gotta tell youse sommat bout me...
im 18, name's brendan, adelaide sa and i drive (when its not at the mechanics...!) a 90 nissan pintara Ti auto... fell in love with its lines and with an exhaust sounds nuts...
alas its slow as shit...(damn auto...) yea well choice site an ill see you all on the flipside...
-
hey all im charlie, im 18 and driving a executive superhatch that ive had for about 3 months.
im just outside brisbane up in the mountains, so the driving is fun but petrol prices are a killer getting into uni every day.
-
I'm Andrew, 17. living in Perth WA. I drive a completly stock 1990 Pinni GLi, i was planning on buying a TRX but didn't have the resoures. joined so i could find out about local crusies and find out what modifications i can do on my car.
-
Welcome to antrx.com!
petrol prices are a killer getting into uni every day.
I feel your pain, thats why I use the ever reliable public transport ;D
I'm Andrew, 17. living in Perth WA. I drive a completly stock 1990 Pinni GLi, i was planning on buying a TRX but didn't have the resoures. joined so i could find out about local crusies and find out what modifications i can do on my car.
Sounds like you are at the right place mate.
hey all...
signed up and now i gotta tell youse sommat bout me...
im 18, name's brendan, adelaide sa and i drive (when its not at the mechanics...!) a 90 nissan pintara Ti auto... fell in love with its lines and with an exhaust sounds nuts...
alas its slow as shit...(damn auto...) yea well choice site an ill see you all on the flipside...
Welcome, I'm from SA also. Hopefully see you out on a cruise if we get another one going and some decent attendances...
-
I'm Andrew, 17. living in Perth WA. I drive a completly stock 1990 Pinni GLi, i was planning on buying a TRX but didn't have the resoures. joined so i could find out about local crusies and find out what modifications i can do on my car.
hey man welcome, more wa recruits *excited* please post in the WA section so we can get to know you better.
-
I'm not sure where I should be posting this q but I figured it's the noob zone so if I post it here I probably won't get too many flames...
what's this whole warning thing?
All of these really awesome people in here and other posts have a 'warned' sign under their names... what's with that? How many times can you get warned and what sort of things do you get warned for? I'm really confused!!
-
I'm not sure where I should be posting this q but I figured it's the noob zone so if I post it here I probably won't get too many flames...
what's this whole warning thing?
All of these really awesome people in here and other posts have a 'warned' sign under their names... what's with that? How many times can you get warned and what sort of things do you get warned for? I'm really confused!!
theres a running joke at the moment between some of the mods and some members...
dont stress too much, you have to do something REALLY bad to get warned and/or banned...
-
its a big joke?!?! ;D
lol yeah you dont need to worry, just search, read and think about what you say and you will be fine.
-
G'day all,
I'm Rob, 21, living either at Bacchus Marsh or Creswick, Victoria. I have a completely stock 1990 Pintara T, which hopefully, once I get some more money, won't stay that way. I have however, added a stereo and a UHF radio to mah ve-hicle ::)
Nothing else remotely exciting to add so I'll see you all on the forum. Party on dudes!!! :D
-
i figured i shouldn't have skipped posting here.... hi im rob 19 and from Tamworth NSW. i drive a 1992 Pintara GLi, Central locking, head unit, better speakers etc etc. bought it after the many hours spent cruising in a mates pinny and after my first car blew up found this one for 1000$ so bought it and am still loving it (minus the tempremental break downs)
-
Hello, My name is Alex I'm 17 and live in Bendigo. I own a 89 u12 pintara that I bought off my brother for $500. I bought the car off him just after he bought his s14 and he was in a very good mood hence the $500 however now that he has come to his senses he has realized the mistake he has made. The car currently has 17 inch wheels, Ti interior, sss grill and bumpers, lowered suspension, sports exhaust, extractors, and clarion speakers. I am currently trying to get it road worthy in time for when I turn 18.
-
Nice Alex, sounds like a good buy you got from your brother there mate! :D
-
bargain ;D
-
Been a while since i last lurked, hehehe.
Anyways, got something new for my u12:
(http://img227.imageshack.us/img227/6443/dsc01454pp3.jpg)
(http://img158.imageshack.us/img158/9862/dsc01453id1.jpg)
More here:
http://www.cardomain.com/ride/814546
:)
-
hey im matt!
im awaiting 'delivery' of my "new" '91 Corsair Ghia; right now im left to drafting ideas of future endeavours i can partake on the car! Main things so far (apart from the mechanical repairs needed to qualify for the safety cert.) are a garage respray of the bonnet and roof which are bubbling and interior relining, ive been reading about the DIY dial coluring and thatll be mad!
so yeah bye. :D
-
Welcome matt! Sure you'll find heaps of info on this site that'll help!
By the way your name H.M.S. Interceptor sounds like the name of a porno :P Just playing around ;)
-
....By the way your name H.M.S. Interceptor sounds like the name of a porno :P Just playing around ;)
what is it with u and porno lately.... :P :D
-
hi, thanks for this opportunity to start in this safe zone. even though i'm a 58 rev head ,i'm not used to "posts,threads,etc".i live on the sunshine coast,drive a tidy u13 attesa,which is being rebuilt at the moment. i love this car. i must love it. iv'e showered $$$$$$$ into it. for example, custom exhaust manifold,dump pipe,mandrel (3")exhaust.hi flowed 600 cc injectors. microtech lt8 computer,bosch external fuel pump,custom surge tank,custom air box,custom bar/plate intercooler.gt2871r 400hp rated. ppg gearbox.. mercury motorsport 4 wheel dyno showed 175kw at all wheels...then i broke it.. 4 wiseco forged pistons all cracked, no sign of detonation, not 1 bit of ringland damage.. go figure..anyway still i love it .i look forward to any discussion that this post might generate.o by the way.. i'm in dire straits for an attesa u13 standard block #78e.i would be eternally grateful for any info as to where i might track one down..thanks again,graham..
-
Hi Graham,
Welcome buddy, It's good to see a senior serious about their U13 :).
-
Welcome Graham.
Thats alot of mods on a HNU13 ;) PPG box is the clincher for me, its got the power but also the tough gearbox to hold it down.
With regards to the engine block, is that block tag '78e' differant to other east/west SR20DET's other than the GTiR? Could you use any SR block in good condition?
-
hello budgie,thanks for the welcome. unfortunately it must be only 78e block with attesa.the gearbox/transfer case are different to all the other f.w.d sr20s.regards graham
-
Hi guys, I've got a u12 Pintara GLI hatch. I like it. It is comfy, grunty for a 2 litre, economical and roomy. It also has a habit of gassing me, not giving me any idea of the engine temp, fuel level or odo reading.
However, it does praise my driving with the ECM (Extremely Competent Maneuver) light, every day.
Glad I found you.
-
However, it does praise my driving with the ECM (Extremely Competent Maneuver) light, every day.
HAHA! Gold :)
-
Thought i should finally post a pic up of my car. Still a bit of work to be done.
Hope it works.
(sorry if its a bit big)
(http://i181.photobucket.com/albums/x186/stretchclothing/edit.jpg)
(http://i181.photobucket.com/albums/x186/stretchclothing/DSC00760.jpg?t=1187779616)
-
You've got a nice mix of import U12 parts on the front end of your car stretch.
EDIT- Just looked at your photo-bucket. The back end looks like a bluebird bar and thats definitely an import rear spoiler. I realise it would have been ages ago, but ask your brother where he got those parts from.
My list for it (external looks) might look something like this...
- Remove pin-striping (fingers nails work a treat, grow one longer, use it then cut it off :P)
- Repaint SSS grille and surround
- Colour code front and rear bumpers white, leave rubbing strip black
- Tint cornering lights
- Clear front indicators
- Dark as possible window tint
- Pintara Ti chrome door handles
And maybe lowered a touch more.
-
Ha, yeah way ahead of you on the one long finger nail (long story). I had to take the lowered springs out for the road worthy and I'm respraying all the bumpers and the grille when i get some new head lights and corner lights. The whole car needs a good days work put into it.
Yeah he got them from a wreckers here in Bendigo in about 2001 and traded his old bumpers and grille for them. I will get some more details for you when he gets home.
-
Yeah he got them from a wreckers here in Bendigo in about 2001 and traded his old bumpers and grille for them. I will get some more details for you when he gets home.
What the hell is with country wreckers having import U12's!!!
There WAS one in ballarat as well, but not much left of it now.
PM me if your bro mentions any details when he gets home stretch. Cheers mate.
-
What the hell is with country wreckers having import U12's!!!
There WAS one in ballarat as well, but not much left of it now.
What? There was an import U12 in Ballarat? Where do you guys find out about these?
-
What? There was an import U12 in Ballarat? Where do you guys find out about these?
Central auto dismantlers, had been there for a while when my ex's uncle went to check it out for me.
Was an auto HNU12 I belive. Go there Fuzz, take some pics for us all and post up. There may be some stuff still left thats useful to import U12 owners... (rear sub-frame, prop shaft, etc) as I'm not sure, never saw the car with my own eyes.
-
Ooo, if that was Central Motor Wreckers (only one like it I could find in Ballarat on the internet) then I will go tomorrow! I can call past on my way home.
If it's not central motor wreckers just give me an address and I'll call around.
Cheers,
Rob
-
Hey Budge-man,
Sorry for the delay in replying. The wreckers were pretty useless, they say that they don't have any import U12's in their yard. That's what they SAY, they could actually have one out the back and not know it is there.
Cheers,
Rob
-
hey all!!
Im Alex Theris... I live in a lil hole.. called dubbo.central NSW.. its the place with the Zoo...?? anyway im 16... And im Driving a Ford Corsair Ghia 5 Speed Manual... ive got a set of 17inch chromies :P for it... my ps2 and 7'' screen will soon be in it AND I JUS GOT MY NUMBER PLATES WOOP WOOP !FASTAS!... set of extractors mild cam work and an ANTRX stage 3 chip will also be new aditions in the next few months ALSO IF ANY ONE IS SELLING A TRX BODY KIT..VERY INTERESTED :p..., previous cars... 1984 toyota Sprinter (hutchiroku) talk about loving rear wheel drifting!! haha, but i gave tht to my brother, i love my bro ahah, also owned an lj torana with a rb30 conversion... but dad sed he wanted it for big drag plans.. yadda yadda.... so he took tht lol... and my brother jus bought me this car... and THANX TO THIS SITE ive learnt heepz about these cars... these cars rock!!!
AWESUM SITE... THANX
-
Ah Dubbo, behave yourself 1 of my mates is a cop up there. Welcome to the site mate.
-
Hi all My name is Adam, I am from Cessnock I currently work as a car detailer/audio fitter, I drive a 2000 Hyundai Accent.. I have a few mods, Ss Inductions Inake/K&N Panel Filter, 4-2-1 Extractors, 2"Sports Exhaust, Whiteline Front Strut Brace/Rear Heavy Duty Swar Bar, Pedders Sports Ryder Lowered Springs.. Next on the list is getting the Ecu Tuned... I heard about the forums from Weasel he is a friend of mine and I have met Chr1s about a month back... Here is a couple pics of my car
(http://i208.photobucket.com/albums/bb104/adamhumphrey/Accent%20Pics/Accent001.jpg)
(http://i208.photobucket.com/albums/bb104/adamhumphrey/Accent%20Pics/Accent002.jpg)
Not much engine here!!
(http://i208.photobucket.com/albums/bb104/adamhumphrey/Accent%20Pics/IMG_1935.jpg)
My Boot Install a my mate from work built for me...
-
Turbo it and blast all the un-suspecting fuckers at the lights :)
-
pull that toy motor out and sr it. trx_reece had a run in with one of these running an sr a while ago against his also sr powered 910 bluey. 8)
-
bah, sif put an SR20DET into an accent.
Mitsu 4G63 for the win!
-
4g63 is definitely the way Rigoli had a 10 sec methanol burning 4g63 turbo accent... Starved for cash would love to do a conversion to a big engine...
-
Not usually keen on Hyundai's but that ones pretty neat. Welcome to the site.
-
hey hows it goin my names anthony i live in adelaide and i own a 1989 ford corsair, just bought sum 17s for it and waitin to be painted a goldy colour with a pearl (dont know what colour yet) still lookin for a trx body kit tho lol hard to come by
-
Welcome anthony. Make sure you check out the SAantrx section. We have a cruise coming up and i'd be awesome if you could come along! Also we need pics ;D
-
Anthony the one that msgd meon the net haha. Welcome mate. I LOVE the wheels on that Hyundai ::) My e-penis is bigger :P
-
Hey everyone, my names matt and in in adelaide. ive got a 91 ford corsair with a 2L in it. its in good condition generally. had it for a couple yrs now. got it for a steal and only had 96000km on it when i brought it. now has 118000km and is still going strong! bullitproof! its basically stock, but i only got off my p's a couple months ago so didnt want any more attention by the abundence of cops around adeladie (esp fri sat nites!). ive put a stereo in though, just some 6 inch sony speakers in the parcel shelf and a sony headunit. its good enough for the time being. eventually when i get the money i want to put extracters and a nice exhaust system on it as well as some nice mags...
great site and some awesome rides on here...wish i had a trx though!
cheers
-
Not usually keen on Hyundai's but that ones pretty neat. Welcome to the site.
don't encourage him thats the last thing he needs
bout time you got on here only taken you a couple of years
-
Hi. 1st post, sorry if its boring.
The names Matt. I live at Kurwongbah, Brisbane and work at Archerfield Airport as an engineer. I own 2 ca20e pintara's auto/manual ( Auto is just for parts.)
Intrests consist of cars, bikes, planes, computers, chicks.
Daily driver pintara mods...
2' exhaust, zetti cannon, hi flow cat, extractors. (sounds like it has alot more HP than reality)
CAI, Adv timing, lowered vr king springs
JVC Head unit, clarion splits, Kenwood 6x9's, 12' JL Sub , 2 amps.
Car done 124000k's when i got it. I've done another 130 000 ish k's in 4 years love the rev limiter, and it still goes good.
-
Daily driver pintara mods...
2' exhaust, zetti cannon, hi flow cat, extractors. (sounds like it has alot more HP than reality)
CAI, Adv timing, lowered vr king springs
JVC Head unit, clarion splits, Kenwood 6x9's, 12' JL Sub , 2 amps.
G'day Matt,
Welcome to the forums! You got any pics of your ride?
Sounds like you have a nice setup there. You should get one of those fandangled ANTRX chips for your CA and she'll be hammering her way through Texas. Nah, seriously, people reckon they're good. I'm gunna get one for my KA when I can spare the money.
Cheers, enjoy your stay,
Rob
-
Hiya my name is Octavio and i'm from Mexico, i own a 1991 Stanza GX Manual, just bouht it so no upgrades right now but im going to start working on him very soon, very nice page and vey helpfull, keep up the good work. :)
-
Welcome Octavio.
I'm assuming thats a KA24E powered Stanza? You will find with good servicing the KA24E will just keep on going champ :)
-
G'day folks. New member here.
My name is Adam and I recently upgraded to a new car.
A U13 1994 Nissan Bluebird. Lovely vehicle. I love it.
I'm not much of a car geek or "grease monkey" as some would call it, but I'm keen to learn and have already begun.
Glad to be a member and I think that I'll have a good time here.
P.S. I'm from Adelaide, South Australia (for those of you in Adelaide, I live in the hills).
-
Welcome Unbalanced you have come to the right place there is alot of people who know the bluebirds inside and out ;)
-
Hey Gang,
My name is Dan, I'm 31 (and balding) and I drive red '90 model TRX. I've had it about 6 years and it's been in my family since
new(Formerly known to my family as the 'gimph'). The wheel ended up in my hands (from my nana) when my HQ gts350 left me stranded on a hill in a thunder-storm. From then on the numerous V8s I've had were a thing of the past. The old girl has had a semi hard life as it lived in the bush for a while with a few near misses but now it is slowly coming back to its former glory. I've done a few mods of late Lukey Exhaust, Bose struts, Whiteline swaybars, Nolathane bushes, Kenwood system, K&N filter, replaced nearly every perishable (hoses, radiator, alternator, belts, every master/slave cylinder(cheers Skip), brakes, etc) and of course a Grex gear knob(Good for an extra 20kw ;D) I have got to say the TRX has NEVER let me down over the years hense it's getting the T.L.C it deserves.
I have been reading the forums here for a few months now and look forward to posting some pics and info over the up and coming rebuild so talk to you soon.
Cheers, Dan. Rockhampton Qld.
P,S Hope my grammer is up to scratch.
-
Haha!
Welcome Dan. They are solid little cars mate.
Enjoy the forums and good luck with your rebuild.
-
hi everyone, im 15, on my L's, live in canberra and i drive a 1991 nissan pintara trx, stock as a rock but planning some mods
-
Hi guys names Daniel, Live in Melbourne, want to get a TRX desperately so I'm scouting the classifieds daily for a car. so yeah thats me!
-
G Day
My names Nathan, live in Adelaide, 20yrs old, Uni Bum (last year!!)
I drive a 1999 A32 Maxima which ive had for just over 2 years
modifications to the car include - Tinted windows, Clarions sound system, ANZ Tazer (mirror black) 18x8 rims, debadged, DnT custom Y pipe and Catback, clear side markers, Alutech FSTB, K&N Panel filter,
and the biggest problem - suspension. currently its sitting 2.5inches lower thanks to some cut Lovell springs, i have Monroe Gt Gas at the rear and Koni Sports inserts with adjustable stiffness on the front. Coming soon will be some custom made springs to replace the cutties, some lowered bumpstops and later on koni sports in the rear
(http://img144.imageshack.us/img144/9628/dsk2bf5.th.jpg) (http://img144.imageshack.us/my.php?image=dsk2bf5.jpg)
(http://img513.imageshack.us/img513/7794/imgp2325ie1.th.jpg) (http://img513.imageshack.us/my.php?image=imgp2325ie1.jpg)
(http://www.postimage.org/Pq3RdEEJ.jpg) (http://www.postimage.org/image.php?v=Pq3RdEEJ)
ive got some more stuff to do which include, 00VI, V-AFC, WAI, Shift kit
looking forward to getting to know some of you
cheers
-
awesome, dude good to have you hear...car looks good...
-
Hey all,
We've just bought our first Pintara (GLi) and I've just stumbled upon this great site. I'm not sure of the model designation however.
Its great to be back in a Jap car, our last one was a modded Merc 190E that was rear-ended by a 4x4 with a bullbar at the lights >:( But the Merc had some really strange peculiarities like the ignition key was on the left side of the steering column...
As can be seen by my forum name, we love R32 Skylines with a passion. Unfortunately the boot isn't big enough for our double stroller, and they are ridiculously over priced here in AU compared to NZ. So we've discovered the Pintara Hatchback. The GLi seems quite basic, but its got heaps of space for the size of it. Its also the same Sky-blue as our first Skyline :D
Well, we've had it a day and I've managed to fix most of the things wrong with it that made it's asking price cheap ;D One of the benefits of a long Nissan background I guess...
-
Welcome mate :)
The first pintara in my family was a light blue super-hatch, there has been four U12's since :) Great cars.
All cars are welcome on antrx cruises as well... especailly nissans :)
-
hi people names alan im 33 just recently got my licence back ,so i went out and purchased a white 90 trx auto equiped sedan its got a few gremlins with it but by looking at this excelent site i shall be able to sort it out im a big fan of datsuns and nissans having owned a few over the years my last car was a tank commodore that was a big mistake oh what a barge any way here to say hi great site guys.
-
hi all i drive a datsun 1200 ute that has a ca20 motor out of a pintara that was installed when i bought it. it has a torana diff and drums in the rear and commodore calipers with nissan rotors on the front. other mods include brand new mazda sunlight silver paint job, black 13 inch rims, adjustible suspension in the front including ride height, camber etc. springs reset lower then blocks added because it wasn't low enough still. interior wise it's got some black sparco's and new steering wheel and gearshift nob.
edit: and i live in canberra australia.
-
hi guys
Im jake 36 years old and i live in broady,
Just picked my self up a 1991 trx silver in (auto:( and i have become so suprised with this car im hoping to get some info here or even make a few friends.My goal would be to do a manual conversion and leave engine as is i beleive its enough fun for the coeners and street.
All the best to you guys with your beasts.
-
Welcome Jake :)
-
Hey People,
My name's Dean.. I drive a '90 TRX, It got rear ended about 5 weeks ago and hopefully i will be able to get it fixed up and back on the road soon.
Modifications include: Blue respray, 2.5" exhaust, wildcat extractors, pod filter, bored out to 2.6 litre, Uni chip, shaved ported and polished head, High Flow Injectors, HD Clutch 17" Romi Thunder Chromies with new tread, Koni Adjustable Suspension, Strut Brace, Short Shifter, Retrimmed door cards and parcel tray in white vinyl, resprayed dash surround, Clarion touch screen head unit, 6" speakers in the front, 6x9s in the back, alpine type s sub, pioneer 4 ch amp, and pioneer monoblock amp.
I've only had the Trx for 6 months and was loving it, it never let me down.
Cheers Dean from Brisbane
P.S if anyone wants to sell a TRX rear bar and bonnet PM me.
-
welcome aboard mate, u'll love this site - even tho i've sold me trx and now got a subbie, i still come back here! :D ;D
ur trx sounds nice as - minus the "rear ending"; any pics?
-
Yep, there's so much useful information for our cars it's great. I'll get some pics up after it's been fixed.
-
even tho i've sold me trx and now got a subbie, i still come back here! :D ;D
Its got nothing to do with cars tho... the reason Jon comes back :P
-
Greetings all
Name:Dave
Country: Barbados
Car: U13 SR18 ARX Bluebird, Automatic
Year: 1994
I've had the car for 4years, drives like a dream. looking to change the engine, repaint etc.
Guidance on engines that would fit with minimal trouble would be great. I'd really like to know what can be done to keep the old bird running for another 10 years :)
-
hey my names anthony. i got a 89 stanza xe all stock right now but hope to gain knowledge from you guys cuz i really dont know much right now. anyway hey everyone!
-
yeah hi my name is trent 18 and i live in brisbane and drive a u13bluebird i recently have bought it of a guy in springwood which i think was or is still in this club i am a butcher by trade this car was a nice wen i got it only difference now is i put an exuast on it and some nice stainless steal extracters other then that the audio is different and that sums it up thanks guys
-
Welcome mate,
Good to see the QLD club gaining more numbers...Look forward to meeting you at a cruise or meet.
-
hi I'm just another noob here
I'm zizi from Malaysia
25, working as a clerk
driving Nissan u13 Sr20det
cheers ;D ;D
-
hey mate,
welcome to the site. ;D
Hope you like it...
Is your u13 all wheel drive??
-
Hi my names Brad i live in Tasmania i own a 1991 Nissan Pintara TRX 5sp its red and primer at the moment im fixing it up for a respray future plans are engine mods and a sports exhaust.
-
Welcome to site mate
We all love a TRX project, be sure to put thread in project section with plenty of pics
-
thnx mate enjoying the site....yea ill have to make a thread when im able to get more progress done to it.
-
Hey guys
Names Jarryd
recently got me p's may to be exact and been looking for some clubs/crusies
i drive a 1990 Nissan pintara TRX Greyish in fairly good conditions just hit 153k
i enjoy cruising and try to do it as much as possible
i hope i can come along some time
i live in cranboure and have driven to ballarat and the city. :) long drives are cool :)
anyway guys/gals :) hope to catch up on the next cruise :)
Peace U12 TRX for the win :) :)
-
welcome mate, hope you enjoy the site, and the cruises...
-
Hey Jarryd,
Welcome to the club. Don't forget to post your name in the Vic register. Hope to catch you on the next Vic cruise.. Whenever we get around to organizing it :D
Cheers.
-
hey guys im 20 my name is justin but every 1 calls me jut
im a member of r31 skyline club as i used to own a 31 skyline
but that car is now dead and gone and i now own a s12 gazelle
the s12 came with a ca20e in australia (vg30 in usa,fj20 in japan)
there are ALOT of parts that are interchangable with u12 r31 s13 u13 and even datto 720 utes and many more cars
you guys seem to know abit about your cars and i want to take advantage of that
i am a complete car nut and if it has wheels and takes all my money i love it lol
i am also full of useless information and also usefull stuff too
-
Welcome bud! S12's aren't half bad, a good mate of mine has one. Got any pics?
i am also full of useless information and also usefull stuff too
Sounds like the majority of members here ;D
-
i have alot of photos and if you are interesred im going to start my own project thread ...
-
Hi Guys, I live in Hobart, Tas and i'm Scott. Spun a bearing in my 91 GLi PINTARA and decided to go for the full big rebuild. Already totally LOVED the car so the bearing going was a good excuse to go for the rebuild. Spent nearly $8500 so far comprisiong of ITB's (individual throttle bodies), alot of head work (porting, polishing, match flowing, valves etc..), strengthened bottom end, crank polished, knife edged and balanced, boring, honing etc of the block, upgraded pistons, compression upped to 11.5:1, big cam and the list goes on! LOL About a month off from getting it tuned and back on the road after doing the bearing last Nov (start of). Starting to get itchy feet (haha). Anyway, glad to find a site with so many nissan enthusiasts and with so much info to share!! Cya all around, Scott.(evlknvl)
-
hey and welcome :) this place is very friendly :)
-
Scott, welcome. Would love to hear and learn more about your engine build, everyone loves annotated pictures!
-
Was gonna add a pic or two but... I read the "posting pics for noobs" thread but when i reply or start a thread there is no option at the bottom to do either browse/host a pic. Thought it was because I was a newly joined member and couldn't post pics yet?
-
greetings !
Hey maybe is a bit rude for me to start a thread without introducing myself in the first place. ;D.First and foremost.My name is Jonathan.Staying in Malaysia..
I`m driving U13 94 bluebird (Manual).
SR20DET(Swapped engine)
I had been browsing your sites about 3-4 years ago and didn`t find any U13 rides..But right now the number has been increasing..What a surprise..!Anyway day by day i found the sites to be very informatives in many aspect..I guess it`s time for me to fit in..Keep up the good job for keeping the site alive. ;)
cheers,
Jonathan
-
Hey,
My names Brett, yeah, user name really has nothing to do with anything at all.
I just recently bought a manual rnu12 attesa with a ca18de in it.
I have been reading topics for a while, I like to lurk.
Vithy is the one that introduced me to the site and to the car I now own (bought it off a current member)
I am located in Adelaide at the moment but in a couple months will be moving to Goulburn where my attesa and dad await.
No modifications have been made to the attesa yet, because I am nowhere near it at the moment.
I like making long introduction posts that noone really wants to read.
Cheers if you made it this far. ;)
-
haha I pretty much just moved out of goulburn.
has the Attessa been on the road yet? I'll have to keep an eye out for it when I'm visiting
-
It's out of rego at the moment, and a few repairs need to be done before I put it on the road.
It's sitting in a garage in collector as I type this.
-
Hey,
My names Brett, yeah, user name really has nothing to do with anything at all.
I just recently bought a manual rnu12 attesa with a ca18de in it.
I have been reading topics for a while, I like to lurk.
Vithy is the one that introduced me to the site and to the car I now own (bought it off a current member)
I am located in Adelaide at the moment but in a couple months will be moving to Goulburn where my attesa and dad await.
No modifications have been made to the attesa yet, because I am nowhere near it at the moment.
I like making long introduction posts that noone really wants to read.
Cheers if you made it this far. ;)
I made it that far XD
welcome to the forum
-
It's out of rego at the moment, and a few repairs need to be done before I put it on the road.
It's sitting in a garage in collector as I type this.
cool cool.
Good luck with the repairs and welcome to the site.
-
cool cool.
Good luck with the repairs and welcome to the site.
Cheers.
By the way, would you happen to know any good damage repairers/body workers in goulburn or close to?
-
My dad had some work done by some guys and he was very happy with their work.. I can't think of the place as I've never had to go there myself. I'll ask him next time I see him and let you know.
-
Cheers. ;)
-
umm well im sorta new, not really known to most of u guys so il sell myself a little
My name is Christian and i own 3 r31 skylines ,1 being a gts2 and a Stagea,
i have a huge skyline collection in the die cast form. I live in Melbournes East and i love a laugh and a can of beam
-
M8, if ya don't mind a can a beam or two ya must be alright! LIQUID GOLD
-
im back woah havent been on in like a year..
well i dont own a pintara anymore.. now its an r31 rb30et.. still alright to make a thread on it?
cheers
Lucas
-
im back woah havent been on in like a year..
well i dont own a pintara anymore.. now its an r31 rb30et.. still alright to make a thread on it?
cheers
Lucas
Welcome back! Go for it with the project car thread...I've got one for my 180sx and a rb30et sounds more exciting than mine ;D
-
hi my names chris and ive inherited my girlfriends u12 ti hatch, am having trouble finding a handbrake cable can anyone help me out
-
hey everyone....relatively new to the site...altho it has been handy already....recently bought a 1991 ford corsair sedan....in a lovely shade of light blue......fairly standard at the moment......probably going to stay fairly standard as well....just the normal minor mods.....air cleaner, exhaust, wheels and stereo.....nothing major as it has to carry my kids as well.i i have been an old datsun nut for years myself......i have owned at some stage a datsun 1200 coupe, dastun 200b, datsun 180b, and pulsar exa turbo...now the mighty corsair/pintara, (along with a few 4x4's thrown in as well)....anyhoo...i am up at woody point, just near redcliffe, and am looking forward to chatting and seeing some of the good work done to some of the cars on here!!
-
G'Day guys just thought id introduce myself my names Matt im 18 im from frankston s/e of melbourne im going for my liscence in 2 days i have a 90 U12 Pintara TRX i was fixing up a 79 porsche 924 but its in too bad condition and needs too much work to have done to it so im going to flog it off, i got my TRX new years eve the previous owner put extractors on it and lowerd it so im planning on cold air induction and other small mods to get it going and thats about it.
also i couldnt think of a username and at the time i was listning to a song called brass monkey so yeah :)
-
BRASS MONKEY!! THAT FUNKY MONKEY!!
welcome to the site, im from Carrum Downs.
If you need some help dont hesitate to PM one of the mods.
BEASTIE ROCK
-
greetings to all ANTRX members, my name is corey im 18 years old and i own a white U12 Nissan Pintara TRX (1990) with a KA24 engine.
I live in the Hole that is Adelaide.
I have owned my pinny for only about 3 months or so and got it for a bargain off of my brother for $500
Originally when i got it the Car was running perfectly. Due to me driving like a tool it now has a couple of problems that need to be resolved.
Will give more details in future posts.
I have visited this site a number of times after googling it and it has a lot of useful info. I have also read a couple forums and completely agree with the ban on the phrase "f00lly sik (yes i have a low IQ - or i'm taking the piss)"
Anyway my TRX is stock as a rock at the moment besides a nice tint job and after driving it the first time i fell in love with it, i am intending to post some photo's of it but unable to until i have shaken the "noob" tag haha.
Looking forward to meeting some of you fantatics.. Peace.
-
Welcome Corey! I've organised a cruise to Victor Harbour on the 18th of January:(http://www.antrx.com/smf/index.php/topic,16706.0.html). Feel free to come along or even come to the meet point for a chat! We seem to be gettign a few cruises organised to be sure to come along.
-
Welcome Corey! I've organised a cruise to Victor Harbour on the 18th of January:(http://www.antrx.com/smf/index.php/topic,16706.0.html). Feel free to come along or even come to the meet point for a chat! We seem to be gettign a few cruises organised to be sure to come along.
sorry mate, i'd love to! but my cars runs out of rego on the 12th and it is going off the road for a couple of months for a few engine repairs and mods. also need 4 new tires and does anyone know where i can get new white TRX centre caps for the wheels? cant find them anywhere. think they are pretty rare.
-
Helllo everyone, my name is Claude Im from Columbia Missouri I own a 1st and send Gen civic and a 3rd gen Supra but my cousin has a 1987 nissan Stanza wagon with 80,000 original miles on it with firm body no dings or scratches. and she wants 400 dollars for it I dont have any pics yet and ive searched all over the net for info that is what led me here Ive heard about a turbo charged motor that was made in certain markets. My question is would this be a good platform to start a decent build and are parts readily available in your market cuz I know there are not in the United States lol. Should i let this one pass me buy or swap in a different motor like a Ca18det which i believe to be the turbo motor or any suggestions you guys can give me, I always wanted a unique nissan to own and this one you dont see everyday here in the US. Thanks guys for all the help in advance
-
is it something like this?
(http://farm4.static.flickr.com/3141/2494371783_6005fc4f58.jpg)
i have to say that would be fairly hillarious (in a good way) with a ca18det in it. these stanzas were awd ca20e werent they? if so, that'd be an awesome setup with the ca18det mated up to the ca20 drivetrain.
wouldnt be overly aerodynamic though :P
-
yes it looks just like that lol same color and all, it has sleeper written all over it imagine pulling up to a person in the family van and having your doors blown off by a soccer mom. Has anyone done anything remotely similiar to this swap and I have a feeling it may not be a straight conversion. Any thoughts, I dont know if this is all wheel drive or not but some are.
-
if its a ca20e in there, then the ca18det is apparently a straight swap engine mount and gearbox wise, however you would need the wiring loom and ecu etc from the ca18det.. i dont think anyone here has modded one of these cars.. but i'm sure you'd get heaps of help and support if you tried.
that model stanza was called the nissan prairie here in australia.
just did a quick search, apparently the 4wd version is shorter than the fwd version, but just get under the car and have a look.
-
are there any other options besides the ca20e to be in there, nissan prairie huh never heard of it. I've seen only a couple of these before and they are a bizzare looking vehicle. Wow and you say the 4wd is shorter I cant imagine it much shorter the car is pretty small. Now my next question is how hard is it to get a hold of a ca18det in decent shape. I appreciate the input Noss I'll do some more checking on the Nissan Prairie and see what i can dig up I doubt people bought this car for performance lol
-
wikipedia says that they only came with the ca20e.. but wikipedia can be pretty ordinary sometimes.
http://en.wikipedia.org/wiki/Nissan_Prairie
if it has the ca20e in there, that isnt bad for your upgrade potential. but then i guess no engine swap is truly easy :P.
not sure what a ca18det would be worth in the states, but in australia i'd guess around AU$1500-2000 for a front cut.. i'm not sure if you can buy motors like that in the states, but basically a front cut is the car from the bottom of the windscreen forward, dash, ecu, front suspension, motor, and well, everything inside the engine bay.
edit: you would need an east west (transverse mounted) motor, which means the ca18det from a u12 bluebird.
-
So where would i need to go to buy such a motor I have never heard of a bluebird Im assuming it is a like vehicle in a different market
-
bluebird is the jap version of the u12 stanza.. i'm not sure where you would buy an engine/front cut from in america.. we have import wreckers (junkyards) here, i'm not sure if you have stuff like that there.
-
this guys at the yards will sell you anything for the right price lol so in order to get what i want I need to look for a bluebird that has been imported or buy one from abroad, so am i just looking for motor or do i need the tranny also If i remember correctly it can bolt right up right and do you have a name of one of your local wreckers you could supply me with or a site Thanks
-
www.adelaidejap.com.au
www.japparts.com.au
www.asianautospares.com.au
also there are a few listed here
http://www.antrx.com/smf/index.php/topic,5058.0.html
-
Thanks for the help I really appreciate it
-
This is what I am hoping for I have not set a budget to the build but I want it as close as possible to this and I am shooting for a 2 to 3 year build. I have a 79 civic I am trying to finish first, you probably can relate to finishing one before you start another but i really appreciate the help on the motor stuff
Here is the link to the concept of what I want http://s540.photobucket.com/albums/gg360/clcla4/Nissan%20Mockup/
-
Hi Everyone...I introduced myself in September, but do far more reading than posting. Thanks to everyone for the interesting information. Since I got my U13, I've upgraded the stereo (still half-way on this thanks to the failure of my brand new, under warranty Kenwood CD deck), tinted the windows, and I also built myself a nice little CAI using a 45degree exhaust pipe bend and a rubber joiner from a pool shop. (yes, the exhaust pipe piece was sealed and painted to avoid rust.) I'm amazed at how much better the performance is.
Now to get to the point, and the reason for this post.
I also had the not unusual crank angle sensor failure, which evolved into a new distributor, a broken radiator ("there's no way you can break a radiator changing a distributor" yeah, sure) and a week at the auto-electrician. I've also spent a small fortune (for me) on the suspension. It really needed new shocks and bushes etc...and also had/has a rather unpleasant noise in the front. This whole exercise is beginning to be a real drama between me and the company involved, since despite numerous visits, the original noise hasn't changed, even though I have repeatedly told them what is happening and yet they still refuse to even examine what I believe is causing the issue.
As you can see, I've had a crappy time with companies and it is really giving me the shits. Is there any particular etiquette for complaining about specific companies? Of course, it would be in a purely factual way. I just feel that this is a good place to use the power to exercise the power of 'word of mouth'.
-
Gday folks, Andrew is my name.
Since late 2000 ive been the proud owner of a 1991 U13 Atessa. Im from Adelaide orginally but for the past 3 years I have lived in Renmark. Since moving up here I havent done SFA to my 'bird at all and its been sadly neglected. Lately I have been thinking about selling it, its getting old and im nearing 200k on the clock (190k atm) but im going to attempt to breathe some new life into it with a couple of upgrades to keep my interest in the meantime. I bought the car stock and since then have done the following mods (that i can think of anyway):
Full Whiteline Suspension Kit (Including Engine Strut Brace)
DBA Slotted Rotors Front and Rear
Full 3" Exhaust with JunBL Twin-tip box
K&N Pod Filter
GFB "2 Way" BOV
Turbosmart "Stealth" Boost Controller (Havent touched it since it was installed and tuned)
Bosch "Intank" Fuel Pump (Not sure what it was rated at, 400 i think...)
Daughter-board chip by Chiptorque
17" Speedy Lite-6 Rims
Cosmetics wise it has side skirts, rear bar and front lip from Carmate
Thats most of the major stuff I can think of...scanning through the multitude of dyno charts i have the latest one is after the fuel pump was fitted and at 14-15psi boost the car made ~175kw on Jaustech's (SA) "Dynapack" Chassis Dyno back in Jan '05. So an ATW figure would be lower than that of course, probably 140-150ish.
The car has been down the 1/4 mile at A.I.R (I did have the ticket somewhere...) and best time was a 13.37 which was on standard rims and prior to fuel-pump and final tune, but was also several thousand k's ago.. :D
So here are some piccies
(http://i247.photobucket.com/albums/gg124/u13atessa/th_DSC09861-1.jpg) (http://s247.photobucket.com/albums/gg124/u13atessa/?action=view¤t=DSC09861-1.jpg)
(http://i247.photobucket.com/albums/gg124/u13atessa/th_DSC09864.jpg) (http://s247.photobucket.com/albums/gg124/u13atessa/?action=view¤t=DSC09864.jpg)
(http://i247.photobucket.com/albums/gg124/u13atessa/th_DSC09865.jpg) (http://s247.photobucket.com/albums/gg124/u13atessa/?action=view¤t=DSC09865.jpg)
Plans currently are to upgrade the intercooler system and then perhaps do injectors, turbo and afm but depends on costs since im still not sure if i'll be keeping the car for too much longer...
-
hey all my names daniel just bought a 1990 pintara trx for 1500 bucks lols. working on it as a project car normally drive a mazda 323 astina 2.0ltr v6 other than that the pintara is fairly stock but yeah.(http://img195.imageshack.us/img195/3081/s6303698.jpg)
(http://img196.imageshack.us/img196/6996/20819817a10723018785l.jpg)
-
Gday Im Rob
Drive a 91 Pintara TRX
Im a Mechanic
Live in western sydney
Mods include: exhaust, Pod filter, CAI.
Future mods: Antrx stage 3 cam and chip....soon as I get my injectors and AFM.
-
hey im james commonly called jaynar evrywhere i live in brisbane am 19 and have a r31 pintara i have a well knoledge of toyota engines and honda sohc non vtec as it was my last car an ed3 civic that was a 1.5 carby that kept up with a 4agze levin and TRD aurion on last years Twincam.org bris cruise i like to do a job to the best of my ability and belive i have a good mechanical knoweledge and im always learning so if any questions car related or what ever fire away and ill get back to you asap
sorry bit of a ramble but nice to say gday and hope to get to know you all alot better
-
Hi I'm Gnomes and am so glad I have found this site to read fab posts and ask for help from those who know my car. I'm a mum of 2 gorgeous boys in Cranbourne who has been driving a Ford Corsair GL 2.0 5 spd manual Hatchback for the past 7 years. Great car and I can't understand a local used car dealer who said "it's only fit for the wreckers if you trade it to me". (The other half was test driving a car). Phwah - what does he know! Great car with a little hiccup presently, but am happy with bugger-all rust in her - just a tad in the hatch behind the indicators - whoopie do dar day! Cars less than 5 years old have more rust in them these days! Only upgrade I've given her is to pull out the Ford tape deck & radio, to put in a Sony CD player with inbuilt tuner! Arrgghh the joys of listening to Playschool instead of Noiseworks! *Giggles*
-
Hi I'm Gnomes and am so glad I have found this site to read fab posts and ask for help from those who know my car. I'm a mum of 2 gorgeous boys in Cranbourne who has been driving a Ford Corsair GL 2.0 5 spd manual Hatchback for the past 7 years. Great car and I can't understand a local used car dealer who said "it's only fit for the wreckers if you trade it to me". (The other half was test driving a car). Phwah - what does he know! Great car with a little hiccup presently, but am happy with bugger-all rust in her - just a tad in the hatch behind the indicators - whoopie do dar day! Cars less than 5 years old have more rust in them these days! Only upgrade I've given her is to pull out the Ford tape deck & radio, to put in a Sony CD player with inbuilt tuner! Arrgghh the joys of listening to Playschool instead of Noiseworks! *Giggles*
Welcome! I used to live in Cranbourne, around 15 years ago lol. Hope you find the site useful :)
-
hey guys, i'm nick a new member from Phillip island, just recently brought a trx and i love the car.
its a 1990, gun metal Grey, stock body kit, "seven" 17 inch rims, sleeper car, getting a gt wing put on it tomorrow.
I'm not car nerd, so just wanting opinions about the current setup, as far as i know
Engine : ka24
Turbo : Turbo smart Hi Flow t3 (Currently 7psi)
Inter cooler : Unknown brand, but its huge
BoV : Turbo smart 6 Port
Clutch : Brass Button
Transmission : Supra 5sp Short Shift
Engine Management : EMS (Box is under passenger seat)
Exhaust : 2 1/2 inch straight though to what looks like a stock muffler with a different tip
getting turbo timer and boost gauge installed after roadworthy and putting bov back on (in victoria)
the previous owner told me with the transmission, dont slow down though gears like a normal manual,as it will kill the transmission sound right? also have noticed a noise coming from the centre of the dash between 2k rpm to 3.5k rpm and its kinda annoying, its a "whining" kinda noise.
Had a comp sound system which has mostly been removed minus the jvc 6 stack and the rear parcel shelf speakers, anyone recommend good quality head unit and speaker/amp/suby setup than itsnt gonna cost the earth.
-
hey guys im matt
17 live in qld
own a 89 "ford" corsair ghia 2.4 manual of course
odo stopped at 415.513 and its probably got about 2,000 km or so more added to that now
umm second owner
purchased off my cricket coach for 200 bucks with 7 months rego so yea..
cruised around google and saw this so i joined up
umm... no mods as such
exhaust is broken and sounds pretty mean but thats about it haha
plans atm: cai, lowered, stereo, fixed exhaust
complete rebuild/conversion to another ka24
then yea just play with it till i get bored
-
hey guys i'm Darcy from Melbourne
Ive got a u13 atessa (manual)
only basic mods, lowered, 3in turbo back, intercooler and stereo
just wondering if any one has part numbers for front and rear pads for my car? repco had no clue and couldn't really find out on search
lovin the site, cheers
-
welcome mate, what colour is your attesa? I've been seeing a grey coloured one around ivanhoe, heidelberg a bit over the last few months, lowered, etc
-
hey budgie, thanks yeah its good to be here
my cars black and unfortunately sporting a decent key mark down the left side
live in stkilda and gf's house is in glen iris with work halfway in between so mostly around those areas cant say ive been through Ivanhoe etc for a while, must be another. anyways thanks for the welcome. would you know the Bendix part number for u13 attesa front pads by any chance? cheers
-
I've seen a u13 atessa on Alma rd a few times before, I think the j30 maxiam front pads fit.
-
yeah that would be me... thanks mate il look into that
-
Greetings/Hello/G'day all!
My name is William and I'm in California, USA. I am here to share stories, learn about tuning options, buy parts and even help find parts for you. I own several other cars including a Sierra Cosworth replica project I'm working on. There is little to zero support for the U12 Stanza here in the U.S, but generally can find any replacement parts cheap. I have owned three U12 Stanzas (one was hit while parked) and still have two, I bought one three weeks ago from an old lady owner (original) with 157km original miles. My other one has over 317km but I've replaced the timing cover/oil pump, timing chain, many other parts and completely reworked the head. I also ported the stock exhaust manifold because it had bad casting overlap on the ports and there is no header readily available here.
I am hoping to buy suspension parts (springs, sway bars, bushings and shocks) and learn about mods you all have been doing. Thanks for your time and I look forward to spending some time here, though honestly I am active on a few other forums as well.
-
hi & welcome, i guess the ;D majority of us are also on a few other forums. the more knowledge the better i say...
-
Hey Guys!
Sweet Website and forums!
I don't own a trx (currently N14 Q 2.0i) but i would love one.
Keep up the good work.
Giacamo
-
Hi im Rohan aka Stalker live in Perth Western Australia
drive a 85 bluebird series 3, 5spd manual
current mods are 2x 12" mtx thundercross subs running from a mtx 300w monoblock, new deck and 6x9s on the back shelf, with a 3" tacho
no engine mods so far but planning to turn into a rally car
o and the broken rear right indicator would really love if anyone has any spares of this i require the entire housing and can find any
-
Hi to all, my name is Andres from Costa Rica I'm 27 years old.
I own a 1991 Nissan Bluebird Attesa with the SR20det engine on it. It's completely stock. I bought it last January. It's a sweet ride and the big reason why I switch from having a Honda to a Nissan. This car use to belong to the Japanese Embassy in my country, It's crazy how stock this car is, no modifications at all after almost 20 years. I have some modifications in mind that I would like to do. For example the clutch is almost dead so I planing to a ACT or Nismo Clutch kit, but I dk if its the same one the the GTir uses.
I found out about antrx.com looking on GOOGLE information about my car as I mentioned before I am new on Nissan. It's really cool what you guys have here.. Keep up the good work...
-
Crazy, from the japanese embassy in Costa Rica? Thats cool :) Welcome mate!
-
Yeah... The guy I bought it from have it park on his garage for 2 years, So I have to do a complete tune up on the car.... I just buy a headlamp on ebay from one guy in Australia because I was missing one. My car is really hard to find parts in my country.. I basically have to buy the majority online and overseas.
I'm learning a lot about this car in this forum like things from other cars that fit to mine. ;D ;D ;D
-
G'day lads, gentlemen and Nissan fans/tinkerers alike. I am a forum noob and I'm soon to be a blurbird owner.
I have enjoyed checking out many aspects of this site yet have no idea how forums even operate so plz bear with me. This be my first ever post.
My name's Matthew from Adelaide and I've lined up my next ride, the blurbird, just awaiting the sale of my current ride which has been very good to me. I am the second owner of my little economical 3dr '96 Peugeot 306XR. Under 138 thousand kms that is up for sale on carsales.com.au in South Australia and is dark metallic grey.
I wish to say that this site has already been so valuable and informative in getting me ready for my new ride, that I know exactly where to turn to learn and share information about all my things Nissan/Datsun... And this will no doubt be incredibly inspiring and helpful for years to come. I look forward to hearing from anyone regarding Nissan/Datsun clubs/events or restoration.
Regards, Matthew.
-
Welcome matthew, I'm assuming your buying a U13 Bluebird?
-
Hi budgie, Thanx for the welcome. Can't believe I didn't specify but Yes you have assumed correctly, the U13 Blurbird. I just can't wait!
-
Howdy all Names Kyle, I've been on this site and I've gotten my hands on a U13 SR20DET 4wd bluebird off Jeffrido from this site. So i am a new Victorian member and i must say i love it its such a sleeper :D current mods to the car (that i know of)
Water to Air top mount
Pod (full stainless steel boxed enclosure)
Battery moved to the boot.
Big exhaust (i hate it to big and tips look gay)
Thats all i know of for the time being haven't driven it in about a month as I've been getting the clutch done due to a dodgy mechanic being lazy putting the aftermarket clutch in. (the aftermarket one shattered due to the wrong clutch flywheel + Clutch match up and some dodgy spacer plate....)
So expect to see some posts on some info about these little beats ;)
All and all i love it just with it had the Heads up Display ;)
-
welcome mate, they are a good little car!
I know the car your talking about with the U12 top mount converted to water to air.
We are looking to meet up soon for a cruise, you should join ;)
-
hey my names dave im in the brisbane area and im currently driving a 91 pintara Ti with lowered king springs, munroe gt struts and a 2 v1/2 inch exhaust with highflow cat etc if anybody could help me source some trx kit ands 15 or 16 inch rims in the area please PM me im also lookiing at putting a ka24de in with high comp pistons
-
Hey all, im Damien, Just recently bought a 1992 Pintara executive hatch Maroon in colour with 104,660klms its the 2.0L twinspark motor with auto im the 3rd owner of it my friends had it & an old couple who looked after it had it before them/original owners.
i used to drive a 93 subaru liberty lx but i think this pintara is a better car.
probly only do a few mods to it as i only drive it to work & back for now.
cheers
DamieN.
;D
-
Yoyo.
Crazy2287. A year or so ago i got 2x ford corsair's ghias for $150. spend a weekend swapping bits till i had a complete car. zorst was shat so i welded a std exhaust off an XF falcon onto it. took it in and passed it for rego. Been my daily ever since.
It's always had a timing chain rattle dispite several oil changes and a 20-60 grade oil with stabilizer. So i pulled it apart and attempted to replace the timing chain. Positioned the broken link at the top of the cam-gear and figured i'd just feed the new chain in.
Due to me been slightly retarded, as i slid the broken link out, the cam chain slipped up out from under my finger and down into the sump. The tensioners pressure rotated the crank and put everything out of sync. bla bla bla tried to take a short cut, bent valves now im swapping heads with the spare, so im here to see what i should do since im going to have the head off.
Figure out if i should do any performance mods (shave head? cam?) or just whack it back together.
That's my story.
My other car is an XF falcon sedan that i've spent a few years working on. brought it grandpa spec and now its "get me in trouble all the time" spec so i gotta fix this damn corsair quick so i can put the falcon back in the shed ^^;
i like killin zombehz and i drink (points left) scotch.
Also i have 4 chickens, they pump eggs which i eat 8D OM NOMNOMNOM
-
Hi to Everyone of you Nissan Nutters.
Even though I've been reading and learning from this site for ages now, I have only just put up my first post, soooo I thought I should perhaps introduce myself.
My name's Rob and I am from Canberra. Been driving for about 19 years with no accidents. Touch wood.(touches willy). ha ha. Except for the lovely, skilled and highly aware old bat that reverse into me in a carpark last year. GRRRRRR. still not happy with the repairs. F#@Kn Dum@$$ Old B!+*h. Anyway... where was I? Oh yeah...
Started off in a 85 Bluebird (Mum's), Traded in for my 94 Bluey 4.5 years ago, (love it), went halvies in a 96 Bluey (now for sale) for my Girlie, and Just got me a R33 skyline 4door. NISSAN FREAK. When you're on a good thing why change?? Eh?? As I said, have learnt heaps from here what with oil in dizzies etc so I applaud you all on a great site and hope to continue to learn more from you all in the future. Perhaps I may even be able to help some of you out myself with some of the knowledge I have acquired along the way... Baptism of Fire. Cheers. Rob. PS. I like stories...
-
well, hello every one. I'm the newbie. but not so new to Nissan. I currently live in New Bern, NC US and have been a mechanic at Nissan for going on two years. proud to be part of such a lively and well put together forum. if there are any technical questions or other techs don't hesitate to talk. I own a 96 Altima. so far i have done a rear drum to disc, tan to charcoal interior(rather have black), leather steering wheel, and had both fogs until i had a wreck few months ago >:(. as soon as i get my tax money here in a few weeks ill be starting my engine rebuild. don't have anything crazy just a stock 2.4. but it has a few intake leaks and needs valve stem seals so i figured id id a complete rebuild while shes out. my plan is to get hold of some factory alloys and i have no idea what car the front bumper i want comes from.
-
Hi guys, I'm Zennon 19 years old, from Perth Western Australia.
I drive a 1991 Nissan Pintara TRX
Nothing done to it soon, but lots of things on the table for it.
-
hey guys,
Long time lurker. Thought I'd say hi.
I've got a 1992 Nissan Bluebird Attesa / Auto / SR20DE which I inherited it off my dad.
Its stock as f*ck cos i'm such a noob when it comes to cars. But ya gotta love the Bluebirds!
I reckon it's the perfect sleeper.
-
In AU mate? Or NZ?
-
I'm in Syd!
-
Interesting, auto seduction and non-turbo. The best thing I can recommend is look after the auto box. They are big, heavy and bloody annoying when they break
-
welcome all newbies.... ;)
-
Hi.
Names Roy and im living a little bit north of gympie
Couple months back i scored a 1990 corsair fish off my brother for bugger all because he was haveing issues with rego and couldent be bothered with it. Igor it on the road but it still needs bits done.
Mods are
Lowered
17's
Exhaust and air filter.
Wont be a bad daily once i get the last few things fixed.
Cheers
Roy
-
Hello everyone.
So glad to be here, I had been trying to sign up last week, however the auto-anti-bot picture thing kept thinking I was not human...anyway im here now.
So I currently drive a 97 nissan pulsar with a gutless 1.6 with 200000k.
A few weeks ago I picked up a hnu12 sr20det engine.
So ill be here to learn bits and pieces about the enginge and to sell the Auto 4wd attesa gearbox.
-
Hello there my name is Eddie. I am in the U.S. and recently purchased a 1991 Nissan Stanza 5spd. Always been a Nissan fan and also owns a 1973 Datsun 240z. After my 83 Ford LTD broke down I bought the Stanza as a daily driver but just recently found out that a stanza is a bluebird in Japan so it may be a second project car when I get the LTD back up. I have been browseing the forums and found a lot of info that I couldnt find anywhere else thanks antrx.
-
Welcome one and all :)
-
Hi everyone
I signed up a while back now but haven't regularly read or posted anything. I've got a '92 U12 Pintara, maroon 5 door, which has definitely seen better days. It absolutely refuses to die though!
This forum has been the only place I've found that's diagnosed the stuttering engine over 2500rpm problem, which is great. I still haven't had it fixed, but it's good to know it's a known issue.
-
Hey guys my name is Kyle I haves stock 91 stanza and I also own an s 12 Silvia. I'm from the us and im glad to find this site
-
welcome guys, and i'm assuming (horn)girl?
-
Yes, girl :-) Realised later on that my choice of username was probably questionable, but I use it in a lot of places - I'm a french horn player, so that's why.
-
Yes, girl :-) Realised later on that my choice of username was probably questionable, but I use it in a lot of places - I'm a french horn player, so that's why.
And one day at band camp... :D
Sorry, I couldn't resist. Welcome, it's a great forum with a stack of info as you've already found
-
Hey guys.
I'm Sam, I've been a member for a bit now but this is my first post.
I own a 1990 ca20 Corsair, which I bought at the start of this year for $900 ;)
The old guy that owned it, had it for 7yrs before me, and bar the dust (he lived on a dirt road) its in quite good nick.
Its only done 170,000kms which was the major selling point.
I plan to play with it whenever I have money (uni student) but for now its still completely Granny spec, except for the stereo I put in.
If all goes well and I start fixing it up I'll add photos, but yeah just an intro post! :D
-
welcome all ....
is this you horngirl.. ;D
http://www.youtube.com/watch?v=3xRQpab1JZM (http://www.youtube.com/watch?v=3xRQpab1JZM)
-
i think i'll step in and say that was a little inappropriate. stop trying to scare away the newbies. it was a scion, clearly not french.
-
ya sorry about that... ::)
-
Hi Guys,
I just bought my self a Pintara U12 T-sport with K24E engine.
I wondering who I can look for, for the ECU chip tune?
Since it's on the front of webpage.
I will do some convertion with bluebird u13 from my mates car because he just get a hoon law defect. LOL. So I will use his car as a donor.
Thanks guys..
-
Hi guys, my names Matt (obviously) and I dont actually own a Pintara, currently an ae92 corolla seca. Am interested in moving on to a U12 TRX though.
Just had a few questions basically. How does the Pintara vary to the JDM Bluebird SSS? (suspension and brake components? I assume the SSS had an SR20DET? Bumpers n stuff?)
I'm into the 'jdm' scene (for lack of a better term, jdm doesnt mean a damn thing anymore...) here in Sydney, active on twincam.org.au and jdmst, and I like tastefully modded cars, and thats the sort of approach i'd take to a TRX, just as I have with my seca- its not even an SX lol. But yeah, nice to find that theres actually a forum for these cars, they seem to have a lot of potential, especially as sleepers ahah.
-
Hi peoples just registered and thought I will hi, currently just started a new job and am starting to look for a second work car and I've came across the Nissan pintara which looks like a good car, looking at one for $600ono with just the gauges not working on it etc and manual etc,
Currently have a ford ef Fairmont which needs to go in the carport (all I got for a garage atm) to get things done on it, hence also the second car.
Anyways just wanted to say hi and will defiantly post pics when if I get the one I'm looking at.
Hope this is the right place to put this.
Sent from my HTC Desire HD using Tapatalk 2
-
Hi names Pat (Obviously), I'm situated around the northern suburbs of Melbourne
I recently Bought a '89 Pintara T manual with a Ka24e with 133,000km's on it.
The car is stock as could be but came with a Clarion head unit and kenwood tweeters and 6x9's on the parcel shelf installed by the previous owner.
Major issues recently was the starter motor decided to blow up, the radiator/ engine seems to either like its coolant or has a slow leak and Car is missing the odd bits and pieces (as most cars do).
Only thing I've added so far is my old pioneer amp and 1200w Sub.
Future plans for the car include in particular order (money and time dependant); exhaust + Extractors, air filter (Pod), lowered, wheels, TRX body kit, upgraded cam and ecu chip.
If by anyone happens to be selling any of the main parts please let me know.
Cheers guys see you around.
-
welcome guys,
as for upgraded parts , always check the for sale section, it gets pretty busy sometimes....and don't forget the search function.
-
hi my name is quinton. i am from spokane wa USA and i have a 1990 nissan stanza XE.
Shortly i am going to begin my project motor swap to a sr20det. this will be my first project car/first time doing really anything to a car..
wish me luck and i hope to find some good information to help :)
-
welcome aboard quinton. you don't see many sr20 conversions to stanzas in the US. should give everyone quite the nice surprise!
-
Grant from the Goldy here. Picked up a U12 TRX for $500 three days ago. Engine is buttery, especially for a car with 250k on the clock and a scoop bolted to the bonnet that leads nowhere, so I was pleasantly surprised. It has been lowered, and I stuck the Alpine headdy out of the old Forrester today, otherwise it is waiting for FR wheel bearing, some engine mounts, a bit of body and dash work. Mod wise, I figure i might as well start with a bit of CAI considering I already have a hole in the bonnet... After that, who knows? Hesitant to do the exhaust cos I love the note coming from the stocker. All I know is I'm keen to get her back to better than her former glory.
-
hi there i'm roy, just joined today.
Currently doing up a 03/90 u12 pintara t sedan with the ka24 motor.
my ride is a 90 pintara t fwd 2.4ltr stand set up...
re my profile pic of my ride doing up first then see maybe hoting it up
but starting to find it hard to get new parts in Australia for it
-
hey guys, my name is gray and im 19 years old and im living in Seattle Washington.
ive been working on engines since i was in grade school have owned a bunch of cars but i just picked up my first u12 6 months ago for 600$ and its one of the coolest cars ive ever owned. even though its got a ka24e in it she moves lol. i have alot of plans coming up for her this summer like silvia brick headlights, super select grill, pintara front bumper and fenders, TRX side skirts, trx rear bumper with lip, bluebird sss-r hood and bluebird sss-r front seats. i plan on throwing a turbo on the single slammer or building a sr20ve to throw into the car. id give you guys a link to my facebook page to look at my car but i cant post links apparently.
-
Welcome Roy and Gray
-
Hello im new in this community from QLD looking for informational topics with you guys... So go easy to me... Cheers :D
-
Welcome to antrx where in QLD are you
-
Hi my names David and i own a Pintara :) this place is like pintaras anonymous.
So i got a 1992 super-hatch T auto with less than 70K on the clock. just a rough guess as the clock has stopped at 56K but being my grandmas car i know it hasn't done more than that. Not much wrong with it, driver side back door central locking doesn't work and miner body damage, mostly car park crap. Nothing serious right ;D
I've had my fair share of modified cars but this is my first pintara and first on a tight budget. See a few years back i crashed my ute and was badly injured leaving me a paraplegic. I got my license back and bought this little granny car and had it modified for hand operated brake/acceleration.
Ever since i got the car i have been stalking this website so i figure it was about time to join and see what the community is like from inside the circle. I'm not sure which way to go with this car its a strange shape, not a wagon not a hatch. i figure i will slowly add little pieces to it until it becomes something or anything haha we will see.
-
Hey guys, my name is aaron im from MI, i have a 91 nissan stanza my end goal is a short course track car
-
Sorry for the slow response... But welcome to the forum guys
Where are you located damun
-
I live in Gulgong NSW. A small little town. So small the cops knock off at 10pm!
Sent from my iPhone using Tapatalk
-
welcome all, {[ DaMuN ]} could you post a photo of your mods re handbrake etc with your other pix, interested to see how you achieved this.
-
Posted the pics as requested on my other topic.
Sent from my iPhone using Tapatalk
-
Hello! My names Zach I'm 21 and I'm from Perth, I have a 1989 U12 Pintara, had it for almost 6 months now as my last car a 1992 Ford Corsair had its rear breaks fail :'( was going to cost well over $1000 to get it fixed so got my current car for $900 and am using the Corsair for parts :)
-
welcome zac.
-
Howdy all, new member here.
I've just bought a '91 Pintara Executive hatch. This will be a second car to be used as a runabout and eventually will be given to my daughter when she gets her licence. My main car, an MB 1992 W140 600SEL, is a bit much just to do the shopping and is currently off the road to do some engine work. I use it mainly as a land yacht for interstate trips at which it excels, but a 6 litre V12 lugging around 2200 kg is a bit pricey on fuel for city use.
The Pintara is quite low mileage, about 107K km and exceptionally clean. But the CA20E in it has a lot of blow by and I reckon the rings are worn out. I know this to be a common fault from owning an S12 Gazelle many years ago. I can fix that cheaply myself next year once my Benz is back on the road.
I would have rather had a KA24 based car; I almost bought a TRX years ago and liked it a lot. I've checked the forum for engine swap info but they are all quite old. What is the state of play regarding engines now? Are they still easy and/or cheap to come by? I'm not interested in a hi-po car, just a good reliable one for a first time driver. Probably just doing the rings on the current engine will be enough but I'd like to know my options.
-
In Queensland you can pick up a ka24 in decent condition for around 300, though it would probably be easier to pick up a cheap car with the ka and do it that way
-
Hey All,
My name is Ben, Living in Victoria
And I drive a 1991 Ford Corsair Ghia
Full 2.5 Inch Sport exhaust..... Many more Mods to come :)
-
Hey everyone, I'm Mick and I'm stuck with u12 pintaras haha. :P
-
haha "stuck" :P welcome mick.
-
Thanks noss. Yes it all started with a u12 executive I brought. Within 1000kms I had a cracked radiator. Which then lead to overheat , blown head gasket and losing the drive in my auto. it was an expensive excersise that lead to me fixing it up and driving it for another 4 - 5 years no major dramas since. I just recently found a clean low Km TRX planning to sell it. But after making a few repairs and a good service I refuse to let this thing go haha. I'm stuck and I don't give an asshat. :P good to meet you all I'm sure im in the right place here :D
-
hey all names Tom, father, web dev and all round car tinkerer.
hope to gain some more knowledge here and also impart some if i can.
have a motorsport background and have owned some of nissans finest, among other makes.
recently acquired a 93 sss bluebird which needed rescuing and having fun giving it a new lease on life.
cheers,
t.
-
welcome,you should find any info you need .The search function is pretty useful. if its not there someone should be able to help.
-
Hey everyone, just signed up. Got a 1990 Pintara T....cream, of course.
-
also quick question, i cant seem to post links.. is this a new member restriction thing or?
-
Hi guys, just wanted to say hi to everyone, I spent a lot of time reading this forum, and I finally decided to join. I bought Silvia Spec R, few days ago. Anyone with experiences with it is welcome to send me a PM