Author Topic: U12/U13 ATTESA dump pipe...  (Read 31243 times)

0 Members and 2 Guests are viewing this topic.

Offline Marty

  • west oz local moderator
  • post whore
  • *****
  • Posts: 1430
  • Karma: +11/-4
  • Gender: Male
  • *no car :(*
Re: U13 ATTESA DUMP PIPE
« Reply #30 on: Jun 28, 2007, 07:17PM »
same here.
Wanneroo (Barbagallos) short track time 63 seconds (58 - Evo) long track 79 (69 - Evo)
Mods - Bosch 910 fuel pump, Nismo 555cc injectors, Z32 AFM, USB Bikirom, Full Whiteline Handling Kit, DBA Rotors, Tomei Poncams + GT2871. (174ahkw)

Offline Jason

  • U12/13 mixer
  • antrx.com senior member
  • ****
  • Posts: 460
  • Karma: +16/-0
Re: U13 ATTESA DUMP PIPE
« Reply #31 on: Jun 28, 2007, 09:55PM »
Somehow i dont think the GTiR dump pipe will fit the Attesa. The GTir uses a different exhaust manifold which sits the turbo prbly about 20-30 mm lower than the Attesa. If you try and fit on of these on a Bluebird the exhaust will sit up that much further and i guess there wont be any clearance there against the sump. So unless you wanna use a GTiR exhaust manifold (like Luke is) then you might have to mod it to make it fit.

Just thought i might let you know before everyone jumps in with thier "count me in" and "ill have one too" lol.

Offline LUP15

  • antrx.com senior member
  • ****
  • Posts: 409
  • Karma: +4/-1
  • Gender: Male
  • formerly DIGITOBI
Re: U13 ATTESA DUMP PIPE
« Reply #32 on: Jun 28, 2007, 10:41PM »
looks very similar to the ces one. is it made of stainless steel? im sure the ces one is also 2.5" so no biggie. you can see it flares to a 3" near the end. but why does it have to be so damn long still? surely you could make it stop just after where the wastegate pipe merges...

but yeah if a groupbuy is happening im pretty keen.
Project LUP15 <-- Click Here      ||      If you're an enthusiast in QLD or anywhere else, support it --> Lakeside Raceway

Offline Budgie

  • Dr. B Udgie - AWD FTW
  • Administrator
  • post whore
  • *****
  • Posts: 9411
  • Karma: +131/-33
  • Gender: Male
  • U12-U13
Re: U13 ATTESA DUMP PIPE
« Reply #33 on: Jun 28, 2007, 11:38PM »
but why does it have to be so damn long still? surely you could make it stop just after where the wastegate pipe merges...

I could definatley ask him to do that, this would also avoid the GTiR turbo being mounted lower then our U12/U13's... as the rest of the pipe would be our existing exhaust, or modified to fit the split dump.
dont piss me off with your pillarless shit captain snappy wrist

Offline bluebird

  • antrx.com junior member
  • **
  • Posts: 55
  • Karma: +0/-0
  • new kid on the block
Re: U13 ATTESA DUMP PIPE
« Reply #34 on: Jul 9, 2007, 12:55PM »
I Have been looking at these split dumps for months.
No one is prepared to confirm 100% fitment to HNU13.
Even CES say they are pretty sure but cant confirm until they see the car.
I would definatley be in if it can be confirmed.
I am about to purchase a high flow cat soon so why not do both at once.
May be we need someone to offer there car as a prototype.

Offline Budgie

  • Dr. B Udgie - AWD FTW
  • Administrator
  • post whore
  • *****
  • Posts: 9411
  • Karma: +131/-33
  • Gender: Male
  • U12-U13
Re: U13 ATTESA DUMP PIPE
« Reply #35 on: Jul 9, 2007, 06:24PM »
I just emailed him then to see where he is located and if anyone can test fit (if its possible).
dont piss me off with your pillarless shit captain snappy wrist

Offline LUP15

  • antrx.com senior member
  • ****
  • Posts: 409
  • Karma: +4/-1
  • Gender: Male
  • formerly DIGITOBI
Re: U13 ATTESA DUMP PIPE
« Reply #36 on: Jul 17, 2007, 08:52AM »
any new info?
Project LUP15 <-- Click Here      ||      If you're an enthusiast in QLD or anywhere else, support it --> Lakeside Raceway

Offline Budgie

  • Dr. B Udgie - AWD FTW
  • Administrator
  • post whore
  • *****
  • Posts: 9411
  • Karma: +131/-33
  • Gender: Male
  • U12-U13
Re: U13 ATTESA DUMP PIPE
« Reply #37 on: Jul 17, 2007, 12:34PM »
I have sent him pics of my setup, a few days ago after he asked for them.  Waiting for a reply champ.
dont piss me off with your pillarless shit captain snappy wrist

Offline LUP15

  • antrx.com senior member
  • ****
  • Posts: 409
  • Karma: +4/-1
  • Gender: Male
  • formerly DIGITOBI
Re: U13 ATTESA DUMP PIPE
« Reply #38 on: Jul 18, 2007, 12:23PM »
eagerly awaits. thx for doing this budgie. i said i was going to be doing this, but i thought this was way more cost effective :)
Project LUP15 <-- Click Here      ||      If you're an enthusiast in QLD or anywhere else, support it --> Lakeside Raceway

Offline Luke

  • 173kw @ all 4
  • sth. oz local moderator
  • antrx.com junkie
  • *****
  • Posts: 998
  • Karma: +17/-4
  • Gender: Male
Re: U13 ATTESA DUMP PIPE
« Reply #39 on: Aug 9, 2007, 02:41PM »
Any updates???
Jason reffering to the OzVR4 Forum... "Even their forum is slow" "FJ20.com on the other hand, yep that S12 does Mono's"

Offline Budgie

  • Dr. B Udgie - AWD FTW
  • Administrator
  • post whore
  • *****
  • Posts: 9411
  • Karma: +131/-33
  • Gender: Male
  • U12-U13
Re: U13 ATTESA DUMP PIPE
« Reply #40 on: Aug 9, 2007, 05:43PM »
Luke, I have paid for one (early last week) and Andrew is making it for me as we speak.  Should have it next week he says.

Its just the dump section.  So I will be taking the pipe to my exhaust place and getting them to mate it up-to my existing 3" pipe.  Obviously I will post up pics/results once I get the dump and once its fitted.
dont piss me off with your pillarless shit captain snappy wrist

Offline Jono

  • The Wise Man
  • Global Moderator
  • post whore
  • ****
  • Posts: 5748
  • Karma: +159/-40
  • Gender: Male
  • memory boy!
Re: U13 ATTESA DUMP PIPE
« Reply #41 on: Aug 9, 2007, 06:43PM »
Very nice looking dump mate!
#1 Post Wh0re
pringles was here!

Offline bluebird

  • antrx.com junior member
  • **
  • Posts: 55
  • Karma: +0/-0
  • new kid on the block
Re: U12/U13 ATTESA dump pipe...
« Reply #42 on: Sep 5, 2007, 09:52PM »
Hi there,
Have not been on the forums for a while.
Any update on dump pipe group buy yet.
Has anyone had good results.
Thanks

Offline Budgie

  • Dr. B Udgie - AWD FTW
  • Administrator
  • post whore
  • *****
  • Posts: 9411
  • Karma: +131/-33
  • Gender: Male
  • U12-U13
Re: U12/U13 ATTESA dump pipe...
« Reply #43 on: Sep 5, 2007, 10:01PM »
Not a total CES style, but looks the goods none the less.  Arrived last week.  Not yet installed.  Might have to move my AC line slightly, but thats CA18DET specific which is annoying.  Looks like it will fit well otherwise.



dont piss me off with your pillarless shit captain snappy wrist

Offline LUP15

  • antrx.com senior member
  • ****
  • Posts: 409
  • Karma: +4/-1
  • Gender: Male
  • formerly DIGITOBI
Re: U12/U13 ATTESA dump pipe...
« Reply #44 on: Sep 6, 2007, 12:11AM »
that still looks great. considering the space restrictions i think hes done a great job. how good are the welds and how much did it set u back?
Project LUP15 <-- Click Here      ||      If you're an enthusiast in QLD or anywhere else, support it --> Lakeside Raceway

Offline Budgie

  • Dr. B Udgie - AWD FTW
  • Administrator
  • post whore
  • *****
  • Posts: 9411
  • Karma: +131/-33
  • Gender: Male
  • U12-U13
Re: U12/U13 ATTESA dump pipe...
« Reply #45 on: Sep 6, 2007, 07:20AM »
Welds look very clean to me.  I was told that its good work by a friends who welds stuff all day at shell refinery... if that means anything!

$250 to my door
dont piss me off with your pillarless shit captain snappy wrist

Offline LUP15

  • antrx.com senior member
  • ****
  • Posts: 409
  • Karma: +4/-1
  • Gender: Male
  • formerly DIGITOBI
Re: U12/U13 ATTESA dump pipe...
« Reply #46 on: Sep 6, 2007, 10:30PM »
nice! now just to get it on :D
Project LUP15 <-- Click Here      ||      If you're an enthusiast in QLD or anywhere else, support it --> Lakeside Raceway

Offline Craazy

  • Resident Attesa Driver
  • antrx cruise monkey
  • post whore
  • *****
  • Posts: 2431
  • Karma: +29/-5
  • Gender: Male
  • Lovin it long time
Re: U12/U13 ATTESA dump pipe...
« Reply #47 on: Sep 13, 2007, 05:54PM »
looks the goods budge!! now get to petes and put the bugger in


The Time Has Come To Battle It Out To The Death... SR24 vs KA24

The bluey must be revived to Life!!

Offline Budgie

  • Dr. B Udgie - AWD FTW
  • Administrator
  • post whore
  • *****
  • Posts: 9411
  • Karma: +131/-33
  • Gender: Male
  • U12-U13
Re: U12/U13 ATTESA dump pipe...
« Reply #48 on: Sep 13, 2007, 07:49PM »
Looks like I have an issue with the AC pipe... fucking ghey!

Due to where it runs, the waste-gate runner will hit it/touch it as it comes 'forward' away from the block a fair bit, then back down.

I'm looking into using a line from a CA20E powered corsair or a KN13 EXA to get around the issue.
dont piss me off with your pillarless shit captain snappy wrist

Offline LUP15

  • antrx.com senior member
  • ****
  • Posts: 409
  • Karma: +4/-1
  • Gender: Male
  • formerly DIGITOBI
Re: U12/U13 ATTESA dump pipe...
« Reply #49 on: Sep 16, 2007, 06:06PM »
gay. any pics? thought the guy who made it took the ac line into account ...
Project LUP15 <-- Click Here      ||      If you're an enthusiast in QLD or anywhere else, support it --> Lakeside Raceway

Offline Budgie

  • Dr. B Udgie - AWD FTW
  • Administrator
  • post whore
  • *****
  • Posts: 9411
  • Karma: +131/-33
  • Gender: Male
  • U12-U13
Re: U12/U13 ATTESA dump pipe...
« Reply #50 on: Sep 16, 2007, 10:04PM »
gay. any pics? thought the guy who made it took the ac line into account ...

not on the AWD CA18DET, they are very different (to the FWD/AWD SR's) and I didn't notice it!
« Last Edit: Sep 16, 2007, 10:12PM by Budgie »
dont piss me off with your pillarless shit captain snappy wrist

Offline LUP15

  • antrx.com senior member
  • ****
  • Posts: 409
  • Karma: +4/-1
  • Gender: Male
  • formerly DIGITOBI
Re: U12/U13 ATTESA dump pipe...
« Reply #51 on: Sep 16, 2007, 11:01PM »
ah yes i c.. any idea if it clears on the sr20s?
Project LUP15 <-- Click Here      ||      If you're an enthusiast in QLD or anywhere else, support it --> Lakeside Raceway

Offline LUP15

  • antrx.com senior member
  • ****
  • Posts: 409
  • Karma: +4/-1
  • Gender: Male
  • formerly DIGITOBI
Re: U12/U13 ATTESA dump pipe...
« Reply #52 on: Oct 19, 2007, 03:06PM »
ive got myself one of these dumps now. im gonna be getting it ceramic coated before hand. however i would like to trial fit the dump... is it  difficult much to take the dump off on the attesas?
Project LUP15 <-- Click Here      ||      If you're an enthusiast in QLD or anywhere else, support it --> Lakeside Raceway

Offline Rake

  • vrrrmm sssssh pstch
  • antrx cruise monkey
  • post whore
  • *****
  • Posts: 3216
  • Karma: +60/-18
  • Gender: Male
  • quack
    • http://www.tldr.com.au
Re: U12/U13 ATTESA dump pipe...
« Reply #53 on: Oct 19, 2007, 03:26PM »
I am so in. I'm almost certain I've got a stock dump. And when I first laid eyes on a stock vs aftermarket dump pipe (not sr, but nonetheless) I thought of my car and was like "Daymn I bet mines got a strangled throat on it!"

Given GTi-R's have smaller engine bays and AWD I don't see why any U12, be they FWD or AWD, have major issues with these dump and front pipes...

I'll look over this thread in more detail (i only noticed it now) tonight, didn't notice it 'til now:(
« Last Edit: Oct 19, 2007, 03:33PM by Rake »

Offline Luke

  • 173kw @ all 4
  • sth. oz local moderator
  • antrx.com junkie
  • *****
  • Posts: 998
  • Karma: +17/-4
  • Gender: Male
Re: U12/U13 ATTESA dump pipe...
« Reply #54 on: Oct 19, 2007, 03:42PM »
Yep I want one of these ASAP. What do I have to do to get one?
Jason reffering to the OzVR4 Forum... "Even their forum is slow" "FJ20.com on the other hand, yep that S12 does Mono's"

Offline Budgie

  • Dr. B Udgie - AWD FTW
  • Administrator
  • post whore
  • *****
  • Posts: 9411
  • Karma: +131/-33
  • Gender: Male
  • U12-U13
Re: U12/U13 ATTESA dump pipe...
« Reply #55 on: Oct 19, 2007, 03:58PM »
Email Andrew... AM Performance

[email protected]

Tell him Ryan with the U12 bluebird sent you and that you are chasing a dump pipe for your U13 Bluebird.
dont piss me off with your pillarless shit captain snappy wrist

Offline Luke

  • 173kw @ all 4
  • sth. oz local moderator
  • antrx.com junkie
  • *****
  • Posts: 998
  • Karma: +17/-4
  • Gender: Male
Re: U12/U13 ATTESA dump pipe...
« Reply #56 on: Oct 19, 2007, 04:01PM »
will do :)
Jason reffering to the OzVR4 Forum... "Even their forum is slow" "FJ20.com on the other hand, yep that S12 does Mono's"

Offline bluebird

  • antrx.com junior member
  • **
  • Posts: 55
  • Karma: +0/-0
  • new kid on the block
Re: U12/U13 ATTESA dump pipe...
« Reply #57 on: Oct 19, 2007, 11:32PM »
hi,
please keep me posted on this.
My u13 attessa badly needs a dump pipe.
When someone has successfully fitted this dump to a u13 please post the exact costings including
installation and how it performs afterwards and any problems.
I also will be in.

Offline LUP15

  • antrx.com senior member
  • ****
  • Posts: 409
  • Karma: +4/-1
  • Gender: Male
  • formerly DIGITOBI
Re: U12/U13 ATTESA dump pipe...
« Reply #58 on: Nov 29, 2007, 10:43AM »
Project LUP15 <-- Click Here      ||      If you're an enthusiast in QLD or anywhere else, support it --> Lakeside Raceway

Offline Luke

  • 173kw @ all 4
  • sth. oz local moderator
  • antrx.com junkie
  • *****
  • Posts: 998
  • Karma: +17/-4
  • Gender: Male
Re: U12/U13 ATTESA dump pipe...
« Reply #59 on: Jul 1, 2008, 08:38PM »
Just ordered a dump pipe from this guy tonight. Im getting the longer one which goes halfway under the engine, I decided to go for this for 2 reasons. The first was to make the wastegate pipe as long as possible, second was that I wanted as much flow as possible. At no point on my exhaust will there be less than 3 inches of piping. The wastegate pipe will be 1.5 inch, and the turbo pipe will be 2.5 inch opening to 3 inch BEFORE the wastegate pipe joins back onto it. I will get photos of it when I get hold of it next week.
Jason reffering to the OzVR4 Forum... "Even their forum is slow" "FJ20.com on the other hand, yep that S12 does Mono's"