Author Topic: Pintara ka24e fwd  (Read 1996 times)

0 Members and 1 Guest are viewing this topic.

Offline Wildwest

  • antrx.com newbie with pewbies
  • *
  • Posts: 5
  • Karma: +0/-0
  • new skids in my jocks
Pintara ka24e fwd
« on: Jan 26, 2019, 03:41PM »
Hi all

I have a trx  ka24e with a crack in block which runs across cylinder wall . Is this a common problem  ?  Other than this the engine was perfect . Will a ka24de or an sr20det swap over without too many mods ?

Thanks

Offline deviate

  • antrx.com senior member
  • ****
  • Posts: 429
  • Karma: +0/-0
Re: Pintara ka24e fwd
« Reply #1 on: Jan 27, 2019, 10:54AM »
Hey mate, cracks in the block definitely aren't common, a ka24de engine swap is relatively straight forward you're best off getting a wreck to do it though.

You'll need some connectors, ECU and mounts from the donor car. Plus there's a little wiring involved, nothing too drastic.

Offline Wildwest

  • antrx.com newbie with pewbies
  • *
  • Posts: 5
  • Karma: +0/-0
  • new skids in my jocks
Re: Pintara ka24e fwd
« Reply #2 on: Jan 27, 2019, 12:29PM »
Thanks for the info . Will the ka24de engine mount up too pintara  5 sd gearbox ?

Offline deviate

  • antrx.com senior member
  • ****
  • Posts: 429
  • Karma: +0/-0
Re: Pintara ka24e fwd
« Reply #3 on: Jan 27, 2019, 03:52PM »
Sure does, she'll bolt straight up

Offline Wildwest

  • antrx.com newbie with pewbies
  • *
  • Posts: 5
  • Karma: +0/-0
  • new skids in my jocks
Re: Pintara ka24e fwd
« Reply #4 on: Jan 27, 2019, 04:12PM »
Thanks for your input .one last question will the pintara gearbox mate up to the sr20det engine . H
« Last Edit: Jan 27, 2019, 04:26PM by Wildwest »

Offline deviate

  • antrx.com senior member
  • ****
  • Posts: 429
  • Karma: +0/-0
Re: Pintara ka24e fwd
« Reply #5 on: Jan 27, 2019, 05:33PM »
I'm not 100% if it's a straight fit, it has been done though, check out kranzy. He did it

Offline Wildwest

  • antrx.com newbie with pewbies
  • *
  • Posts: 5
  • Karma: +0/-0
  • new skids in my jocks
Re: Pintara ka24e fwd
« Reply #6 on: Jan 30, 2019, 02:39PM »
Are seals and bearing available for distributor for ka24de bluebird . If so who sells them  and does anyone know part numbers .

Offline Wildwest

  • antrx.com newbie with pewbies
  • *
  • Posts: 5
  • Karma: +0/-0
  • new skids in my jocks
Re: Pintara ka24e fwd
« Reply #7 on: Feb 13, 2019, 04:03PM »
Can anyone tell me if the ecu from  an auto ka24de is any different from a manual gearbox set up .. will they interchange .

Thanks