[ antrx.com ]
U13 Bluebird & Altima => u13 general tech & queries => Topic started by: Damo on Jun 17, 2009, 11:35PM
-
hello, I have just got myself a U13 Atessa turbo and bought it with a broken gearbox and im having a much harder time finding a gearbox or even parts for it ... nissan worldwide are saying the parts for a U13 attesa gearbox are no longer made so i have been looking around this site for a long time now trying to find out if the GTI-R gear box will go into a U13 attesa or if the gearsets in the GTI-R are the same as the U13 attesa.
Ive spoken to a number of different places in Melbourne and they have all told me different stories so im not sure who to believe .....
Also i have been searching for hours to see if i were to get a GTI-R gearbox and make it fit my U13 Atessa, are all the diff ratios the same or different
If anyone could help with this i would be very happy, Ive had the car for over a month and yet to drive it :(
-
the gtir gearbox and the attesa gearbox are basically the same.The two differences are the ratios inside are slightly different,but wont make any difference.Theother difference is the transfer case. You just use your original case.Usually they dont have any problems unless they have 200000 plus ks on them,or the gearbox has been severely raped /pillaged and thrashed for a long time.The gearbox i'm running is from a gtir.(Mine has now been made into a ppg dog box,but is still basically gtir) graham :)
-
thanks for that ... so if i bought a complete gtir box i could just pull it apart and swap over the gear sets?, or could i use the gtir box and just swap over my original transfer case?
-
Don't pull it apart, there is no need, just take your transfer housing off and put it onto the GTiR one. That will keep your rear diff ratio correct.
-
awesome thank you ... now ill just have to find a gtir box ... ive been putting off getting it because of not knowing if it will work
thanks again
Damien
-
just one more thing ... if my transfer case is screwed too how hard are they to source
-
They really dont give many problems.If it is stuffed,and it shouldnt be, i have one in my shed that is ok.graham
-
You may be able to get an u13 attesa box. ;Dtry pulsar.org.All the sr20det motors that have gone into pulsars cant use the gearbox.thats how i have bought a couple over the last few years.
-
Your in Melbourne mate?
Come for a cruise with us once your car is running, there are more and more ATTESA's in the club now-days.
This is about the only place you'll find ATTESA owners in numbers, we hang around PGA as well but all the U12 and U13 ATTESA knowledge is here!
-
Ok there has been a slight problem the gearbox I thought was availiable isn't so back to looking for either a new gearbox or the parts in my gearbox that are broken which is
The input shaft
1st gear
Both reverse idlers
And the 3/4 shift springs
If anyone has these parts or a gearbox lying around let me know
And yeah I would come for a cruise for sure although the car needs some tlc because I only just got it so it won't be in the best of condition to begin with but it will get there slowly
-
Probably too late now, but I'm 99% sure that most of the internals of a FWD 50 series box fit the 4WD.
I'll be able to confirm in a few weeks...
-
Interesting scribble! Keep us posted mate.