Author Topic: ABS fault codes and how to clear  (Read 2639 times)

0 Members and 1 Guest are viewing this topic.

Offline lgee

  • post whore
  • *****
  • Posts: 1440
  • Karma: +15/-1
  • Gender: Male
  • Attesa Racer
    • WheelTech Racing
ABS fault codes and how to clear
« on: Jan 31, 2009, 05:02PM »
ok so i check my abs fault codes and i have a couple of issues, so how do clear the abs memory as the light comes on sometimes straight away sometimes not at all, i fixed the problems but it is still in the memory, and when i test it it blinks the same fault codes as before.

Offline Counterpunch

  • antrx.com senior member
  • ****
  • Posts: 344
  • Karma: +10/-2
  • Gender: Male
Re: ABS fault codes and how to clear
« Reply #1 on: Feb 19, 2009, 09:53PM »
Might be time to change the complete wheel hub.  I had that problem late last year.  Found a better condition second hand wheel hub to replace it with.  Be sure its from an HNU13 Attesa SR20DET model otherwise the ABS light will remain on.  The number of teeth on the hub will throw the ABS sensor out due to the different but compatible wheel shafts.  The light will then only turn on upon ignition start up once the problem is fixed.
RNU12 Bluebird SSS Attesa
HNU13 Bluebird SSS Attesa Ltd