[ antrx.com ]

U12 Bluebird, Pintara & Stanza => maintenance issues => Topic started by: pedro666 on Jun 23, 2013, 12:48AM

Title: tips in clutch pedal removal
Post by: pedro666 on Jun 23, 2013, 12:48AM
ok my clutch pedal is showing its age with the whole where the master sylinder joins the pedal .real loose do you of you know how to remove for repair?
Title: Re: tips in clutch pedal removal
Post by: pedro666 on Jun 24, 2013, 11:05PM
seems there is 3 bolts to remove as well as the master cylinder pin. maybe 2 sensors..
Title: Re: tips in clutch pedal removal
Post by: Kranzy on Jun 25, 2013, 04:41PM
Like I said to you the attachment between the pedal and master cylinder does have free play. The U-Bracket that the pin sits in and screws to the master cylinder is what you need to adjust.
Title: Re: tips in clutch pedal removal
Post by: pedro666 on Jun 25, 2013, 07:20PM
Yep I have noticed that bolt. We are pretty sure the hole is worn and will need to be welded up and re-drilled.It releases and sort of stops half way, the with a tap it continues. I will have another go at adjusting tomorrow if I get time.