Author Topic: FORGED U13 Engine  (Read 3037 times)

0 Members and 1 Guest are viewing this topic.

Offline BBYZilla

  • antrx.com newbie with pewbies
  • *
  • Posts: 6
  • Karma: +0/-0
FORGED U13 Engine
« on: Jun 26, 2014, 08:07PM »
Hey Guys i got this for sale atm, i believe it came with the intake side to, also have quad throttle bodies, etc i am wrecking a GTiR so have other parts also.

U13 SR20DET Complete rebuilt head + Forged engine

Long Motor

ENGINE:
- CP Forged Pistons 86.5MM 8:5:1 20thou oversize
- New piston rings
- SCAT H Beam Rods
- Full Balanced Bottom End
- AGGRESSIVE Ported heads
- ARP Head bolts + Studs
- Cosmetic head gasket
- Race Bearings
- Torque plate hone cylinder bore.
- Surface grind block.
- Polsihed journals on crank.
- Grinded head.
- Balanced Conrods
- Honed conrod little end
- Bead blasted sump
- buffed valves,
- checked valves and valve guides
- vacuum tested valves
- buffed ports & chambers in cylinder head
- lap valve to valve seat
- surface grind face of cylinder head
- valve stem seal set.

- Pistons have Valve reliefs cut in (need to double check if it was included, was a brief conversation i had with the engine builder)

May have missed a few extras (off top of my head)

This engine is brand spanking, has 0kms. Capable of 250KW - 300KW+ comfortably depending on turbo & Set up.


$3800 + Shipping

Im not always on here (just registered) hopefully i dont forget my password, either inbox or text 0403485395 am located in Victoria.
Cheers


 

Offline SR20ME

  • antrx.com full member
  • ***
  • Posts: 232
  • Karma: +1/-0
Re: FORGED U13 Engine
« Reply #1 on: Jun 28, 2014, 05:58PM »
I would advertise who built the engine and supplied it etc.

I'm sure its fine but buying engines second hand can be hit and miss so people are a little apprehensive unless they know a bit more about it.

Offline BBYZilla

  • antrx.com newbie with pewbies
  • *
  • Posts: 6
  • Karma: +0/-0
Re: FORGED U13 Engine
« Reply #2 on: Jun 28, 2014, 06:01PM »
Thats true! Was built by Mopower Race engine in QLD by Pete.
Built it off a mate in QLD and i took over on the build!
Cheers

Offline deviate

  • antrx.com senior member
  • ****
  • Posts: 429
  • Karma: +0/-0
Re: FORGED U13 Engine
« Reply #3 on: Jul 1, 2014, 05:00PM »
Could you post some pPics of paper work confirming the work done because as said above people can be a little iffy about secondhhand engines. Some people are less than honest

Offline SR20ME

  • antrx.com full member
  • ***
  • Posts: 232
  • Karma: +1/-0
Re: FORGED U13 Engine
« Reply #4 on: Jul 1, 2014, 08:30PM »
Probably pics of the cylinder head etc and if you did the build with installing pistons, any work / photos maybe of the short engine and reciepts always helps  ;D.

I'd advertise it on PGA (Pulsar forum Australia) as they have a lot of guys interested in doing sr20det conversions and Gumtree.


Offline BBYZilla

  • antrx.com newbie with pewbies
  • *
  • Posts: 6
  • Karma: +0/-0
Re: FORGED U13 Engine
« Reply #5 on: Jul 1, 2014, 08:54PM »
Thats fine guys id be more than willing to! Im waiting for my build sheet in the mail so hopefully over next few days... heres a few photos of the engine at the builders and at my house now... As far as PGA you need to make a donation before you can post in for sales -.-
I will post build sheet here AS SOON as it comes...
I must say never knew engine builders can be massive pain in the ass lol way to much back and forth and reminding -.-

IT WONT LET ME POST LINKS HERE for photos off tiny pic

I CAN SEND ANYONE PHOTOS EMAIL [email protected] or 0403485395 i can send them

Currently the head is off, so i can show people etc. and it DOES have valve reliefs cut into the pistons.
I also have the water lines, dizzy, and inlet manifold, aswell as other bits and bobs from the original U13 to go along with it.


Offline BBYZilla

  • antrx.com newbie with pewbies
  • *
  • Posts: 6
  • Karma: +0/-0
Re: FORGED U13 Engine
« Reply #6 on: Jul 1, 2014, 08:59PM »
Ive sent you a email with pics deviate cheers.

Offline deviate

  • antrx.com senior member
  • ****
  • Posts: 429
  • Karma: +0/-0
Re: FORGED U13 Engine
« Reply #7 on: Jul 2, 2014, 03:14PM »














Offline deviate

  • antrx.com senior member
  • ****
  • Posts: 429
  • Karma: +0/-0
Re: FORGED U13 Engine
« Reply #8 on: Jul 2, 2014, 03:15PM »

Offline BBYZilla

  • antrx.com newbie with pewbies
  • *
  • Posts: 6
  • Karma: +0/-0
Re: FORGED U13 Engine
« Reply #9 on: Jul 2, 2014, 06:42PM »
I have received the build sheet today... wouldnt have a clue how to attach it here lol



Offline deviate

  • antrx.com senior member
  • ****
  • Posts: 429
  • Karma: +0/-0
Re: FORGED U13 Engine
« Reply #10 on: Jul 2, 2014, 07:15PM »
You can email it to me

Offline BBYZilla

  • antrx.com newbie with pewbies
  • *
  • Posts: 6
  • Karma: +0/-0
Re: FORGED U13 Engine
« Reply #11 on: Jul 2, 2014, 08:15PM »
has been FWD cheers.. Bidding starts @ 3200...
http://www.ebay.com.au/itm/U13-Built-SR20DET-/301229301222?pt=AU_Car_Parts_Accessories&hash=item4622aa5de6

Need to finish off a S15 i bought at the auctions for dirt cheap to resell. $3200 saves you about 2k
« Last Edit: Jul 2, 2014, 08:17PM by BBYZilla »