[ antrx.com ]

antrx technical discussion => antrx noise => Topic started by: grogeye on Apr 17, 2012, 11:30PM

Title: Installing new audio system in the ol' Corsair Gl
Post by: grogeye on Apr 17, 2012, 11:30PM
Due to the shortage of clear information on installing 21st century audio gear in a 23-year-old Ford Corsair Gl, I've decided to recorded my adventure and discoveries. Hopefully it will be useful to fellow newbs.

Firstly, I have the age-old question of wires, but I've decided to present it with a video I took of the situation and what I think of it: [youtube]http://www.youtube.com/watch?v=2NIc4Z0mOqk&context=C451ccf0ADvjVQa1PpcFMQYVN5kRwwQMzxWS2SjxQe1R8sWWVD7uk=[/youtube]

your feedback would be greatly appreciated!

Edit: The questions I have are A.) was my analysis of the cables correct and B.) is that thick cable in fact the antenna?
Title: Re: Installing new audio system in the ol' Corsair Gl
Post by: Dazza on Apr 19, 2012, 04:35AM
I wasn't paying that much attention. But that sounds rite. and yes! the thick black cable is definitely the antenna. But basically look at the diagram, check online etc. Use a multimeter / voltmeter whatever u call it to make sure the wires are correct.
Title: Re: Installing new audio system in the ol' Corsair Gl
Post by: JAWSTRX! on Apr 19, 2012, 01:55PM
That Blue wire i used for the Remote wire to my amp.. Think it maybe the power wire to raise and lower the Power Antenna on Ti's & Ghia's...