[ antrx.com ]
antrx technical discussion => general technical discussion => Topic started by: SR20ME on Jul 6, 2015, 11:42AM
-
Hi guys
So got both front and rear hubs off a 1994 nissan maxima that was in good condition (had about 140,000kms).
I thought I'd get new bearings but I rang up Bursons. The front are $105 each new and the rear are $118 each new. Means if I get all 4 bearings and get them pressed in I'm looking around $500.
Is there a way I can test the bearings in the hubs without the hubs on the car? I think they are okay given the kms but better to check if there is a way to do so!
-
You have good taste.
-
The onlyoway I knowknow ofonce you've mounted itiall up wiggle the wheels left and right to see how much play there is
-
The onlyoway I knowknow ofonce you've mounted itiall up wiggle the wheels left and right to see how much play there is
Yep, that's pretty much the test I thought as well. Thanks though. Good to confirm the info