[ antrx.com ]

antrx technical discussion => general technical discussion => Topic started by: SR20ME on Jul 6, 2015, 11:42AM

Title: Front Wheel Bearings - Nissan Maxima
Post by: SR20ME on Jul 6, 2015, 11:42AM

Hi guys

So got both front and rear hubs off a 1994 nissan maxima that was in good condition (had about 140,000kms).

I thought I'd get new bearings but I rang up Bursons. The front are $105 each new and the rear are $118 each new. Means if I get all 4 bearings and get them pressed in I'm looking around $500.

Is there a way I can test the bearings in the hubs without the hubs on the car? I think they are okay given the kms but better to check if there is a way to do so!

Title: Re: Front Wheel Bearings - Nissan Maxima
Post by: Dullekeith on Jul 7, 2015, 08:44PM

You have good taste.

Title: Re: Front Wheel Bearings - Nissan Maxima
Post by: deviate on Jul 8, 2015, 08:48AM

The onlyoway I knowknow ofonce you've mounted itiall up wiggle the wheels left and right to see how much play there is

Title: Re: Front Wheel Bearings - Nissan Maxima
Post by: SR20ME on Jul 8, 2015, 04:11PM

Quote from: deviate on Jul  8, 2015, 08:48AM

The onlyoway I knowknow ofonce you've mounted itiall up wiggle the wheels left and right to see how much play there is

Yep, that's pretty much the test I thought as well. Thanks though. Good to confirm the info