comparing from the FSM to this:
i had come up with this, please let me know if im wrong...
Standard ECU: Megasquirt 2:
Injectors
101 white/black 32-
110 yellow/black 33 - DIrect connection to MS2
103 green/black 34-
112 blue/black 35-
Dizzy & crank angle sensor (-) is 2 (+) is 24 unsure which 2 wires go to +/- as it doesnt display in FSM
22/30 green/black Tee in for signal
31/40 green/yellow
TPS/TPS idle (5verf) is 26 (signal) is 22, 4 wires with 2 inputs, what goes where ?
37 light green/red Tee in for signal
20 white
33 yellow/white
44 yellow
Coolant temp/air temp
18/21 blue/orange-pink/black 21- Tee in for signal
26 brown 20-
Gearbox speed
32 red/blue (unknown pin) - Tee in for signal
02 sensor
19 white 23 - Direct Connection
Start signal fron igntion switch
34 green/yellow 37 - Tee in for signal
ignition coil output (-)
36 black/white 36 - direct maybe ?
Power transistor NO CLUE
3 yellow/red
1 white
Radiator fans (both unknown pins) - Direct connection
9 orange/blue
10 orange
Fuel pump switch/relay
104 red/blue 30 - direct maybe ?
Let me know if I have missed anything out and help me fill in the gaps, cheers.