[ antrx.com ]
general => the n00bs faqs & safety zone => Topic started by: mendezcr on Oct 29, 2010, 03:18PM
-
Hi to all,
I have read a lot of forums about what clutch from other cars like the GTiR U13sr20det AWD, etc.. fit on the HNU12 and everywhere I read someone always say something differently so I need your guys help with this, what clutch kit will fit to my car??
Also with the engine mounts.. are they the same as a normal SR20? o they are differently because of the position of the gear box for being AWD?
Thxs.....
-
simple one :)
S13 Clutchs fit no dramas, can get the GTiR clutchs to fit and the HNU13 also
the engine mounts are specific to the FWD/AWD Layout, S13-15 will not fit
-
Thxs Crazy!! Appreciate the info... Now I have to start looking ebay and other places for them.... Also i taking advantage from your experience, what springs can I use to lower my bluebird do you now?Same thing what spring from other cars fit the Bluebird HNU12 AWD?.. I'll appreciate if you or some one can help me with this info. I saw you guys have the Kings Springs manufacture there in Australia. In my country is really hard to get parts for my bluey thats why I ask what parts from other cars fit's mine so I can find them easier.... :-\ :-\ :-\
Again thxs for the valuable info Crazy!! ;D ;D ;D
-
Just on the clutch thing, take your thrust bearing with you when you go to buy, There are that many different thrust bearings for SR20's it's not funny. I know the pain of having the wrong one.
-
just to throw a curve ball in, the extreme clutch i bought as a GTIR unit was actually a RB20DET same size and config and it works
-
Yes, but should also be noted that if you get a GTiR setup, you need the GTiR flywheel aswell.
-
Thats why I really need to get that clear because I need to buy it online, in my country is only one store selling real performance parts and they don't have it.. >:( >:(
-
Ok... Then the S13 - U13 and the RB20DET work perfectly on the HNU12 and the GTiR not because of the flywheel, right??..... 8) 8)
-
thats right, if you get a gtir one get a kit with flywheel
if you get a S13 one you can just get the clutch disc and pressure plate
-
What throw out bearing should we be using. I have a feeling I've been using the wrong one.
Knowing my luck it's going to be no way of knowing.
-
Great info!!! really appreciate this!!.... I bought the engine mounts already just need to look for the s13-u13attesa-RB20det, buy it and do everything all together.... Also want to lower the suspension I read that the U13attesa-GTiR use the same one than the HNU12attesa is that right?..Or if you guy have any experience or heard what other suspension kits or springs form other cars fits on the HNU12?.... :-\ :-\
Thank you all for you help I appreciate it!! ;D ;D ;D ;D ;D
-
Gtir's are different, ALl suspension from U12 or U13 will fit both U12 and U13, FWD or AWD.
-
Thxs for the feedback Luke.. I will start looking for coil overs or springs from those cars...
Mmmmmm.. question... The U13 in here is known as Nissan Altima (there really a few bluebirds) are they the same?.. ::)
Thxs!!! ;D ;D
-
Yes
-
Bad news for me... I asked for Urethane engine mounts for my car and they gave me the b13 SR20 engine mounts and said that were the same, but they are not, the front and back mounts are different, now I can't get a refund on the $$ due to store company policy, I need to change it for something in the same store. They don't know witch one are the ones that fit. Do any of you guys have a link or something with detailed photos and a description saying that its for my car or that are from other car but fit mine so they can buy them because now i can't due to the refund... >:( >:( >:( >:(...
Sorry for asking too much but this are questions that I will never ask again I am writing everything in a note book because I don;t even have the service manual for the HNU12... :-\ :-\
Thxs... :) :)
-
Probably GTiR mate... otherwise known as a Nissan Sunny in canada and the UK
-
No one in stores know what this car is, they are almost always wrong... do your research first.
-
download nissan Fast program, has all the details in the program for the U12 and the part numbers
part numbers for all engine mounts are as follows:
Rear engine mount : 11360-76E00
Rear Gearbox Mount : 11320-78E00
Front Gearbox Mount : 11220-79E00
Front Engine Mount : 11350-76E00
Drivers Side Engine Mount : 11210-76E02
these are original Nissan Mount Part Numbers
-
Ok Craazy I will take these parts #'s and talk with the Nissan Agency in here... Obviously they are not going t have them, but at least they would tell me what mounts from other cars fit mine.. Thxs Craazy!!
I will also look to some GTiR that some guys have in here and compare if the engine mounts are the same..Thxs for the heads up Budgie....
Yes Luke now i know that they are almost always wrong specially with these car.. I use to have an Honda and it was really easy..
Sorry if I ask too much but the only forum I trust right now is ANTRX, you guys have a lot of experience with these particular cars, I just started with Nissan and with a really complicated car in manner of getting parts and performance so bear with me jajaja.. This are questions that I will never ask again, plus I don't have the service manual of this car, I'm making my own manual for futher problems just in case..
-
Hi guys...
Need help with the engine mounts :o :o.. Need a link... EBAY-AMAZON- What ever - I had no luck finding them here at all. With the part #'s it's only one company and I don't even recognize the language...The Nissan agency wasn't a lot of help either...... I need to get thats fix as soon as possible I would appreciate if you guys give a a huge hang with this :-\ :-\ ...
Thxs!!
-
ther is a copy of the workshop manual on here try the search should be easy to find. you can get mounts genuine still
-
Thxs.. Pedro... I'll start searching then.... BTW Pedro were are you from?..
-
gold coast , queensland . i found that shovel...time to dig up an elderly thread ::)