no clock, you cant be happy with that! is that just a fake panel thing there where the digital clocks normally go?
All the Executive and GLi Pintaras came without a clock there, and yes, it is just a filler plate thingy. The vent section is
exactly the same whether you have a clock or not. I put the clock out of my Corsair in my Pintara a week after I got it. All the wiring for the clock is already there too.
Waldo, I'd scan you the pages out of the user's manual for how to set the clock, but I don't have a working scanner.
Here's what the manual says:
With the radio off, press the 'CLK' button and, at the same time turn the radio on.
Release the clock button. the clock will be displayed with the minute digits flashing.
use the up and down button to adjust the minutes display.
press the 'clk' button to switch between minutes and hours.
turn off the radio when you're done and the seconds will reset to 00 and the clock will start normal operation.
There is a small 'P' to the right of the display to signify PM