[ antrx.com ]
U12 Bluebird, Pintara & Stanza => performance and handling => Topic started by: NixTrx on May 24, 2009, 07:47AM
-
Does anone know where i can get a exhaust manifold to suit the u12 ka24et
-
ebay usa
-
wont that be for rwd?
-
ebay usa is the only place I know of. They come a 240sx and last I checked it was going to cost an grand to land one here, but not sure if it would fit as they a rwd.
-
grand, maybe cheaper to find somewhere to get a custom one done, even ciramic dipped..??
-
a good shop would be able to make you one for $600-ish locally i reckon.
-
If its for a FWD i have noss's old one you could have
-
what do you want for noss's old one?
-
here is one from the usa http://cgi.ebay.com/ebaymotors/89-90-Nissan-S13-240SX-KA24E-Turbo-Manifold-kit_W0QQcmdZViewItemQQ_trkparmsZQ7c301Q3a0Q7c293Q3a1Q7c294Q3a30QQ_trksidZp4634Q2ec0Q2em14Q2el1262QQhashZitem2ea227776dQQitemZ200288991085QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
-
guys, don't mean to throw a spanner in the works, but unless you want to relocate your alternator and change the top inlet on the radiator, ANY S13 sohc turbo manifold won't fit on a U12.
The flange for the turbine housing needs to be offset toward the distributor to be of any use.
-
I have been told of another place in QLD by my mate, that will do a full kit for around $900. Just waiting for the web site off him.
These are custom made for what ever engine you have ;D
-
Mate, i'd be very wary of that sort of place, a decent fabricator will charge a lot more to built a great manifold.
-
I have been told of another place in QLD by my mate, that will do a full kit for around $900. Just waiting for the web site off him.
These are custom made for what ever engine you have ;D
As in with Turbo, piping, manifold, injectors etc etc? If that's the case than +1 on what Adam said.
-
Thanks for that SSS I will be, but if I get one from the US
-
guys, don't mean to throw a spanner in the works, but unless you want to relocate your alternator and change the top inlet on the radiator, ANY S13 sohc turbo manifold won't fit on a U12.
The flange for the turbine housing needs to be offset toward the distributor to be of any use.
...what he said
(http://i273.photobucket.com/albums/jj206/sleepaTi/Picture002.jpg)
-
Where did you get yours SleepaTi?
-
mine is from ebay usa, it's meant to be a topmount for a 240sx but i'm running it as a low mount..just flipped it over
but....mine is a twin cam, i was only pointing out what sss meant about the offset & the top rad hose problem
-
Oh yeah I had never noticed that Adam.
Aussie dollar is creeping back up there, give it 6 months we might be above 85c before it dips agian, then you can get american stuff pretty cheaply.
-
Thanks SleepaTi ;D
-
just been looking @ pic's of manifolds on google and forums pic's i still cant find anything that is even close to what mine looks like :(
-
The pic SleepaTi showed is for a DET engine
Entirely different from a SOHC
I made mine, took a day and $120
Can hook up a pic if ur still looking