[ antrx.com ]
general => general discussion => Topic started by: mendezcr on Oct 13, 2013, 02:11PM
-
Have any of you seen a Top Mount manifold in a U12? Well I did and now I am installing the front intercooler and after that NISTUNE inside 8)
http://img855.imageshack.us/img855/7465/22fg.jpg
-
Not the final job, some ideas, I will post when its done ;D
http://img15.imageshack.us/img15/1007/0p0u.jpg
http://img18.imageshack.us/img18/3523/ezyd.jpg
Found a problem with thi design but we got another idea... Will post pictures with the new idea but the a/c will be sacrisfied .. will fix that later ..
http://img818.imageshack.us/img818/2194/rf8j.jpg
What do you guys think?? I hope this help a little bit if someone is doing the same with a Top Mount Manifold
-
Like the look of the top mount manifold, but don't like the look of that 'low' hot side cooler piping!
So close to the ground mate. Why not go around the drivers side?
Some pics of my setup in this thread...
http://www.antrx.com/smf/index.php/topic,16417.240.html
-
Yeah, we were trying to have the hot pipe pass under and behind the bumper so we dont have to cut any metal, but we are actually do the same thing you did but a little more differently due to the downpipe, I will place one of the slim fans in front to have more space and turn the Turbo a little bit more so the oil lane wont be on the way. I will try to post more pictures tomorrow. I pull out my ECU already so the NISTUNE can be installed.
The thing is that I did not find any thread with a top mount turbo set up. If its one, well I spend 2hrs looking at the wrong threads.
Thanks for the pictures Budgie.
-
Some pics of how it goes...
http://img854.imageshack.us/img854/3439/cc1b.jpg
http://img571.imageshack.us/img571/7684/y6t2.jpg
http://img801.imageshack.us/img801/9393/ouee.jpg
-
that is similar to how mine is mounted, secure a metal piece to the latch brace then bracket
http://www.antrx.com/smf/index.php/topic,16260.60.html
about halfway down the page.