I've run through the FSM, and can't find good diagrams of what I'm looking for exactly. I've (obviously) located the solenoid tray, i know which solenoid is responsible for the SCVs, however my problem is where all the tubing is supposed to run. FWIW i've only been able to find swirl control valve information on ES-87, ES-194(a), ES-217(b) Pics below;
I'm assuming this is a vacuum canister. The connection FROM canister to the solenoid tray exists, but the connection to the canister via a one way valve doesnt. So I have no idea what I'm supposed to be connecting here, all I can ascertain is that it *must* be in that direction. I'm going to gather from the FSM it's a little before it, but I can't actually see what I'm expecting to see.. =/
I've no idea where the SCV actuator actually *is*, since the FSM provides the most descriptive and detailed diagram
From what I can manage, this blocked capped off piping is the actuator?
If so, I'm terribly confused about the difference in diameter between the hoses holding the vacuum at the solenoid tray and the hose that would run to here. I'm obviously missing something inbetween? =/
I guess that would be related to where the heck this fella goes;
That's the SCV connection going from the solenoid tray to the valve, according to the FSM. I've no idea where it's supposed to connect up to though. I'm assuming, as mentioned above, that it doesn't go straight onto that capped off section of intake due to the diameter difference.
*phew* long post, got there in the end, any help will be appreciated. Cheers guys!