[ antrx.com ]
U12 Bluebird, Pintara & Stanza => the style department => Topic started by: peopleman on Jul 5, 2010, 02:36PM
-
Hey Guys,
I just purchased a a ford cosair ( with a nissan engine in it), seems to run pretty smoothly. I have a few issues tho with it, i only paid 800 bucks for the car..and therefore the car wasnt in tip top condition as you would assume.( i still need to rigure out how to get the techometer working, and temp gauge)
I was hoping that the manual that i downloaded would be able to assist me on a few of these things. Anyways the roof was in really bad condition, and i went ahead and purchased some fabric and ended up changing the roof to a red velvet!! looks absolutely amazing. Will upload pics very soon! But can anyone give me any advice on how to remove the panel.
Thanks you
-
Door cards have been covered many times before! Have you got power windows or manual winders?
There are a couple of screws in the arm rest (2 on non-power windows, 3 on power windows plus one to hold the pad onto the plastic moulding), the surround of the door handle unclips, remove the window winder if it has one then pop the clips around the outside of the door card, and lift it off the top of the door.
-
Thanks for the reply! My only concern regarding the door is actually the handle to open the door. I feel as if there is a screw in there somewhere but i cant seem to find it. Iv removed the arm rest, the manual window arm and the clips, but i feel as if i need to disconnect the spring for the latch, and i am scared as i dont want to ruin it.
-
Thanks for the reply! My only concern regarding the door is actually the handle to open the door. I feel as if there is a screw in there somewhere but i cant seem to find it. Iv removed the arm rest, the manual window arm and the clips, but i feel as if i need to disconnect the spring for the latch, and i am scared as i dont want to ruin it.
You don't need to remove the handle.. only the small frame around it which should pop off. Than you can take off the door card.