[ antrx.com ]

general => general discussion => Topic started by: Wildwest on Jan 26, 2019, 03:41PM

Title: Pintara ka24e fwd
Post by: Wildwest on Jan 26, 2019, 03:41PM
Hi all

I have a trx  ka24e with a crack in block which runs across cylinder wall . Is this a common problem  ?  Other than this the engine was perfect . Will a ka24de or an sr20det swap over without too many mods ?

Thanks
Title: Re: Pintara ka24e fwd
Post by: deviate on Jan 27, 2019, 10:54AM
Hey mate, cracks in the block definitely aren't common, a ka24de engine swap is relatively straight forward you're best off getting a wreck to do it though.

You'll need some connectors, ECU and mounts from the donor car. Plus there's a little wiring involved, nothing too drastic.
Title: Re: Pintara ka24e fwd
Post by: Wildwest on Jan 27, 2019, 12:29PM
Thanks for the info . Will the ka24de engine mount up too pintara  5 sd gearbox ?
Title: Re: Pintara ka24e fwd
Post by: deviate on Jan 27, 2019, 03:52PM
Sure does, she'll bolt straight up
Title: Re: Pintara ka24e fwd
Post by: Wildwest on Jan 27, 2019, 04:12PM
Thanks for your input .one last question will the pintara gearbox mate up to the sr20det engine . H
Title: Re: Pintara ka24e fwd
Post by: deviate on Jan 27, 2019, 05:33PM
I'm not 100% if it's a straight fit, it has been done though, check out kranzy. He did it
Title: Re: Pintara ka24e fwd
Post by: Wildwest on Jan 30, 2019, 02:39PM
Are seals and bearing available for distributor for ka24de bluebird . If so who sells them  and does anyone know part numbers .
Title: Re: Pintara ka24e fwd
Post by: Wildwest on Feb 13, 2019, 04:03PM
Can anyone tell me if the ecu from  an auto ka24de is any different from a manual gearbox set up .. will they interchange .

Thanks