[ antrx.com ]

U12 Bluebird, Pintara & Stanza => maintenance issues => Topic started by: Pure_Sincerity on Sep 20, 2011, 11:21PM

Title: u12 heating issues
Post by: Pure_Sincerity on Sep 20, 2011, 11:21PM
hey guys my car seems to be heating pretty fucking fast lately, drive for 20 or so minutes and the heating guage is above half and the front mounted thermos cut in, they are the only thing stopping it from boiling. What could the problem be ?
Title: Re: u12 heating issues
Post by: Kranzy on Sep 21, 2011, 12:02AM
Stuck thermostat? Might not be opening and hence overheating.
Title: Re: u12 heating issues
Post by: Cheezel on Sep 21, 2011, 09:56AM
I had the same issue except my temp gauge sensor packed up on me as well.
What kranz said. Or water pump might have packed up, but thermostat is more likely.
Title: Re: u12 heating issues
Post by: Pure_Sincerity on Sep 21, 2011, 10:11AM
I replaced the waterpump less than 100kms ago ^_^ wheres this temp gauge sensor ?
Title: Re: u12 heating issues
Post by: Cheezel on Sep 21, 2011, 10:19AM
Well yours is working fine since it's telling you it's hot. It's just the sensor responsible for being all "hai mr temp needle, you need to move now ^__^" but FWIW it's just before the coolant outlet pipe at the back of the block, near the plenum/intake mani. There's two plugs, one with a red cap (if you remove this your fans turn on automatically), and the other is the temp gauge sensor.

Check you don't have a blocked radiator? If you changed the waterpump, I'm guessing that you flushed the radiator etc...
Title: Re: u12 heating issues
Post by: mudmav on Oct 6, 2011, 07:22PM
mine gets to the second mark in the middle quick but never goes any higher